Microchip Technology

MCP6549-I/P - 1.6V Quad Open-Drain Comparator | Microchip

MPN: MCP6549-I/P ✓ 啟用中
1.6 V to 5.5 V Vdss 600 nA Id 14-pin PDIP Package
MOQ: 1 |

MCP6549-I/P 概覽

The Microchip Technology MCP6549-I/P is a quad, single-ended CMOS comparator operating from 1.6 V to 5.5 V, with open-drain outputs and a 14-pin PDIP package. Its headline specifications are four comparator channels, typical quiescent current of 600 nA, maximum quiescent current of 1 microamp, and output voltage capability to 10 V. The device is suited to low-power signal conditioning, threshold detection, and monitoring circuits that require rail-to-rail input operation.

A comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The MCP6549 belongs to the comparator hierarchy within amplifier ICs and analog signal-processing semiconductors. Its open-drain outputs can sink logic-level current and require an external pull-up resistor, allowing the output voltage to be raised above the device supply when the application requires it.

The MCP6549 combines four independent comparator channels in one package, built-in hysteresis, and very low power consumption. Its 1.6 V minimum operating voltage supports low-energy systems, while the 5.5 V maximum operating voltage accommodates conventional low-voltage logic rails. The manufacturer identifies the outputs as 10 V capable, which supports level translation when appropriate voltage and current conditions are maintained.

Its rail-to-rail CMOS architecture allows inputs to operate near the supply rails, making the MCP6549 useful when sensing signals spans much of the available supply range. Because the outputs are open drain, multiple channels or external devices can share a pull-up node when the resulting wired-AND behavior is intentional. Input currents are extremely small, reducing disturbance on high-impedance sensor nodes.

Typical applications include battery-powered threshold detection, sensor-limit monitoring, voltage-window comparison, digital control systems, low-voltage logic interfacing, and general-purpose signal conditioning. The 14-pin PDIP format is particularly useful for prototypes, educational platforms, through-hole assemblies, and repair designs where socketed or manually soldered implementation is preferred.

When using the MCP6549, place pull-up resistors close to the open-drain output pins and choose resistor values that satisfy the required rise time without excessive switching current. Because open-drain outputs do not actively drive a high level, the pull-up voltage determines the maximum output voltage. Also verify that signal amplitudes remain within the electrical limits for temperature and supply voltage.

This product page consolidates the manufacturer's operating specifications, distributor listing details, package information, sourcing guidance, and practical comparator-selection considerations. It also highlights verified same-family packaging options while making clear that an electrically equivalent, pin-compatible 14-pin PDIP replacement requires separate manufacturer cross-reference confirmation.

直接替換替代品,適用於 MCP6549-I/P — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MCP6549-I/P (相同外形與佔位) — 差異在於 Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.

Microchip Technology
Comparator Type: General-purpose voltage comparator
Logic Compatibility: TTL-compatible
Maximum Quiescent Current: 1 µA

此產品無可直接替換的替代品。

申請替代品

MCP6549-I/P 最大額定值與電氣特性

Comparator Type Quad single-ended comparator
Number of Channels 4 channels
Supply Voltage Range 1.6 V to 5.5 V
Typical Quiescent Current 600 nA
Maximum Quiescent Current 1 microamp
輸出類型 Open drain
Maximum Output Voltage Capability 10 V
Input Common-Mode Range Rail-to-rail
Logic Compatibility TTL compatible
Process Technology CMOS
Hysteresis Built-in
Input Bias Current 1 pA
Comparator Classification General-purpose comparator
封裝 14-pin PDIP
安裝類型 Through-hole

MCP6549-I/P 14-pin pdip 腳位配置指南

MCP6549-I/P(14-pin pdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MCP6549-I/P 的 14-pin pdip 封裝腳位圖

無詳細腳位定義資料: MCP6549-I/P.

請參閱 資料表 以查看完整腳位配置。

典型應用

MCP6549-I/P 適用於 6 應用s: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts.

⚡

Battery-Powered Threshold Detection

The MCP6549-I/P fits battery-powered threshold detection because it operates from 1.6 V to 5.5 V and has a typical quiescent current of 600 nA. Its four channels can monitor several analog inputs against reference thresholds without requiring four separate packages. Rail-to-rail input operation is valuable when a sensor signal approaches the supply rails, while built-in hysteresis reduces repeated output transitions near a switching point. For a low-power design, use low-leakage pull-up resistors and account for their continuous current in the system power budget.

