Microchip Technology

MCP6549-I/P - 1.6V Quad Open-Drain Comparator | Microchip

MPN: MCP6549-I/P ✓ Hoạt động
1.6 V to 5.5 V Vdss 600 nA Id 14-pin PDIP Package
MOQ: 1 |

MCP6549-I/P Tóm tắt

The Microchip Technology MCP6549-I/P is a quad, single-ended CMOS comparator operating from 1.6 V to 5.5 V, with open-drain outputs and a 14-pin PDIP package. Its headline specifications are four comparator channels, typical quiescent current of 600 nA, maximum quiescent current of 1 microamp, and output voltage capability to 10 V. The device is suited to low-power signal conditioning, threshold detection, and monitoring circuits that require rail-to-rail input operation.

A comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The MCP6549 belongs to the comparator hierarchy within amplifier ICs and analog signal-processing semiconductors. Its open-drain outputs can sink logic-level current and require an external pull-up resistor, allowing the output voltage to be raised above the device supply when the application requires it.

The MCP6549 combines four independent comparator channels in one package, built-in hysteresis, and very low power consumption. Its 1.6 V minimum operating voltage supports low-energy systems, while the 5.5 V maximum operating voltage accommodates conventional low-voltage logic rails. The manufacturer identifies the outputs as 10 V capable, which supports level translation when appropriate voltage and current conditions are maintained.

Its rail-to-rail CMOS architecture allows inputs to operate near the supply rails, making the MCP6549 useful when sensing signals spans much of the available supply range. Because the outputs are open drain, multiple channels or external devices can share a pull-up node when the resulting wired-AND behavior is intentional. Input currents are extremely small, reducing disturbance on high-impedance sensor nodes.

Typical applications include battery-powered threshold detection, sensor-limit monitoring, voltage-window comparison, digital control systems, low-voltage logic interfacing, and general-purpose signal conditioning. The 14-pin PDIP format is particularly useful for prototypes, educational platforms, through-hole assemblies, and repair designs where socketed or manually soldered implementation is preferred.

When using the MCP6549, place pull-up resistors close to the open-drain output pins and choose resistor values that satisfy the required rise time without excessive switching current. Because open-drain outputs do not actively drive a high level, the pull-up voltage determines the maximum output voltage. Also verify that signal amplitudes remain within the electrical limits for temperature and supply voltage.

This product page consolidates the manufacturer's operating specifications, distributor listing details, package information, sourcing guidance, and practical comparator-selection considerations. It also highlights verified same-family packaging options while making clear that an electrically equivalent, pin-compatible 14-pin PDIP replacement requires separate manufacturer cross-reference confirmation.

Bộ thay thế dễ dàng lắp đặt cho MCP6549-I/P — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP6549-I/P (cùng hình factor và footprint) — khác nhau ở Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.

Microchip Technology
Comparator Type: General-purpose voltage comparator
Logic Compatibility: TTL-compatible
Maximum Quiescent Current: 1 µA

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

MCP6549-I/P Tỷ lệ tối đa & tính chất điện

Comparator Type Quad single-ended comparator
Number of Channels 4 channels
Supply Voltage Range 1.6 V to 5.5 V
Typical Quiescent Current 600 nA
Maximum Quiescent Current 1 microamp
Kiểu đầu ra Open drain
Maximum Output Voltage Capability 10 V
Input Common-Mode Range Rail-to-rail
Logic Compatibility TTL compatible
Process Technology CMOS
Hysteresis Built-in
Input Bias Current 1 pA
Comparator Classification General-purpose comparator
Hộp 14-pin PDIP
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân MCP6549-I/P 14-pin pdip

Cấu hình chân cho MCP6549-I/P (14-pin pdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14-pin pdip cho MCP6549-I/P

Không có dữ liệu chân cụ thể sẵn có cho MCP6549-I/P.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP6549-I/P phù hợp cho 6 Áp dụngs: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts.

⚡

Battery-Powered Threshold Detection

The MCP6549-I/P fits battery-powered threshold detection because it operates from 1.6 V to 5.5 V and has a typical quiescent current of 600 nA. Its four channels can monitor several analog inputs against reference thresholds without requiring four separate packages. Rail-to-rail input operation is valuable when a sensor signal approaches the supply rails, while built-in hysteresis reduces repeated output transitions near a switching point. For a low-power design, use low-leakage pull-up resistors and account for their continuous current in the system power budget.

