NXP Semiconductors

MKL36Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP

MPN: MKL36Z64VLH4 ✓ Aktif
64-LQFP (10 mm x 10 mm) Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKL36Z64VLH4 Genel Bakış

The NXP Semiconductors MKL36Z64VLH4 is a low-power Kinetis L series microcontroller featuring a 48 MHz Arm Cortex-M0+ core, 64 KB of flash memory, 8 KB of SRAM, and USB 2.0 connectivity in a 64-LQFP package. It combines a compact general-purpose MCU with low-power operation and a rich set of analog, communication, timing, and control peripherals for portable embedded systems.

A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals on one device. The Cortex-M0+ core used by the MKL36Z64VLH4 is a compact 32-bit Arm architecture intended for cost-sensitive control applications that require deterministic real-time behavior, efficient interrupt handling, and low power consumption. Within the product hierarchy, this device is a 32-bit microcontroller with 64 KB flash, USB 2.0 connectivity, and a low-power Kinetis L series architecture.

The 64 KB flash provides embedded code storage for control firmware, while 8 KB of SRAM supports stack, data, and real-time working memory. A 48 MHz operating frequency gives the processor additional performance headroom for protocol handling and control-loop computation without requiring a higher-power processor architecture. USB 2.0 connectivity supports portable data-collection, configuration, logging, and host-device applications where a wired interface is more appropriate than a wireless link.

The Kinetis L series is designed around low-power operation for portable and metrology-oriented products. Its peripheral set supports analog measurement, communications, timing, and control functions in a single device, reducing component count in compact systems. The 64-LQFP package provides a conventional leaded footprint with good board inspection and assembly characteristics, while its 10 mm by 10 mm body allows a compact PCB implementation.

Typical uses include portable meters, data loggers, industrial monitoring equipment, battery-powered instruments, USB-connected control panels, and embedded sensing systems. The device is particularly suitable when a design needs USB connectivity, low-power operation, and a 32-bit control architecture without the memory and processing overhead of a higher-end Cortex-M processor.

For PCB design, follow the manufacturer pin-assignment and recommended-land-pattern tables in the MKL36Z64VLH4 datasheet and reference manual. Verify USB routing, supply decoupling, clock configuration, and programming-header access before layout release. This page combines the manufacturer product information with distributor technical records, application guidance, and engineering-focused design notes for faster component selection.

Drop-in alternatifler için MKL36Z64VLH4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MKL36Z64VLH4 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Product Type, Series.

NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Package: 100-LQFP, 14 x 14 mm
Product Type: 32-bit low-power microcontroller (MCU)
İle Karşılaştır MKL36Z64VLH4 →

MKL36Z64VLK4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10x10 mm)
Same Kinetis KL36 memory and core configuration in the same 64-LQFP footprint; the principal distinction is the ordering-code temperature grade, which must be confirmed against the manufacturer table.

📋 Katalogda Olmayan Referans Alternatifi

MKL36Z128VLH4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10x10 mm)
Same 48 MHz Cortex-M0+ architecture and 64-LQFP footprint, with 128 KB flash instead of 64 KB, a 64 KB memory increase, while retaining the 8 KB SRAM configuration.

📋 Katalogda Olmayan Referans Alternatifi

MKL36Z128VLK4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10x10 mm)
Same 64-LQFP Kinetis KL36 footprint with 128 KB flash instead of 64 KB and a different temperature-grade ordering code; confirm grade and USB configuration before substitution.

📋 Katalogda Olmayan Referans Alternatifi

MKL36Z32VLH4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10x10 mm)
Same 48 MHz Cortex-M0+ core and 64-LQFP footprint, but flash is reduced from 64 KB to 32 KB, a 50% memory reduction that can constrain firmware size.

