Microchip Technology

MCP6022-E/SN - 10 MHz Dual RRIO Op Amp | Microchip

MPN: MCP6022-E/SN ✓ Aktif
Less than 0.5 mV Vdss 1.0 mA Id SOIC-8, 4.9 mm x 3.9 mm Package
MOQ: 1 |

MCP6022-E/SN Genel Bakış

The Microchip Technology MCP6022-E/SN is a dual, rail-to-rail input and output CMOS operational amplifier with a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, and input offset voltage below 0.5 mV. The device is packaged in an 8-pin SOIC and supports single-supply operation from 2.5 V to 5.5 V, making it suitable for low-voltage battery-powered and portable systems.

An operational amplifier is an analog signal-conditioning IC that uses high open-loop gain to amplify the difference between its two inputs. Negative feedback creates a stable closed-loop gain and determines bandwidth, noise gain, output impedance, and common-mode behavior. The MCP6022 belongs to the CMOS operational-amplifier family, combines two independent amplifier channels in one package, and supports rail-to-rail operation, which broadens the usable input and output range within its supply limits.

The two channels provide a 10 MHz gain-bandwidth product, low input offset voltage below 0.5 mV, and low typical operating current of 1.0 mA. Microchip describes low noise of 8.7 nV/√Hz and low total harmonic distortion plus noise of 0.00053%. Rail-to-rail input and output capability allows the amplifier to process signals near either supply rail, while the low operating current supports portable equipment and battery-operated instrumentation.

The MCP6022 family uses Microchip's advanced CMOS process to provide low bias current, high open-loop gain, high speed, and low power consumption. These characteristics suit general-purpose amplification, filtering, buffering, and gain-stage tasks where a compact dual amplifier is preferable to two separate single-channel packages. The -E/SN ordering code identifies the extended-temperature SOIC configuration for industrial and commercial equipment.

Typical uses include microphone preamplification, sensor signal conditioning, audio and communication channels, active filters, and low-voltage data acquisition. In a portable sensor interface, the MCP6022 can buffer a high-impedance source before an ADC. In an audio design, one channel can provide gain while the other drives a monitoring buffer. Rail-to-rail swing is especially useful when the signal must remain within a narrow low-voltage range.

Design the circuit with adequate input common-mode voltage, output headroom, stable feedback networks, and decoupling capacitors close to the supply pins. Avoid placing the feedback network far from the amplifier because parasitic capacitance can reduce bandwidth and encourage oscillation. Select external resistor and capacitor values against the gain-bandwidth product, and verify operation across the full supply range and temperature range of the assembled system.

This page combines the manufacturer's operating characteristics, package and pin information, drop-in comparison guidance, and practical circuit-design notes. These engineering references help distinguish the MCP6022-E/SN from lower-speed, higher-current, or different-pinout amplifiers before it is approved for a PCB design.

Drop-in alternatifler için MCP6022-E/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MCP6022-E/SN (aynı form faktörü ve ayağa oturma) — farklı olan Package, Amplifier Type, Input Offset Voltage, Number of Channels, Output Swing.

Microchip Technology
Package: 8-pin SOIC (SN)
Number of Channels: 2 (dual)
Microchip Technology
Package: 8-pin SOIC
Amplifier Type: Single-circuit general-purpose operational amplifier
Input Offset Voltage: Less than 0.5 mV typical
Microchip Technology
Package: 8-pin SOIC
Amplifier Type: Dual general-purpose operational amplifier
Input Offset Voltage: <0.5 mV
Microchip Technology
Package: 8-pin SOIC (SN), 3.90 mm body width
Amplifier Type: Standard (General Purpose)
Number of Channels: 2

MCP6022-I/SN

✅ Yerleştirme
Microchip Technology
📦 SOIC-8
Dual general-purpose operational amplifier · 2 channels · 10 MHz · 1.0 mA · <0.5 mV · 8.7 nV/√Hz · 0.00053% THD+N · Rail-to-rail input

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP6022T-E/SNVAO

✅ Yerleştirme
📦 SOIC-8
MCP6022-family temperature-grade and ordering-code suffix differ; core 10 MHz dual-amplifier architecture is retained, while the cited excerpt does not quantify offset or noise differences.

📋 Katalogda Olmayan Referans Alternatifi

MCP6022T-I/SNVAO

✅ Yerleştirme
📦 SOIC-8
MCP6022-family temperature-grade and ordering-code suffix differ; core 10 MHz dual-amplifier architecture is retained, while the cited excerpt does not quantify offset or noise differences.

📋 Katalogda Olmayan Referans Alternatifi

MCP6002-I/SN

✅ Yerleştirme
Microchip Technology
📦 SOIC-8
2 (dual) · 1 MHz (typical) · 0.6 V/us (typical) · 1.8 V to 6.0 V · 100 uA (typical) · 1 pA (typical) · 90 degrees (typical)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP6002-E/SN

✅ Yerleştirme
📦 SOIC-8
MCP6002 is a lower-bandwidth family; the MCP6022 provides 10 MHz gain-bandwidth product, while an exact numeric bandwidth difference is not stated in the cited excerpt.

📋 Katalogda Olmayan Referans Alternatifi

MCP6022-E/SNVAO

✅ Yerleştirme
📦 SOIC-8
Same MCP6022-E family and electrical class with a different order-code suffix; the cited excerpt establishes comparison but does not quantify suffix-specific electrical changes.

📋 Katalogda Olmayan Referans Alternatifi

MCP6022-E/SN Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Amplifier Channels 2 channels
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA
Input Offset Voltage Less than 0.5 mV
Supply Voltage Range 2.5 V to 5.5 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Input Noise Density 8.7 nV/√Hz
Total Harmonic Distortion Plus Noise 0.00053%
Pin Sayısı 8 pins
Paket SOIC-8, 4.9 mm x 3.9 mm
Lead Pitch 1.27 mm
Montaj Türü Surface mount

MCP6022-E/SN Pin Yapısı

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUTA — Operational amplifier A output
Pin 2 INA− — Inverting input for operational amplifier A
Pin 3 INA+ — Non-inverting input for operational amplifier A
Pin 4 V− — Negative supply voltage
Pin 5 INB+ — Non-inverting input for operational amplifier B
Pin 6 INB− — Inverting input for operational amplifier B
Pin 7 OUTB — Operational amplifier B output
Pin 8 V+ — Positive supply voltage

Tipik Uygulamalar

MCP6022-E/SN için uygundur 6 uygulamas: Portable Sensor Signal Conditioning, Audio Preamplifier and Monitoring Buffer, Low-Voltage Active Filtering, Battery-Powered Instrumentation, Communications Interface Buffering, Data Acquisition Front End.

🧩

Portable Sensor Signal Conditioning

The MCP6022-E/SN fits portable sensor interfaces that operate from 2.5 V to 5.5 V and require two independent amplifier channels. Its 10 MHz gain-bandwidth product is comfortably above the bandwidth normally required for temperature, pressure, or slow chemical sensors, while the 1.0 mA typical operating current helps limit battery drain. Place the amplifier close to the sensor to minimize interference pickup, use short feedback paths, and bypass the supply pins locally. The rail-to-rail input and output characteristics allow useful signal levels even when the sensor output lies near either supply rail. In a two-stage design, one channel can amplify the sensor signal and the other can buffer the result for an ADC.

🎧

Audio Preamplifier and Monitoring Buffer

The MCP6022-E/SN provides two channels for compact audio preamplification or active monitoring. Its 8.7 nV/√Hz input-noise density, low offset voltage below 0.5 mV, and 0.00053% THD+N specification make it suitable for clean, low-voltage audio gain stages. One channel can provide the principal gain path while the other can buffer an output for monitoring or feed another converter. The 10 MHz gain-bandwidth product supports moderate audio-bandwidth closed-loop gains with ample margin. Keep the input return path short, use balanced resistor values where practical, and confirm that the output remains within the required headroom at peak signal levels.

⚡

Low-Voltage Active Filtering

The MCP6022-E/SN is appropriate for first- and second-order active filters built around a 2.5 V to 5.5 V supply. Its 10 MHz gain-bandwidth product allows useful closed-loop bandwidth at several common closed-loop gains and reduces the likelihood that the amplifier becomes the limiting element in precision filter designs. Two amplifiers in one SOIC-8 package can implement a second-order active filter or separate two filter channels. Component tolerances and the amplifier's actual gain-bandwidth response determine the realized cutoff and phase behavior. Verify stability, common-mode range, and output swing across temperature rather than relying only on nominal filter equations.

🏭

Battery-Powered Instrumentation

The MCP6022-E/SN suits low-power instrumentation that must balance signal bandwidth, common-mode range, and supply efficiency. A typical operating current of 1.0 mA allows both amplifier channels to operate from a compact battery-regulated rail, while rail-to-rail inputs help preserve measurement span in a 3.3 V or 5 V system. The amplifier can condition a bridge, transducer, or resistive sensor before digitization. For best results, use a low-reference-voltage ADC, maintain common ground paths, and include power-supply filtering that does not add excessive board area. Because input bias current, offset, and temperature drift affect high-impedance sources, those parameters should be checked against the sensor impedance.

🌐

Communications Interface Buffering

The MCP6022-E/SN can provide input buffering, gain, and level conditioning in low-voltage communications equipment. Its 10 MHz gain-bandwidth product is suitable for moderate-speed analog interfaces rather than high-rate protocol equalization, while rail-to-rail operation offers flexibility in systems using a 2.5 V, 3.3 V, or 5 V rail. The two channels can support transmit and receive paths when their bandwidth requirements are similar. Keep sensitive input nodes compact, place bypass capacitors beside the supply pins, and route high-impedance nodes away from switching nodes. Validate the closed-loop response and available output drive against the actual line impedance and channel bandwidth before production release.

🖥️

Data Acquisition Front End

The MCP6022-E/SN is useful as an analog front end ahead of an ADC in compact data-acquisition systems. The dual configuration can amplify one channel and buffer another, or provide differential excitation and single-ended sensing when the circuit topology requires it. A 10 MHz gain-bandwidth product offers margin for moderately fast sensor signals, while the 1.0 mA typical operating current suits portable equipment. The amplifier cannot compensate for an out-of-range common-mode input or inadequate output range, so verify those constraints against the sensor and converter. For high-impedance sources, account for bias-current error and leakage, and use guarding or a lower-impedance sensor when necessary.

What is the MCP6022-E/SN?
The MCP6022-E/SN is a dual, rail-to-rail input and output CMOS operational amplifier from Microchip Technology. According to the manufacturer's MCP6022 product page, it provides a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, input offset voltage below 0.5 mV, and two amplifier channels in an 8-pin SOIC package. It is designed for low-voltage general-purpose signal conditioning.
What is the operating voltage of MCP6022-E/SN?
The MCP6022-E/SN operates from 2.5 V to 5.5 V as a single-supply amplifier. According to Microchip Technology's MCP6022 product information, the dual amplifier can also support dual-supply operation within the device limits. Designers should maintain the supply voltage and input common-mode voltage within the manufacturer-specified operating range for the selected temperature condition.
What is the gain-bandwidth product of MCP6022?
The MCP6022 has a gain-bandwidth product of 10 MHz per amplifier channel. This figure describes the relationship between closed-loop gain and bandwidth when operating with suitable feedback and compensation. According to the MCP6022 manufacturer product page, the device also has rail-to-rail inputs and outputs, making it suitable for low-voltage buffering, filtering, and gain stages that need moderate bandwidth.
Where can I download the MCP6022 datasheet PDF?
The official MCP6022 documentation is available from the Microchip Technology product page at https://www.microchip.com/en-us/product/MCP6022. The product page links to the manufacturer datasheet and supporting documents. For an MCP6022-E/SN schematic, use the SOIC-8 pin configuration and verify the ordering-code temperature option against the intended operating environment before releasing the PCB design.
Where can I find the MCP6022 pinout?
The MCP6022 uses an 8-pin SOIC configuration with two independent operational-amplifier channels. The MCP6022-E/SN pin arrangement is OUTA at pin 1, INA− at pin 2, INA+ at pin 3, V− at pin 4, INB+ at pin 5, INB− at pin 6, OUTB at pin 7, and V+ at pin 8. Cross-check these assignments against the manufacturer pin-description table when assigning PCB tracks.
Is MCP6022-E/SN suitable for low-voltage battery applications?
The MCP6022-E/SN is suitable for many low-voltage battery applications because it operates from 2.5 V to 5.5 V and has a typical operating current of 1.0 mA. Its rail-to-rail input and output behavior also improves signal range utilization near the supply rails. The final battery-life calculation should include both amplifier channels, external feedback current, regulator quiescent current, and the required system duty cycle.
What is the difference between MCP6022-E/SN and MCP6002-E/SN?
Both devices are dual rail-to-rail CMOS operational amplifiers offered in 8-pin SOIC packages, but the MCP6022 has a 10 MHz gain-bandwidth product while the MCP6002 is a lower-bandwidth general-purpose amplifier family. The cross-reference information identifies MCP6002-E/SN as a comparable part, although engineers should compare exact noise, offset, bias-current, supply, and stability limits before using it as a drop-in substitute.
When should I choose MCP6022-E/SN over MCP6002-E/SN?
Choose MCP6022-E/SN when signal bandwidth, slew rate, or settling performance is more important than minimum cost. The MCP6022's 10 MHz gain-bandwidth product gives it more bandwidth than the MCP6002 family and suits active filters, signal buffers, and gain stages operating at moderate frequencies. MCP6002-E/SN may be appropriate when a slower amplifier is sufficient and the two devices pass the same application-specific checks.
What can replace MCP6022-E/SN?
Potential replacements include MCP6022-I/SN, MCP6022T-E/SNVAO, MCP6022T-I/SNVAO, MCP6002-I/SN, and MCP6002-E/SN, each subject to an exact footprint and specification review. The cross-reference results identify these candidates as related or comparable devices, but replacement approval must confirm SOIC-8 pin compatibility, supply range, bandwidth, offset, noise, bias current, output swing, and temperature-grade requirements.
Is MCP6022-I/SN the same as MCP6022-E/SN?
MCP6022-I/SN and MCP6022-E/SN belong to the same MCP6022 dual-operational-amplifier family and use the 8-pin SOIC footprint. Their ordering suffixes indicate different temperature grades, so they are not interchangeable if the required ambient-temperature range differs. Confirm the suffix definitions in the manufacturer ordering information and verify the full electrical ratings before substitution.
What are the key specifications of MCP6022-E/SN that engineers should know?
The key MCP6022-E/SN specifications are 10 MHz gain-bandwidth product, 1.0 mA typical operating current, offset voltage below 0.5 mV, 8.7 nV/√Hz input noise, and 0.00053% THD+N. The device combines two rail-to-rail input/output amplifier channels in an 8-pin SOIC. According to the MCP6022 manufacturer product page, it uses advanced CMOS technology for low bias current, high open-loop gain, and high speed.
Where can I buy MCP6022-E/SN online?
The MCP6022-E/SN can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current availability, order quantities, and a quotation based on the exact suffix and packaging requirement. Engineers should specify MCP6022-E/SN in full because related MCP6022 order codes can have different temperature grades or packaging.
What is the price of MCP6022-E/SN?
Current MCP6022-E/SN pricing should be requested through the Request a Quote form on this page. A quotation should identify the exact MCP6022-E/SN ordering code, required quantity, and shipment destination. Avoid treating pricing for another MCP6022 suffix or a different package as a valid substitute for the -E/SN configuration.
What is the lead time for MCP6022-E/SN?
Request the current MCP6022-E/SN lead time through the Request a Quote form on this page. Lead time depends on the exact order quantity, procurement schedule, and market availability. Include the required delivery date and packaging details in the request so the quotation can be evaluated against the production schedule.
Is MCP6022-E/SN in stock?
Current MCP6022-E/SN stock status should be confirmed through the Request a Quote form on this page. The request should state the exact suffix, order quantity, and required shipment date. Because related MCP6022 order codes may have different grades or package markings, inventory confirmation must use MCP6022-E/SN exactly.
What is the best Microchip equivalent for MCP6022-E/SN?
MCP6022-I/SN is the closest same-family candidate identified by the cross-reference results for an MCP6022-based SOIC-8 design. It shares the MCP6022 family and 8-pin SOIC format, while the ordering suffix changes the temperature grade. Use it only when its suffix-specific temperature rating and electrical characteristics meet the original circuit requirements; otherwise retain the exact MCP6022-E/SN.

Mühendislik referans verileri: MCP6022-E/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MCP6022-E/SN for low-voltage, dual-channel analog designs that benefit from a 10 MHz gain-bandwidth product, rail-to-rail inputs and outputs, 8.7 nV/√Hz noise density, and 1.0 mA typical operating current. It is particularly suitable for portable sensing, audio gain stages, active filters, and general-purpose buffering. MCP6022-I/SN is the closest same-family candidate when its temperature-grade suffix satisfies the ambient requirements. MCP6022T-E/SNVAO and MCP6022T-I/SNVAO can be considered when their suffix-specific qualification and ratings match the application. MCP6002-I/SN and MCP6002-E/SN may fit slower, cost-oriented circuits, but the lower-bandwidth family should be checked against required gain, settling behavior, noise, offset, and stability before substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP6022-I/SN MCP6022T-E/SNVAO MCP6022T-I/SNVAO MCP6002-I/SN MCP6002-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Ordering-Code Family MCP6022-E/SN extended-temperature suffix MCP6022 family with -I/SN suffix MCP6022T family with -E/SNVAO suffix MCP6022T family with -I/SNVAO suffix MCP6002 family with -I/SN suffix MCP6002 family with -E/SN suffix

Ana Farklılayıcılar

  • Provides higher bandwidth than the MCP6002 alternatives (karşılaştırma:MCP6002-E/SN)
  • Combines two rail-to-rail amplifier channels in one SOIC-8 (karşılaştırma:MCP6022-I/SN)
  • Supports low-voltage operation with limited supply current (karşılaştırma:MCP6002-I/SN)
  • Delivers low noise for sensitive analog signal paths (karşılaştırma:MCP6022-E/SNVAO)

Tasarım Notları

Place the input, output, and feedback components close to their associated SOIC-8 pins. Keep the non-inverting input path short, avoid routing high-impedance inputs beside digital or switching traces, and connect the decoupling capacitor directly between pins 8 and 4. A short ground return from pin 4 helps keep supply noise and output-current return paths out of the sensitive input node.

Check closed-loop stability across every intended gain, including gains approaching the upper limit of the 10 MHz gain-bandwidth product. Use feedback resistors that avoid excessively high values, because parasitic input and output capacitance combined with large resistance can create peaking or oscillation. Add an isolation resistor between the amplifier output and a downstream capacitive load when the load is not directly specified by the manufacturer.

Rail-to-rail operation does not remove the need to observe input and output limits. Maintain the supply voltage within 2.5 V to 5.5 V, verify common-mode and output-swing behavior at the lowest supply voltage and highest temperature, and account for input bias-current error when driving a high-impedance sensor. Also verify that any substitute uses the same SOIC-8 pinout and equivalent noise, offset, bandwidth, and temperature limits.

For high-impedance sensor inputs, use a guarded or tightly routed signal trace and minimize leakage from board contamination and flux residue. Place low-noise input circuitry away from regulators, switching converters, and high-current return paths. The MCP6022's 1.0 mA typical operating current helps power budget, but it does not prevent external noise from coupling into a high-impedance node.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer product material identifies the MCP6022 family but does not explicitly state component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

İlgili Aramalar

mcp6022 datasheet mcp6022 pinout mcp6022 op amp mcp6022 vs mcp6002 mcp6022 price mcp6022 pdf mcp6022 equivalent MCP6022-E/SN datasheet MCP6022-E/SN pinout MCP6022-E/SN replacement MCP6022-E/SN SOIC-8 MCP6022-E/SN application circuit Microchip MCP6022-E/SN

İlgili Bileşenler ve Terimler

Microchip Technology MCP6022-E/SN MCP6022 MCP6022-I/SN MCP6022T-E/SNVAO MCP6022T-I/SNVAO MCP6022-E/SNVAO MCP6002-I/SN MCP6002-E/SN operational amplifier dual operational amplifier CMOS operational amplifier rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage input noise density THD+N signal conditioning active filter audio preamplifier portable instrumentation data acquisition SOIC-8 QFN family surface-mount package semiconductor power management
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle