MCP3422A1-E/MS - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
MPN: MCP3422A1-E/MS ✓ פעילMCP3422A1-E/MS סקירה
An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into digital codes for processing, measurement, storage, or control. The MCP3422 belongs to the delta-sigma ADC family within the broader ADC and data-conversion IC hierarchy. Delta-sigma conversion is especially useful when low noise, high effective resolution, and simple analog front ends are more important than very high conversion speed.
The MCP3422A1-E/MS provides two differential input channels and converts analog inputs to digital codes with up to 18 bits of resolution. Its onboard precision 2.048 V reference establishes a differential input range of plus or minus 2.048 V. The device operates from a single 2.7 V to 5.5 V supply and supports standard, fast, and high-speed I2C-compatible modes, giving designers flexibility in bus speed and system partitioning.
The converter's sigma-delta architecture is suited to slow-changing sensor signals rather than high-frequency waveform acquisition. At 4 samples per second, it prioritizes noise rejection and resolution for pressure, temperature, chemical, potentiometric, and bridge-based measurements. Its two-channel architecture allows paired or differential sensing while keeping the analog front end compact, and its MSOP-8 form factor supports space-constrained instrumentation.
Typical applications include industrial process monitoring, portable sensor instrumentation, battery-powered measurement systems, laboratory data acquisition, and low-rate environmental sensing. Differential inputs are particularly useful when measuring small signals stacked on larger common-mode voltages or when reducing errors from ground offsets and coupled noise.
Designers should place input filtering and protection close to the converter, route analog and digital signals carefully, and use suitable bypass capacitors around the supply pins. Because conversion is intentionally low-rate, the device should not be selected for sampling fast transients or wideband waveforms unless the complete signal chain can deliver the required bandwidth and conversion performance.
This product record combines the manufacturer's converter specifications with package, sourcing, drop-in comparison, and design guidance for engineers evaluating the MCP3422A1-E/MS. It also highlights the practical distinction between low-noise precision conversion and high-speed data acquisition so the correct ADC architecture can be selected for the measurement task.
חלופות תחליף ישיר עבור MCP3422A1-E/MS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MCP3422A5-E/MS
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MCP3422A0-E/MS
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCP3422A1T-E/MS
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MCP3422A1-E/MS דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 18 bits |
| Input Channels | 2 channels |
| Input Configuration | Differential |
| Converter Architecture | Delta-sigma (Delta-Sigma) |
| Maximum Conversion Rate | 4 samples per second |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | Plus or minus 2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Interface | Two-wire I2C-compatible serial interface |
| I2C Supported Modes | Standard 100 kHz, fast 400 kHz, and high-speed 3.4 MHz modes |
| טווח טמפרטורת פעולה | -40 degrees C to +125 degrees C |
| מארז | 8-MSOP |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של MCP3422A1-E/MS 8-msop
תצורת פינים עבור MCP3422A1-E/MS (מארזת 8-msop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור MCP3422A1-E/MS.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MCP3422A1-E/MS מתאים עבור 6 יישוםs: Industrial Process Monitoring, Portable Sensor Instrumentation, Environmental Monitoring, Laboratory Data Acquisition, Battery-Powered Measurement, Precision Bridge Sensor Interface.
Industrial Process Monitoring
The MCP3422A1-E/MS is appropriate for slow industrial measurements such as pressure, temperature, level, and chemical sensor outputs. Its two differential channels can accept small sensor signals while rejecting common-mode voltage, and the 18-bit resolution preserves fine code-level detail when the input is scaled into the plus or minus 2.048 V differential range. Operating from 2.7 V to 5.5 V simplifies integration near sensors and remote acquisition nodes. The 4 sample-per-second rate is well matched to slowly changing process variables, although the analog front end still needs surge protection, filtering, calibration, and careful grounding.
מומלץ
Portable Sensor Instrumentation
The MCP3422A1-E/MS fits portable and field-measurement equipment that records low-frequency sensor data from a single low-voltage supply. Its 2.7 V minimum supply voltage supports compact battery-powered designs, while the 18-bit delta-sigma conversion provides high effective resolution without a high-speed sampling system. Two differential inputs make it practical for paired probes or bridge sensors, and the 2.048 V onboard reference provides a defined conversion scale. Designers should account for the 4 sample-per-second acquisition rate and include suitable input filtering, protection, and a host interface capable of supporting the selected I2C mode.
