MCP6549-I/P - 1.6V Quad Open-Drain Comparator | Microchip
MPN: MCP6549-I/P ✓ AktifMCP6549-I/P Genel Bakış
A comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The MCP6549 belongs to the comparator hierarchy within amplifier ICs and analog signal-processing semiconductors. Its open-drain outputs can sink logic-level current and require an external pull-up resistor, allowing the output voltage to be raised above the device supply when the application requires it.
The MCP6549 combines four independent comparator channels in one package, built-in hysteresis, and very low power consumption. Its 1.6 V minimum operating voltage supports low-energy systems, while the 5.5 V maximum operating voltage accommodates conventional low-voltage logic rails. The manufacturer identifies the outputs as 10 V capable, which supports level translation when appropriate voltage and current conditions are maintained.
Its rail-to-rail CMOS architecture allows inputs to operate near the supply rails, making the MCP6549 useful when sensing signals spans much of the available supply range. Because the outputs are open drain, multiple channels or external devices can share a pull-up node when the resulting wired-AND behavior is intentional. Input currents are extremely small, reducing disturbance on high-impedance sensor nodes.
Typical applications include battery-powered threshold detection, sensor-limit monitoring, voltage-window comparison, digital control systems, low-voltage logic interfacing, and general-purpose signal conditioning. The 14-pin PDIP format is particularly useful for prototypes, educational platforms, through-hole assemblies, and repair designs where socketed or manually soldered implementation is preferred.
When using the MCP6549, place pull-up resistors close to the open-drain output pins and choose resistor values that satisfy the required rise time without excessive switching current. Because open-drain outputs do not actively drive a high level, the pull-up voltage determines the maximum output voltage. Also verify that signal amplitudes remain within the electrical limits for temperature and supply voltage.
This product page consolidates the manufacturer's operating specifications, distributor listing details, package information, sourcing guidance, and practical comparator-selection considerations. It also highlights verified same-family packaging options while making clear that an electrically equivalent, pin-compatible 14-pin PDIP replacement requires separate manufacturer cross-reference confirmation.
Drop-in alternatifler için MCP6549-I/P — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MCP6549-I/P (aynı form faktörü ve ayağa oturma) — farklı olan Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinMCP6549-I/P Maksimum Değerlendirmeler & Elektriksel Özellikler
| Comparator Type | Quad single-ended comparator |
| Number of Channels | 4 channels |
| Supply Voltage Range | 1.6 V to 5.5 V |
| Typical Quiescent Current | 600 nA |
| Maximum Quiescent Current | 1 microamp |
| Çıkış Türü | Open drain |
| Maximum Output Voltage Capability | 10 V |
| Input Common-Mode Range | Rail-to-rail |
| Logic Compatibility | TTL compatible |
| Process Technology | CMOS |
| Hysteresis | Built-in |
| Input Bias Current | 1 pA |
| Comparator Classification | General-purpose comparator |
| Paket | 14-pin PDIP |
| Montaj Türü | Through-hole |
MCP6549-I/P 14-pin pdip Pin Yapısı Kılavuzu
MCP6549-I/P (14-pin pdip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MCP6549-I/P.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MCP6549-I/P için uygundur 6 uygulamas: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts.
Battery-Powered Threshold Detection
The MCP6549-I/P fits battery-powered threshold detection because it operates from 1.6 V to 5.5 V and has a typical quiescent current of 600 nA. Its four channels can monitor several analog inputs against reference thresholds without requiring four separate packages. Rail-to-rail input operation is valuable when a sensor signal approaches the supply rails, while built-in hysteresis reduces repeated output transitions near a switching point. For a low-power design, use low-leakage pull-up resistors and account for their continuous current in the system power budget.
Önerilen
Voltage-Window Monitoring
The MCP6549-I/P is well suited to voltage-window supervision because four channels provide flexible upper-limit, lower-limit, and fault-detection functions. Its 1.6 V minimum supply permits operation in low-voltage systems, and rail-to-rail inputs support comparisons across nearly the full available signal range. Built-in hysteresis helps maintain stable fault outputs when the monitored voltage hovers around a limit. Open-drain outputs allow status signals to share a wired-AND pull-up, reducing the number of host inputs required in a compact monitoring circuit.
Önerilen
Industrial Sensor Conditioning
The MCP6549-I/P can condition outputs from slow industrial sensors that operate near low-voltage supply rails. Its 1 pA input bias minimizes loading of high-impedance sensing nodes, while the typical 600 nA supply current helps preserve energy budget in remote or battery-backed installations. Rail-to-rail inputs allow the comparator to respond across a broad sensor range, and built-in hysteresis suppresses chatter from slowly changing or noisy process signals. The open-drain output works naturally with pull-up-based alarm inputs and wired sensor buses.
Önerilen
Portable Medical Monitoring
The MCP6549-I/P is applicable to portable monitoring modules where low supply consumption and compact signal conditioning are important. The device operates from 1.6 V to 5.5 V, draws 600 nA typically, and includes four independent channels for alarm or limit comparisons. Rail-to-rail input behavior permits sensing signals close to the available supply range, and the 1 pA input bias reduces disturbance of high-impedance sensor outputs. System designers should still validate the complete analog front end for the intended patient-safety application and applicable regulatory requirements.
Önerilen
Low-Voltage Logic Interfacing
The MCP6549-I/P can act as a low-voltage logic interface between an analog signal and digital control circuitry. Its open-drain output requires a pull-up resistor but avoids actively driving the high level, making it useful for open-drain buses and shared fault signals. The 1.6 V to 5.5 V operating range supports common low-voltage rails, and the small 600 nA typical quiescent current reduces overhead in always-on equipment. Select pull-up values carefully to balance output rise time, bus capacitance, and power consumption.
Önerilen
IoT Edge-Node Interrupts
The MCP6549-I/P is useful in IoT edge nodes that must wake a host when a sensor or supply condition crosses a threshold. Its four channels can supervise multiple slow-moving signals while consuming only 600 nA typically according to the Microchip manufacturer product page. Rail-to-rail input operation supports comparisons near the supply limits, and built-in hysteresis reduces repeated interrupt requests. The open-drain outputs can be pulled up to the host's logic rail, subject to the device's 10 V output capability and electrical operating limits.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MCP6549-I/P — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Microchip Technology |
| Package | 14-pin PDIP |
| Comparator Configuration | Quad |
| Supply Voltage Range | 1.6 V to 5.5 V |
| Typical Quiescent Current | 600 nA |
| Maximum Quiescent Current | 1 microamp |
| Output Type | Open drain |
| Output Voltage Capability | 10 V |
| Input Common-Mode Range | Rail-to-rail |
| Logic Compatibility | TTL compatible |
| Hysteresis | Built-in |
| Input Bias Current | 1 pA |
Ana Farklılayıcılar
- Four channels in one through-hole package (karşılaştırma:MCP6549-I/SL)
- Very low typical quiescent consumption (karşılaştırma:MCP6549-I/ST)
- Rail-to-rail input operation with built-in hysteresis (karşılaştırma:MCP6549-I/SL)
Tasarım Notları
Do not treat an open-drain output as a push-pull logic output. Each MCP6549-I/P output needs an external pull-up resistor, and its high-state voltage is determined by that resistor and the selected pull-up rail. Place the pull-up close to the output or receiver to limit capacitance, ringing, and slow rise times. When several outputs share one pull-up, remember that their active-low states combine as a wired-AND function.
Design the PCB footprint for the 14-pin PDIP rather than the MCP6549 family SOIC or TSSOP variants. Check row spacing, lead length, drill size, and connector clearance against the manufacturer mechanical drawing. Keep each comparator input path short and away from switching nodes because open-drain outputs do not prevent noise coupling into high-impedance analog inputs. A common ground return and locally placed input-referenced components help maintain stable comparison behavior.
Estimated: with a 5.5 V pull-up and a 100 kohm pull-up resistor, continuous current is 55 microamps whenever the output is asserted low. With a 10 kohm pull-up, the same condition produces 550 microamps. These values are design calculations based on the stated pull-up values, not manufacturer specifications. Select the largest pull-up resistance that still meets the receiver's rise-time requirement to conserve power.
Uyumluluk Bilgisi
Compliance attributes are not stated on the cited Microchip product page or distributor summaries. Confirm the current material and qualification declarations for the exact ordering variant before production release.