🖥️

Voltage-Window Monitoring

The MCP6549-I/P is well suited to voltage-window supervision because four channels provide flexible upper-limit, lower-limit, and fault-detection functions. Its 1.6 V minimum supply permits operation in low-voltage systems, and rail-to-rail inputs support comparisons across nearly the full available signal range. Built-in hysteresis helps maintain stable fault outputs when the monitored voltage hovers around a limit. Open-drain outputs allow status signals to share a wired-AND pull-up, reducing the number of host inputs required in a compact monitoring circuit.

🏭

Industrial Sensor Conditioning

The MCP6549-I/P can condition outputs from slow industrial sensors that operate near low-voltage supply rails. Its 1 pA input bias minimizes loading of high-impedance sensing nodes, while the typical 600 nA supply current helps preserve energy budget in remote or battery-backed installations. Rail-to-rail inputs allow the comparator to respond across a broad sensor range, and built-in hysteresis suppresses chatter from slowly changing or noisy process signals. The open-drain output works naturally with pull-up-based alarm inputs and wired sensor buses.

💊

Portable Medical Monitoring

The MCP6549-I/P is applicable to portable monitoring modules where low supply consumption and compact signal conditioning are important. The device operates from 1.6 V to 5.5 V, draws 600 nA typically, and includes four independent channels for alarm or limit comparisons. Rail-to-rail input behavior permits sensing signals close to the available supply range, and the 1 pA input bias reduces disturbance of high-impedance sensor outputs. System designers should still validate the complete analog front end for the intended patient-safety application and applicable regulatory requirements.

🔧

Low-Voltage Logic Interfacing

The MCP6549-I/P can act as a low-voltage logic interface between an analog signal and digital control circuitry. Its open-drain output requires a pull-up resistor but avoids actively driving the high level, making it useful for open-drain buses and shared fault signals. The 1.6 V to 5.5 V operating range supports common low-voltage rails, and the small 600 nA typical quiescent current reduces overhead in always-on equipment. Select pull-up values carefully to balance output rise time, bus capacitance, and power consumption.

🧩

IoT Edge-Node Interrupts

The MCP6549-I/P is useful in IoT edge nodes that must wake a host when a sensor or supply condition crosses a threshold. Its four channels can supervise multiple slow-moving signals while consuming only 600 nA typically according to the Microchip manufacturer product page. Rail-to-rail input operation supports comparisons near the supply limits, and built-in hysteresis reduces repeated interrupt requests. The open-drain outputs can be pulled up to the host's logic rail, subject to the device's 10 V output capability and electrical operating limits.