📋 Katalogda Olmayan Referans Alternatifi

MKL36Z64VLH4 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ARM Cortex-M0+ microcontroller
Series Kinetis L series
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
SRAM 8 KB
Architecture ARM Cortex-M0+
USB Version USB 2.0
Paket 64-LQFP (10 mm x 10 mm)
Montaj Türü Surface mount
İşletim Sıcaklığı -40 C to +105 C
Program Memory Type Flash
Memory Organization 64K x 8
CPU Bit Width 32 bit
Core ARM Cortex-M0+
Peripheral Highlights Segment LCD, analog, communication, timing, and control peripherals

MKL36Z64VLH4 64-lqfp (10 mm x 10 mm) Pin Yapısı Kılavuzu

MKL36Z64VLH4 (64-lqfp (10 mm x 10 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-lqfp (10 mm x 10 mm) paket pin çizelgesi için MKL36Z64VLH4

Ayrıntılı pin çıkış verisi mevcut değil: MKL36Z64VLH4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MKL36Z64VLH4 için uygundur 6 uygulamas: Portable Data Logger, Battery-Powered Metering Instrument, USB-Connected Control Panel, Industrial Sensor Interface, Segment LCD Measurement Instrument, Battery-Powered Environmental Monitor.

📱

Portable Data Logger

The MKL36Z64VLH4 fits a portable USB data logger because its 48 MHz Cortex-M0+ core provides control-loop headroom while 8 KB of SRAM supports buffering and protocol state. USB 2.0 creates a practical path for configuration, data transfer, and firmware updates without requiring a separate communications processor. The 64 KB flash supports event handling, configuration storage, and logging firmware. Keep USB traces short, route them as a controlled-impedance differential pair, and validate sustained write throughput against flash endurance before defining the logging rate.

🔋

Battery-Powered Metering Instrument

The MKL36Z64VLH4 suits battery-powered metering equipment because the Kinetis L series is optimized for low-power operation and includes analog, timing, and control peripherals. The 48 MHz Cortex-M0+ core handles sampling coordination and local calculations, while segment LCD support aligns with compact meter displays. The 8 KB SRAM is adequate for short working buffers rather than large histories. Select the low-power mode, oscillator arrangement, and analog reference according to the manufacturer guidance to maximize time between battery replacements.

🖥️

USB-Connected Control Panel

A USB-connected control panel benefits from the MKL36Z64VLH4's combination of a 48 MHz Cortex-M0+ core, USB 2.0, and compact 64-LQFP packaging. The processor can supervise buttons, indicators, sensors, and local setpoint logic while USB handles host connectivity and configuration. The package's leaded pitch supports assembly processes that avoid very fine-pitch handling. Allocate USB interface protection carefully so component placement does not disturb the differential trace geometry or its ground reference.

🏭

Industrial Sensor Interface

The MKL36Z64VLH4 can serve as the central controller for a compact industrial sensor interface when the design values low power, local processing, and USB service access. Its analog and communication peripherals allow sensing, conditioning, and digital interface functions to be consolidated in one device. The 48 MHz core provides deterministic scheduling without the overhead of a higher-tier processor. Confirm analog input ranges, reference accuracy, and peripheral pin multiplexing in the datasheet before assigning external sensor channels.

📺

Segment LCD Measurement Instrument

The MKL36Z64VLH4 is well aligned with segment LCD instruments because NXP identifies segment LCD support as a defining feature of the Kinetis L series. The device can drive display logic while the 48 MHz core manages measurements, keypad input, and low-power display behavior. Its 64 KB flash accommodates firmware for calibration and multiple measurement modes. Verify the exact segment and common-drive requirements in the manufacturer pin table and select external display drivers only if the internal resources are insufficient.

🧩

Battery-Powered Environmental Monitor

The MKL36Z64VLH4 supports compact environmental monitors that periodically sample sensors, store readings, and communicate through USB. Its low-power Kinetis L architecture lets the design remain idle between measurements, while the 48 MHz core provides sufficient response time for sensor conditioning and event processing. The 8 KB SRAM accommodates bounded sample buffers, and 64 KB flash provides room for calibration tables and event logic. Define a duty cycle and data-retention policy that fit both SRAM capacity and flash endurance.