🖥️

Voltage-Window Monitoring

The MCP6549-I/P is well suited to voltage-window supervision because four channels provide flexible upper-limit, lower-limit, and fault-detection functions. Its 1.6 V minimum supply permits operation in low-voltage systems, and rail-to-rail inputs support comparisons across nearly the full available signal range. Built-in hysteresis helps maintain stable fault outputs when the monitored voltage hovers around a limit. Open-drain outputs allow status signals to share a wired-AND pull-up, reducing the number of host inputs required in a compact monitoring circuit.

🏭

Industrial Sensor Conditioning

The MCP6549-I/P can condition outputs from slow industrial sensors that operate near low-voltage supply rails. Its 1 pA input bias minimizes loading of high-impedance sensing nodes, while the typical 600 nA supply current helps preserve energy budget in remote or battery-backed installations. Rail-to-rail inputs allow the comparator to respond across a broad sensor range, and built-in hysteresis suppresses chatter from slowly changing or noisy process signals. The open-drain output works naturally with pull-up-based alarm inputs and wired sensor buses.

💊

Portable Medical Monitoring

The MCP6549-I/P is applicable to portable monitoring modules where low supply consumption and compact signal conditioning are important. The device operates from 1.6 V to 5.5 V, draws 600 nA typically, and includes four independent channels for alarm or limit comparisons. Rail-to-rail input behavior permits sensing signals close to the available supply range, and the 1 pA input bias reduces disturbance of high-impedance sensor outputs. System designers should still validate the complete analog front end for the intended patient-safety application and applicable regulatory requirements.

🔧

Low-Voltage Logic Interfacing

The MCP6549-I/P can act as a low-voltage logic interface between an analog signal and digital control circuitry. Its open-drain output requires a pull-up resistor but avoids actively driving the high level, making it useful for open-drain buses and shared fault signals. The 1.6 V to 5.5 V operating range supports common low-voltage rails, and the small 600 nA typical quiescent current reduces overhead in always-on equipment. Select pull-up values carefully to balance output rise time, bus capacitance, and power consumption.

🧩

IoT Edge-Node Interrupts

The MCP6549-I/P is useful in IoT edge nodes that must wake a host when a sensor or supply condition crosses a threshold. Its four channels can supervise multiple slow-moving signals while consuming only 600 nA typically according to the Microchip manufacturer product page. Rail-to-rail input operation supports comparisons near the supply limits, and built-in hysteresis reduces repeated interrupt requests. The open-drain outputs can be pulled up to the host's logic rail, subject to the device's 10 V output capability and electrical operating limits.

推薦產品摘要

MCP6549 Comparator family supporting the same 1.6 V to 5.5 V operating concept 用於: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts MCP6549-I/P Microchip Technology 用於: Battery-Powered Threshold Detection, Voltage-Window Monitoring, Industrial Sensor Conditioning, Portable Medical Monitoring, Low-Voltage Logic Interfacing, IoT Edge-Node Interrupts
What is the operating voltage of MCP6549-I/P?
The MCP6549-I/P operates from 1.6 V to 5.5 V according to the Microchip manufacturer product page. This wide low-voltage range supports both energy-efficient battery systems and conventional 3.3 V or 5 V logic rails. Because the device contains four independent comparator channels, one package can implement several sensing or threshold functions within the same supply range.
What are the key specifications of MCP6549-I/P that engineers should know?
The MCP6549-I/P is a four-channel, single-ended CMOS comparator with a 1.6 V to 5.5 V supply range, open-drain outputs, and a 14-pin PDIP package. According to the Microchip manufacturer product page, typical quiescent current is 600 nA and the maximum is 1 microamp, while the outputs are rated for 10 V capability. Built-in hysteresis and rail-to-rail input operation further support robust low-power threshold-detection designs.
How much current does the MCP6549-I/P consume?
The MCP6549-I/P consumes a typical quiescent current of 600 nA, with a maximum of 1 microamp, according to the Microchip manufacturer product page. This very low supply consumption is appropriate for battery-operated instrumentation, environmental sensors, and portable monitoring devices. Actual application consumption also depends on output switching activity and the current drawn by external pull-up resistors.
What does open-drain output mean on the MCP6549-I/P?
An open-drain output can actively pull its output low but cannot actively drive it high, so each MCP6549-I/P output requires an external pull-up resistor. According to the Microchip manufacturer product page, the outputs are 10 V capable, allowing the pull-up rail to be selected independently within the device's electrical limits. This arrangement also permits wired-AND behavior when multiple outputs share a pull-up node.
Where can I download the MCP6549-I/P datasheet PDF?
The official Microchip MCP6549 product page at https://www.microchip.com/en-us/product/MCP6549 is the correct starting point for the manufacturer datasheet and product documentation. The MCP6549-I/P is the 14-pin PDIP ordering variant. Use the datasheet's pin-description and electrical-characteristics tables when assigning pull-up resistors, checking input limits, and designing the PCB footprint.
Where can I find the MCP6549-I/P pinout?
The MCP6549-I/P pin assignment is published in the Microchip manufacturer datasheet under the 14-pin PDIP connection information. Use that pin-description table when numbering inputs, output pins, power, and ground for the PCB symbol and footprint. Do not substitute a 14-pin SOIC pinout, because MCP6549-I/SL and MCP6549-I/ST use a different physical package even though they belong to the same comparator family.
Is MCP6549-I/P suitable for battery-powered sensor monitoring?
The MCP6549-I/P is suitable for battery-powered sensor monitoring because its 1.6 V minimum supply and 600 nA typical quiescent current support low-energy operation. According to the Microchip manufacturer product page, its maximum quiescent current is 1 microamp. Rail-to-rail inputs help compare sensor signals near either supply rail, while the open-drain output keeps the power requirement low.
Can MCP6549-I/P interface with higher-voltage logic?
The MCP6549-I/P can use a pull-up rail above its own supply because its open-drain outputs are identified as 10 V capable. According to the Microchip manufacturer product page, the device is intended for operation from 1.6 V to 5.5 V. The external pull-up voltage and output current must still be checked against the datasheet's absolute-maximum and electrical-characteristics limits.
What can replace MCP6549-I/P?
The MCP6549-I/P requires a 14-pin PDIP footprint, open-drain outputs, four comparator channels, and compatible low-voltage operation for a true drop-in replacement. No verified same-package, pin-compatible alternative is identified on the product page. The MCP6549-I/SL and MCP6549-I/ST provide the same general comparator functionality in SOIC and TSSOP packages, so they require different PCB footprints and are not direct replacements.
Is there a Microchip drop-in replacement with a 14-pin PDIP package?
No verified Microchip cross-reference identifies a different 14-pin PDIP orderable part as a drop-in replacement for the MCP6549-I/P. The Microchip cross-reference search is the appropriate place to check later released equivalents, but compatibility must include the physical footprint, pin assignment, output architecture, supply range, and electrical limits. A different package code must not be treated as interchangeable without PCB changes.
What is the best cross-brand equivalent for MCP6549-I/P?
A cross-brand equivalent should not be selected solely from generic comparator specifications. It must use the same 14-pin PDIP footprint, provide four open-drain outputs, and preserve the MCP6549-I/P input, supply, and output electrical characteristics. No verified cross-brand, same-package equivalent is identified, so engineers should consult the Microchip cross-reference search and confirm the candidate against both datasheets.
When should I choose MCP6549-I/P over MCP6549-I/SL?
Choose MCP6549-I/P when the PCB uses a through-hole 14-pin PDIP footprint, while MCP6549-I/SL is appropriate for a 14-pin SOIC footprint. According to Microchip product information, both are members of the MCP6549 comparator family, but the ordering suffix determines the physical package. Use MCP6549-I/P for existing through-hole designs, prototypes, socketed assemblies, and repairs that cannot change the PCB.
MCP6549-I/P vs MCP6549-I/ST: which package should I choose?
Choose MCP6549-I/P for a 14-pin PDIP board and MCP6549-I/ST for a 14-pin TSSOP board. The MCP6549-I/ST is listed as a quad general-purpose comparator in the 14-TSSOP package. Both parts serve comparator applications, but their physical dimensions, lead spacing, and solder layouts differ, making the MCP6549-I/ST unsuitable as a no-PCB-change replacement for a DIP socket.
Is MCP6549-I/P suitable for voltage-window monitoring?
The MCP6549-I/P is suitable for voltage-window monitoring because it provides four independent comparator channels, rail-to-rail input operation, and built-in hysteresis. According to the Microchip manufacturer product page, the device operates from 1.6 V to 5.5 V and consumes 600 nA typically. Two channels can establish upper and lower limits, while additional channels can monitor another rail or provide a fault flag.
Where to buy MCP6549-I/P online and what is the lead time?
Use the Request a Quote form on this page to ask for MCP6549-I/P availability, MOQ, packaging, and current lead time. The form is the appropriate purchasing route because inventory and commercial terms can change without notice. The exact MPN is the 14-pin PDIP variant, so confirm that any quotation identifies MCP6549-I/P rather than the MCP6549-I/SL or MCP6549-I/ST package options.

工程參考資料,適用於 MCP6549-I/P — 比較、設計指引及合規資訊。

選型指南

Choose MCP6549-I/P when the design requires a four-channel, low-power, open-drain comparator in a 14-pin PDIP footprint. It is a strong fit for battery-powered threshold detection, voltage-window monitoring, high-impedance sensor interfaces, and through-hole prototypes. The 1.6 V to 5.5 V operating range, 600 nA typical quiescent current, rail-to-rail inputs, and built-in hysteresis support low-voltage signal conditioning. Choose MCP6549-I/SL for a 14-pin SOIC PCB and MCP6549-I/ST for a 14-pin TSSOP PCB; these are package alternatives rather than no-PCB-change replacements. Do not select a different manufacturer solely from channel count or supply voltage. Any cross-brand substitute must match the 14-pin PDIP footprint, pin assignment, open-drain output behavior, input limits, supply range, and output ratings before it is approved as a drop-in part.

與替代品比較

參數 本產品
Brand Microchip Technology
Package 14-pin PDIP
Comparator Configuration Quad
Supply Voltage Range 1.6 V to 5.5 V
Typical Quiescent Current 600 nA
Maximum Quiescent Current 1 microamp
Output Type Open drain
Output Voltage Capability 10 V
Input Common-Mode Range Rail-to-rail
Logic Compatibility TTL compatible
Hysteresis Built-in
Input Bias Current 1 pA

主要差異化特點

  • Four channels in one through-hole package (對比MCP6549-I/SL)
  • Very low typical quiescent consumption (對比MCP6549-I/ST)
  • Rail-to-rail input operation with built-in hysteresis (對比MCP6549-I/SL)

設計說明

Do not treat an open-drain output as a push-pull logic output. Each MCP6549-I/P output needs an external pull-up resistor, and its high-state voltage is determined by that resistor and the selected pull-up rail. Place the pull-up close to the output or receiver to limit capacitance, ringing, and slow rise times. When several outputs share one pull-up, remember that their active-low states combine as a wired-AND function.

Design the PCB footprint for the 14-pin PDIP rather than the MCP6549 family SOIC or TSSOP variants. Check row spacing, lead length, drill size, and connector clearance against the manufacturer mechanical drawing. Keep each comparator input path short and away from switching nodes because open-drain outputs do not prevent noise coupling into high-impedance analog inputs. A common ground return and locally placed input-referenced components help maintain stable comparison behavior.

Estimated: with a 5.5 V pull-up and a 100 kohm pull-up resistor, continuous current is 55 microamps whenever the output is asserted low. With a 10 kohm pull-up, the same condition produces 550 microamps. These values are design calculations based on the stated pull-up values, not manufacturer specifications. Select the largest pull-up resistance that still meets the receiver's rise-time requirement to conserve power.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance attributes are not stated on the cited Microchip product page or distributor summaries. Confirm the current material and qualification declarations for the exact ordering variant before production release.

相關搜尋

MCP6549-I/P datasheet MCP6549-I/P pinout MCP6549-I/P datasheet pdf MCP6549-I/P equivalent MCP6549-I/P replacement MCP6549-I/P drop-in replacement MCP6549-I/P price MCP6549-I/P stock Microchip MCP6549-I/P MCP6549 1.6V comparator MCP6549 open drain output MCP6549 PDIP pinout MCP6549 vs MCP6549-I/SL MCP6549 battery sensor application

相關元件與詞彙

Microchip Technology MCP6549-I/P MCP6549 MCP6549-I/SL MCP6549-I/ST quad comparator analog comparator amplifier IC semiconductor CMOS open-drain output TTL compatible rail-to-rail input built-in hysteresis quiescent current input bias current threshold detection voltage-window monitoring sensor conditioning battery-powered electronics PDIP-14 through-hole package surface mount pull-up resistor wired-AND
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情