Tóm tắt các sản phẩm được đề xuất

MCP6549 Comparator family supporting the same 1.6 V to 5.5 V operating concept Được sử dụng trong: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts MCP6549-I/P Microchip Technology Được sử dụng trong: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts
What is the operating voltage of MCP6549-I/P?
The MCP6549-I/P operates from 1.6 V to 5.5 V according to the Microchip manufacturer product page. This wide low-voltage range supports both energy-efficient battery systems and conventional 3.3 V or 5 V logic rails. Because the device contains four independent comparator channels, one package can implement several sensing or threshold functions within the same supply range.
What are the key specifications of MCP6549-I/P that engineers should know?
The MCP6549-I/P is a four-channel, single-ended CMOS comparator with a 1.6 V to 5.5 V supply range, open-drain outputs, and a 14-pin PDIP package. According to the Microchip manufacturer product page, typical quiescent current is 600 nA and the maximum is 1 microamp, while the outputs are rated for 10 V capability. Built-in hysteresis and rail-to-rail input operation further support robust low-power threshold-detection designs.
How much current does the MCP6549-I/P consume?
The MCP6549-I/P consumes a typical quiescent current of 600 nA, with a maximum of 1 microamp, according to the Microchip manufacturer product page. This very low supply consumption is appropriate for battery-operated instrumentation, environmental sensors, and portable monitoring devices. Actual application consumption also depends on output switching activity and the current drawn by external pull-up resistors.
What does open-drain output mean on the MCP6549-I/P?
An open-drain output can actively pull its output low but cannot actively drive it high, so each MCP6549-I/P output requires an external pull-up resistor. According to the Microchip manufacturer product page, the outputs are 10 V capable, allowing the pull-up rail to be selected independently within the device's electrical limits. This arrangement also permits wired-AND behavior when multiple outputs share a pull-up node.
Where can I download the MCP6549-I/P datasheet PDF?
The official Microchip MCP6549 product page at https://www.microchip.com/en-us/product/MCP6549 is the correct starting point for the manufacturer datasheet and product documentation. The MCP6549-I/P is the 14-pin PDIP ordering variant. Use the datasheet's pin-description and electrical-characteristics tables when assigning pull-up resistors, checking input limits, and designing the PCB footprint.
Where can I find the MCP6549-I/P pinout?
The MCP6549-I/P pin assignment is published in the Microchip manufacturer datasheet under the 14-pin PDIP connection information. Use that pin-description table when numbering inputs, output pins, power, and ground for the PCB symbol and footprint. Do not substitute a 14-pin SOIC pinout, because MCP6549-I/SL and MCP6549-I/ST use a different physical package even though they belong to the same comparator family.
Is MCP6549-I/P suitable for battery-powered sensor monitoring?
The MCP6549-I/P is suitable for battery-powered sensor monitoring because its 1.6 V minimum supply and 600 nA typical quiescent current support low-energy operation. According to the Microchip manufacturer product page, its maximum quiescent current is 1 microamp. Rail-to-rail inputs help compare sensor signals near either supply rail, while the open-drain output keeps the power requirement low.
Can MCP6549-I/P interface with higher-voltage logic?
The MCP6549-I/P can use a pull-up rail above its own supply because its open-drain outputs are identified as 10 V capable. According to the Microchip manufacturer product page, the device is intended for operation from 1.6 V to 5.5 V. The external pull-up voltage and output current must still be checked against the datasheet's absolute-maximum and electrical-characteristics limits.
What can replace MCP6549-I/P?
The MCP6549-I/P requires a 14-pin PDIP footprint, open-drain outputs, four comparator channels, and compatible low-voltage operation for a true drop-in replacement. No verified same-package, pin-compatible alternative is identified on the product page. The MCP6549-I/SL and MCP6549-I/ST provide the same general comparator functionality in SOIC and TSSOP packages, so they require different PCB footprints and are not direct replacements.
Is there a Microchip drop-in replacement with a 14-pin PDIP package?
No verified Microchip cross-reference identifies a different 14-pin PDIP orderable part as a drop-in replacement for the MCP6549-I/P. The Microchip cross-reference search is the appropriate place to check later released equivalents, but compatibility must include the physical footprint, pin assignment, output architecture, supply range, and electrical limits. A different package code must not be treated as interchangeable without PCB changes.
What is the best cross-brand equivalent for MCP6549-I/P?
A cross-brand equivalent should not be selected solely from generic comparator specifications. It must use the same 14-pin PDIP footprint, provide four open-drain outputs, and preserve the MCP6549-I/P input, supply, and output electrical characteristics. No verified cross-brand, same-package equivalent is identified, so engineers should consult the Microchip cross-reference search and confirm the candidate against both datasheets.
When should I choose MCP6549-I/P over MCP6549-I/SL?
Choose MCP6549-I/P when the PCB uses a through-hole 14-pin PDIP footprint, while MCP6549-I/SL is appropriate for a 14-pin SOIC footprint. According to Microchip product information, both are members of the MCP6549 comparator family, but the ordering suffix determines the physical package. Use MCP6549-I/P for existing through-hole designs, prototypes, socketed assemblies, and repairs that cannot change the PCB.
MCP6549-I/P vs MCP6549-I/ST: which package should I choose?
Choose MCP6549-I/P for a 14-pin PDIP board and MCP6549-I/ST for a 14-pin TSSOP board. The MCP6549-I/ST is listed as a quad general-purpose comparator in the 14-TSSOP package. Both parts serve comparator applications, but their physical dimensions, lead spacing, and solder layouts differ, making the MCP6549-I/ST unsuitable as a no-PCB-change replacement for a DIP socket.
Is MCP6549-I/P suitable for voltage-window monitoring?
The MCP6549-I/P is suitable for voltage-window monitoring because it provides four independent comparator channels, rail-to-rail input operation, and built-in hysteresis. According to the Microchip manufacturer product page, the device operates from 1.6 V to 5.5 V and consumes 600 nA typically. Two channels can establish upper and lower limits, while additional channels can monitor another rail or provide a fault flag.
Where to buy MCP6549-I/P online and what is the lead time?
Use the Request a Quote form on this page to ask for MCP6549-I/P availability, MOQ, packaging, and current lead time. The form is the appropriate purchasing route because inventory and commercial terms can change without notice. The exact MPN is the 14-pin PDIP variant, so confirm that any quotation identifies MCP6549-I/P rather than the MCP6549-I/SL or MCP6549-I/ST package options.

Dữ liệu tham khảo kỹ thuật cho MCP6549-I/P — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MCP6549-I/P when the design requires a four-channel, low-power, open-drain comparator in a 14-pin PDIP footprint. It is a strong fit for battery-powered threshold detection, voltage-window monitoring, high-impedance sensor interfaces, and through-hole prototypes. The 1.6 V to 5.5 V operating range, 600 nA typical quiescent current, rail-to-rail inputs, and built-in hysteresis support low-voltage signal conditioning. Choose MCP6549-I/SL for a 14-pin SOIC PCB and MCP6549-I/ST for a 14-pin TSSOP PCB; these are package alternatives rather than no-PCB-change replacements. Do not select a different manufacturer solely from channel count or supply voltage. Any cross-brand substitute must match the 14-pin PDIP footprint, pin assignment, open-drain output behavior, input limits, supply range, and output ratings before it is approved as a drop-in part.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Microchip Technology
Package 14-pin PDIP
Comparator Configuration Quad
Supply Voltage Range 1.6 V to 5.5 V
Typical Quiescent Current 600 nA
Maximum Quiescent Current 1 microamp
Output Type Open drain
Output Voltage Capability 10 V
Input Common-Mode Range Rail-to-rail
Logic Compatibility TTL compatible
Hysteresis Built-in
Input Bias Current 1 pA

Bảo phân biệt quan trọng

  • Four channels in one through-hole package (vsMCP6549-I/SL)
  • Very low typical quiescent consumption (vsMCP6549-I/ST)
  • Rail-to-rail input operation with built-in hysteresis (vsMCP6549-I/SL)

Ghi chú thiết kế

Do not treat an open-drain output as a push-pull logic output. Each MCP6549-I/P output needs an external pull-up resistor, and its high-state voltage is determined by that resistor and the selected pull-up rail. Place the pull-up close to the output or receiver to limit capacitance, ringing, and slow rise times. When several outputs share one pull-up, remember that their active-low states combine as a wired-AND function.

Design the PCB footprint for the 14-pin PDIP rather than the MCP6549 family SOIC or TSSOP variants. Check row spacing, lead length, drill size, and connector clearance against the manufacturer mechanical drawing. Keep each comparator input path short and away from switching nodes because open-drain outputs do not prevent noise coupling into high-impedance analog inputs. A common ground return and locally placed input-referenced components help maintain stable comparison behavior.

Estimated: with a 5.5 V pull-up and a 100 kohm pull-up resistor, continuous current is 55 microamps whenever the output is asserted low. With a 10 kohm pull-up, the same condition produces 550 microamps. These values are design calculations based on the stated pull-up values, not manufacturer specifications. Select the largest pull-up resistance that still meets the receiver's rise-time requirement to conserve power.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes are not stated on the cited Microchip product page or distributor summaries. Confirm the current material and qualification declarations for the exact ordering variant before production release.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MCP6549-I/P datasheet MCP6549-I/P pinout MCP6549-I/P datasheet pdf MCP6549-I/P equivalent MCP6549-I/P replacement MCP6549-I/P drop-in replacement MCP6549-I/P price MCP6549-I/P stock Microchip MCP6549-I/P MCP6549 1.6V comparator MCP6549 open drain output MCP6549 PDIP pinout MCP6549 vs MCP6549-I/SL MCP6549 battery sensor application

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP6549-I/P MCP6549 MCP6549-I/SL MCP6549-I/ST quad comparator analog comparator amplifier IC semiconductor CMOS open-drain output TTL compatible rail-to-rail input built-in hysteresis quiescent current input bias current threshold detection voltage-window monitoring sensor conditioning battery-powered electronics PDIP-14 through-hole package surface mount pull-up resistor wired-AND
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