What is the MKL36Z64VLH4 microcontroller?
The MKL36Z64VLH4 is a 32-bit NXP Kinetis L series microcontroller built around a 48 MHz Arm Cortex-M0+ core. It provides 64 KB of flash memory, 8 KB of SRAM, USB 2.0 connectivity, and a 64-LQFP package. According to the NXP product page, the device is intended for low-power portable embedded applications that combine control processing, analog peripherals, communications, and USB connectivity.
What are the key specifications of MKL36Z64VLH4 that engineers should know?
The MKL36Z64VLH4 combines a 48 MHz Arm Cortex-M0+ core with 64 KB of flash, 8 KB of SRAM, USB 2.0, and a 64-LQFP package measuring 10 mm by 10 mm. NXP identifies it as a low-power Kinetis L series MCU for portable embedded applications. Its 32-bit architecture, segment LCD support, and integrated analog, communication, timing, and control peripherals make it suitable for compact metering, monitoring, and control products.
What is the operating temperature range of MKL36Z64VLH4?
The MKL36Z64VLH4 is specified for operation from -40 C to +105 C. This industrial temperature span allows the microcontroller to be used in environments with extended temperature requirements rather than only in ambient indoor products. For a complete electrical design, confirm the power rails, oscillator limits, and peripheral operating conditions in the manufacturer datasheet.
How much flash and SRAM does the MKL36Z64VLH4 have?
The MKL36Z64VLH4 contains 64 KB of flash memory and 8 KB of SRAM. According to the NXP product page and distributor technical records, the flash is organized as 64K x 8 and stores the control firmware, while the SRAM handles the stack, working variables, and real-time data. Consider the application code size and peak RAM requirement before committing to this memory configuration.
What is the maximum operating frequency of MKL36Z64VLH4?
The MKL36Z64VLH4 runs at a maximum CPU frequency of 48 MHz. The Arm Cortex-M0+ core provides deterministic interrupt-driven execution for embedded control and communication tasks. Use the manufacturer clock-tree and power-mode guidance when selecting the internal oscillator, external crystal, and bus clock configuration for the final design.
Which USB version does MKL36Z64VLH4 support?
The MKL36Z64VLH4 supports USB 2.0. This interface allows a portable embedded product to exchange data with a host over USB and can simplify configuration, logging, or firmware-update workflows. USB routing requires controlled impedance, short traces, correct return paths, and ESD protection; use the manufacturer USB application guidance when planning the layout.
What package does the MKL36Z64VLH4 use?
The MKL36Z64VLH4 is supplied in a 64-LQFP package with a 10 mm by 10 mm body. The leaded surface-mount package supports conventional assembly and visual inspection while remaining compact enough for portable embedded products. Use the package drawing, pin-assignment table, and recommended PCB footprint in the manufacturer documentation rather than relying on a generic LQFP drawing.
Where can I download the MKL36Z64VLH4 datasheet and pinout?
The official MKL36Z64VLH4 documentation is available through the NXP product page and the Kinetis KL3 reference documentation. The manufacturer datasheet contains electrical characteristics, memory maps, and peripheral descriptions, while the reference manual provides register-level details. Use the pin-description and package-outline tables when assigning PCB nets and verifying the 64-pin LQFP land pattern.
Can MKL36Z64VLH4 be used in battery-powered equipment?
Yes, the MKL36Z64VLH4 is appropriate for battery-powered equipment because NXP positions it as a low-power Kinetis L series MCU. Its low-power architecture can reduce energy use during idle periods and between control events. Actual battery life depends on the selected sleep mode, clock configuration, sensor load, and duty cycle, so evaluate those settings with the manufacturer power-measurement procedures.
Is MKL36Z64VLH4 suitable for industrial metering applications?
The MKL36Z64VLH4 fits industrial metering designs that need a 48 MHz control core, segment LCD support, analog measurement capability, and low-power operation. NXP describes the Kinetis L family as combining low-power performance with analog, communication, timing, and control peripherals for metering applications. Validate sensor accuracy, reference accuracy, and isolation requirements separately from the MCU specification.
What is the best drop-in replacement for MKL36Z64VLH4?
The closest drop-in choices are same-family NXP Kinetis KL36 devices with the same 64-LQFP footprint and matching pin assignments, such as MKL36Z64VLK4 or the higher-memory MKL36Z128VLH4. A valid replacement must match the temperature grade, flash and SRAM requirements, USB configuration, and all peripheral pins. Firmware compatibility also depends on the device-specific pin and clock configuration.
What NXP equivalent can replace MKL36Z64VLH4?
The most practical NXP equivalent is another 64-pin Kinetis KL36 device with matching package, pinout, and memory requirements. MKL36Z64VLK4 offers the same 64 KB flash and 8 KB SRAM configuration in the same 64-LQFP footprint, while MKL36Z128VLH4 adds flash memory without changing the package. Verify the active status, temperature grade, and USB device configuration before treating either part as a substitution.
When should I choose MKL36Z64VLH4 over another Kinetis KL36 device?
Choose the MKL36Z64VLH4 when a design requires exactly 64 KB of flash, 8 KB of SRAM, USB 2.0, and a 64-LQFP footprint in an extended-temperature design. Select a higher-flash alternative only when firmware growth requires it, or a different package when connector and assembly constraints dominate. Keeping memory and pin requirements stable simplifies schematic reuse and firmware validation.
Is MKL36Z64VLH4 suitable for a USB-connected portable logger?
Yes, the MKL36Z64VLH4 is well matched to a USB-connected portable logger because it combines USB 2.0 with a low-power 48 MHz Cortex-M0+ core and 8 KB of SRAM. Its 64 KB of flash can hold logging firmware and configuration logic, while the LCD and analog peripherals support local readout and sensor conditioning. Buffering strategy and sustained write throughput must be designed around the available memory and flash endurance.
How do I buy MKL36Z64VLH4 online and check current stock?
Use the Request a Quote form on this page to request the current MKL36Z64VLH4 unit price, stock position, minimum order quantity, and lead time. A distributor listing identifies the part as a 64-LQFP, 48 MHz, 64 KB-flash ARM Cortex-M0+ microcontroller, but availability changes by region and order volume. Submit the requested package suffix and target quantity so the quote can be matched accurately.
What is the price of MKL36Z64VLH4?
The current commercial price of the MKL36Z64VLH4 is generated from structured supply data and may change with quantity, market conditions, and sourcing channel. Use the Request a Quote form on this page for a current quote for the exact 64-LQFP ordering code. The form also captures the required quantity and delivery location, which are essential for evaluating realistic availability and lead time.
What is the lead time for MKL36Z64VLH4?
The current lead time for MKL36Z64VLH4 should be confirmed through the Request a Quote form on this page because stock and production schedules vary by quantity and delivery location. Distributor records indicate that the exact MPN is offered for immediate shipment in some quantities, but that does not guarantee allocation for production quantities. Provide the annual usage forecast and requested delivery schedule when requesting a quotation.
What design checks matter most for an MKL36Z64VLH4 PCB?
The most important PCB checks are correct power and ground distribution, local decoupling, clock routing, programming access, and USB signal integrity. Place bulk and bypass capacitors close to their associated supply pins, route USB differential pairs as a controlled-impedance pair, and provide a clean return path. Review the package pin table and manufacturer recommended layout to avoid conflicts around analog and communication functions.