מומלץ
Environmental Monitoring
The MCP3422A1-E/MS can digitize outputs from humidity, gas, pH, and conductivity sensors whose signals change relatively slowly. Its differential input arrangement helps reject environmental electrical noise and ground-potential differences common in distributed sensing networks. The 18-bit resolution can reveal small sensor changes after the signal is conditioned into the converter's plus or minus 2.048 V differential range. Because the conversion rate is 4 samples per second, the device is best suited to periodic logging rather than high-speed transient analysis. Use low-leakage input protection and stable filtering to preserve measurement accuracy between updates.
מומלץ
Laboratory Data Acquisition
The MCP3422A1-E/MS is useful for laboratory instruments that measure dc or low-frequency analog quantities with high resolution and low conversion speed. Two differential channels allow the acquisition system to compare a sensor against a reference or capture complementary bridge outputs. The onboard 2.048 V reference and 18-bit conversion establish a precise digital code range, while the I2C-compatible interface simplifies connection to an embedded controller. The 4 sample-per-second rate supports stepped or slowly swept measurements, not high-bandwidth scopes, and calibration should account for reference accuracy, offset error, gain error, and analog-front-end settling.
מומלץ
Battery-Powered Measurement
The MCP3422A1-E/MS supports low-power battery-powered instruments because it accepts a single supply from 2.7 V to 5.5 V and performs measurements at a controlled 4 samples per second. A system can leave the converter idle between updates when its operating modes allow it, reducing unnecessary activity in remote nodes. Two channels reduce the number of separate converters needed for paired measurements, while the 18-bit delta-sigma architecture favors low-noise resolution. Power-budget calculations should include the converter's actual operating and standby currents, regulator losses, sensor excitation, and communication activity rather than relying on converter headline specifications alone.
מומלץ
Precision Bridge Sensor Interface
The MCP3422A1-E/MS is appropriate for resistive bridge sensors such as strain, load-cell, and pressure elements when the conditioned bridge output is differential and slow-changing. Two differential channels can support redundant sensing or paired bridge measurements, while the 18-bit resolution improves sensitivity to small fractional changes in bridge voltage. The plus or minus 2.048 V differential range and 2.048 V internal reference simplify fixed-scale excitation schemes. Layout must preserve symmetry between bridge legs, minimize converter and excitation ground-potential error, and provide filtering that does not introduce excessive settling delay at the 4 sample-per-second conversion rate.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCP3422A1-E/MS — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MCP3422A5-E/MS | MCP3422A0-E/MS | MCP3422A1T-E/MS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 18 bits | 18 bits | 18 bits | 18 bits |
| Input Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Converter Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Internal Reference Voltage | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | Plus or minus 2.048 V | Plus or minus 2.048 V | Plus or minus 2.048 V | Plus or minus 2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Interface | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible |
| Variant Identifier | A1 | A5 | A0 | A1T |
מבדילים עיקריים
- High nominal resolution in a compact dual-channel converter (לעומתMCP3422A5-E/MS)
- Two differential channels in an 8-MSOP footprint (לעומתMCP3422A0-E/MS)
- Defined 2.048 V differential measurement range (לעומתMCP3422A1T-E/MS)
הערות תכנון
Route the two differential input pairs as compact, symmetric paths and keep switching-node or high-current supply traces away from the converter. Place input protection and filtering components close to the associated pins so unwanted energy is diverted before reaching the ADC. For bridge sensors, match input trace geometry and component placement to reduce conversion of common-mode noise or supply gradients into differential error.
The MCP3422A1-E/MS operates from a single 2.7 V to 5.5 V supply. Place the manufacturer's recommended bypass capacitance at the supply pins and provide a low-impedance return path to the device ground. Because the 2.048 V onboard reference defines the conversion scale, reference noise, supply ripple, and analog ground movement can affect accuracy. Keep the reference and input return paths away from switching-converter return currents.
The 4 sample-per-second conversion rate is suited to slow sensor signals, so the analog input network can generally use effective low-pass filtering to suppress broadband noise. Confirm that filter settling is compatible with the selected conversion cycle and operating mode. Anti-aliasing design must also account for the converter's documented digital filter and timing rather than relying only on an arbitrary RC corner frequency.
Do not select this converter for high-frequency waveform measurement merely because its nominal resolution is 18 bits. Its 4 sample-per-second maximum rate and delta-sigma filtering define a different bandwidth relationship from a conventional SAR converter. Also verify differential input polarity, common-mode limits, source impedance, and I2C addressing in the manufacturer datasheet before finalizing the analog and digital interfaces.
מידע על תאימות
The exact MCP3422A1-E/MS ordering code has no direct compliance declaration in the cited product record. Compliance fields remain unknown rather than being transferred from a different ordering suffix.