Mühendislik referans verileri: MKL36Z64VLH4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MKL36Z64VLH4 when a compact control product needs a 48 MHz Arm Cortex-M0+ core, USB 2.0, 64 KB of flash, and 8 KB of SRAM in a 64-LQFP package. Its low-power Kinetis L architecture is appropriate for portable meters, environmental monitors, USB loggers, and compact industrial sensing equipment. Select MKL36Z128VLH4 when firmware growth requires 128 KB of flash while preserving the same package and core architecture. Choose MKL36Z32VLH4 only when 32 KB of flash is sufficient, since it halves the program memory of the target. Use MKL36Z64VLK4 when its manufacturer-defined temperature grade meets the product specification. No cross-brand MCU was confirmed as a true pin-to-pin drop-in replacement, so any cross-brand redesign should be treated as a board-level migration rather than a simple component substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MKL36Z64VLK4 MKL36Z128VLH4 MKL36Z128VLK4 MKL36Z32VLH4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 128 KB 128 KB 32 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB
USB Connectivity USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0
Temperature Grade -40 C to +105 C Confirm from manufacturer ordering table -40 C to +105 C Confirm from manufacturer ordering table -40 C to +105 C
Program Memory Organization 64K x 8 64K x 8 128K x 8 128K x 8 32K x 8

Ana Farklılayıcılar

  • USB connectivity is integrated into a compact 64 KB Kinetis L series MCU (karşılaştırma:MKL36Z32VLH4)
  • Memory-balanced configuration for firmware-intensive control designs (karşılaştırma:MKL36Z128VLH4)
  • Extended-temperature capability for industrial and portable equipment (karşılaştırma:MKL36Z64VLK4)

Tasarım Notları

Build the layout from the manufacturer package drawing and recommended footprint rather than a generic 64-LQFP template. Confirm pin 1 orientation, exposed thermal requirements if any, and the pad dimensions for the selected assembly process. Place decoupling capacitance directly at the corresponding supply pins, provide a low-impedance ground plane, and keep analog inputs away from fast switching and USB return currents.

Treat the USB interface as a controlled-impedance differential pair. Route both conductors together with a continuous ground reference, minimize stubs and test-point discontinuities, and place USB protection components close to the connector. Follow the NXP USB hardware-design guidance for trace geometry and power-path arrangement; signal integrity problems at USB 2.0 can appear as intermittent enumeration or data errors rather than obvious assembly faults.

Estimate the average and peak supply current before fixing the regulator and bulk-capacitor selection. Include MCU activity, analog peripherals, external interface loads, and USB attachment in the load cases. Decouple each supply rail at the pins with the capacitance and ESR range specified by the manufacturer, and verify startup current when the USB bus supplies or attaches to the board.

Do not treat the flash-memory size as interchangeable with firmware capability: the 64 KB program memory must accommodate the bootloader, application, configuration data, and any update buffer. The 8 KB SRAM also constrains logging, graphics, and protocol buffering. Check the memory map and pin-muxing options in the manufacturer documentation, and reserve programming and debug access before placing the final footprint.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The retrieved manufacturer and distributor records identify the product as an industrial-temperature Kinetis KL36 microcontroller but do not explicitly state the requested compliance statuses.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MKL36Z64VLH4 datasheet MKL36Z64VLH4 pinout MKL36Z64VLH4 datasheet pdf MKL36Z64VLH4 64-LQFP footprint MKL36Z64VLH4 48MHz Cortex-M0+ MKL36Z64VLH4 reference manual MKL36Z64VLH4 USB 2.0 MKL36Z64VLH4 drop-in replacement MKL36Z64VLH4 vs MKL36Z128VLH4 NXP MKL36Z64VLH4 MKL36Z64VLH4 low power metering MKL36Z64VLH4 price and stock MKL36Z64VLH4 equivalent MCU

İlgili Bileşenler ve Terimler

NXP Semiconductors MKL36Z64VLH4 MKL36Z64VLK4 MKL36Z128VLH4 MKL36Z128VLK4 MKL36Z32VLH4 Kinetis L series Kinetis KL36 Arm Cortex-M0+ 32-bit microcontroller embedded microcontroller low-power MCU USB 2.0 64 KB flash 8 KB SRAM 48 MHz clock 64-LQFP surface mount segment LCD portable embedded applications industrial metering USB data logger battery-powered instrument analog peripheral low-power mode
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle