MKL36Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP
부품 번호: MKL36Z64VLH4 ✓ 활성MKL36Z64VLH4 개요
A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals on one device. The Cortex-M0+ core used by the MKL36Z64VLH4 is a compact 32-bit Arm architecture intended for cost-sensitive control applications that require deterministic real-time behavior, efficient interrupt handling, and low power consumption. Within the product hierarchy, this device is a 32-bit microcontroller with 64 KB flash, USB 2.0 connectivity, and a low-power Kinetis L series architecture.
The 64 KB flash provides embedded code storage for control firmware, while 8 KB of SRAM supports stack, data, and real-time working memory. A 48 MHz operating frequency gives the processor additional performance headroom for protocol handling and control-loop computation without requiring a higher-power processor architecture. USB 2.0 connectivity supports portable data-collection, configuration, logging, and host-device applications where a wired interface is more appropriate than a wireless link.
The Kinetis L series is designed around low-power operation for portable and metrology-oriented products. Its peripheral set supports analog measurement, communications, timing, and control functions in a single device, reducing component count in compact systems. The 64-LQFP package provides a conventional leaded footprint with good board inspection and assembly characteristics, while its 10 mm by 10 mm body allows a compact PCB implementation.
Typical uses include portable meters, data loggers, industrial monitoring equipment, battery-powered instruments, USB-connected control panels, and embedded sensing systems. The device is particularly suitable when a design needs USB connectivity, low-power operation, and a 32-bit control architecture without the memory and processing overhead of a higher-end Cortex-M processor.
For PCB design, follow the manufacturer pin-assignment and recommended-land-pattern tables in the MKL36Z64VLH4 datasheet and reference manual. Verify USB routing, supply decoupling, clock configuration, and programming-header access before layout release. This page combines the manufacturer product information with distributor technical records, application guidance, and engineering-focused design notes for faster component selection.
드롭인 대체품: MKL36Z64VLH4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MKL36Z64VLH4 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Product Type, Series.
MKL36Z64VLK4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL36Z128VLH4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL36Z128VLK4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL36Z32VLH4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL36Z64VLH4 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Series | Kinetis L series |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Architecture | ARM Cortex-M0+ |
| USB Version | USB 2.0 |
| 패키지 | 64-LQFP (10 mm x 10 mm) |
| 실장 유형 | Surface mount |
| 동작 온도 | -40 C to +105 C |
| Program Memory Type | Flash |
| Memory Organization | 64K x 8 |
| CPU Bit Width | 32 bit |
| Core | ARM Cortex-M0+ |
| Peripheral Highlights | Segment LCD, analog, communication, timing, and control peripherals |
MKL36Z64VLH4 64-lqfp (10 mm x 10 mm) 핀 구성 가이드
MKL36Z64VLH4(64-lqfp (10 mm x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MKL36Z64VLH4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MKL36Z64VLH4 적합 용도: 6 애플리케이션s: Portable Data Logger, Battery-Powered Metering Instrument, USB-Connected Control Panel, Industrial Sensor Interface, Segment LCD Measurement Instrument, Battery-Powered Environmental Monitor.
Portable Data Logger
The MKL36Z64VLH4 fits a portable USB data logger because its 48 MHz Cortex-M0+ core provides control-loop headroom while 8 KB of SRAM supports buffering and protocol state. USB 2.0 creates a practical path for configuration, data transfer, and firmware updates without requiring a separate communications processor. The 64 KB flash supports event handling, configuration storage, and logging firmware. Keep USB traces short, route them as a controlled-impedance differential pair, and validate sustained write throughput against flash endurance before defining the logging rate.
추천
Battery-Powered Metering Instrument
The MKL36Z64VLH4 suits battery-powered metering equipment because the Kinetis L series is optimized for low-power operation and includes analog, timing, and control peripherals. The 48 MHz Cortex-M0+ core handles sampling coordination and local calculations, while segment LCD support aligns with compact meter displays. The 8 KB SRAM is adequate for short working buffers rather than large histories. Select the low-power mode, oscillator arrangement, and analog reference according to the manufacturer guidance to maximize time between battery replacements.
추천
USB-Connected Control Panel
A USB-connected control panel benefits from the MKL36Z64VLH4's combination of a 48 MHz Cortex-M0+ core, USB 2.0, and compact 64-LQFP packaging. The processor can supervise buttons, indicators, sensors, and local setpoint logic while USB handles host connectivity and configuration. The package's leaded pitch supports assembly processes that avoid very fine-pitch handling. Allocate USB interface protection carefully so component placement does not disturb the differential trace geometry or its ground reference.
추천
Industrial Sensor Interface
The MKL36Z64VLH4 can serve as the central controller for a compact industrial sensor interface when the design values low power, local processing, and USB service access. Its analog and communication peripherals allow sensing, conditioning, and digital interface functions to be consolidated in one device. The 48 MHz core provides deterministic scheduling without the overhead of a higher-tier processor. Confirm analog input ranges, reference accuracy, and peripheral pin multiplexing in the datasheet before assigning external sensor channels.
추천
Segment LCD Measurement Instrument
The MKL36Z64VLH4 is well aligned with segment LCD instruments because NXP identifies segment LCD support as a defining feature of the Kinetis L series. The device can drive display logic while the 48 MHz core manages measurements, keypad input, and low-power display behavior. Its 64 KB flash accommodates firmware for calibration and multiple measurement modes. Verify the exact segment and common-drive requirements in the manufacturer pin table and select external display drivers only if the internal resources are insufficient.
추천
Battery-Powered Environmental Monitor
The MKL36Z64VLH4 supports compact environmental monitors that periodically sample sensors, store readings, and communicate through USB. Its low-power Kinetis L architecture lets the design remain idle between measurements, while the 48 MHz core provides sufficient response time for sensor conditioning and event processing. The 8 KB SRAM accommodates bounded sample buffers, and 64 KB flash provides room for calibration tables and event logic. Define a duty cycle and data-retention policy that fit both SRAM capacity and flash endurance.
추천
추천 제품 요약
엔지니어링 참조 데이터: MKL36Z64VLH4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MKL36Z64VLK4 | MKL36Z128VLH4 | MKL36Z128VLK4 | MKL36Z32VLH4 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 128 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| USB Connectivity | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Temperature Grade | -40 C to +105 C | Confirm from manufacturer ordering table | -40 C to +105 C | Confirm from manufacturer ordering table | -40 C to +105 C |
| Program Memory Organization | 64K x 8 | 64K x 8 | 128K x 8 | 128K x 8 | 32K x 8 |
주요 차별점
- USB connectivity is integrated into a compact 64 KB Kinetis L series MCU (vs MKL36Z32VLH4)
- Memory-balanced configuration for firmware-intensive control designs (vs MKL36Z128VLH4)
- Extended-temperature capability for industrial and portable equipment (vs MKL36Z64VLK4)
설계 노트
Build the layout from the manufacturer package drawing and recommended footprint rather than a generic 64-LQFP template. Confirm pin 1 orientation, exposed thermal requirements if any, and the pad dimensions for the selected assembly process. Place decoupling capacitance directly at the corresponding supply pins, provide a low-impedance ground plane, and keep analog inputs away from fast switching and USB return currents.
Treat the USB interface as a controlled-impedance differential pair. Route both conductors together with a continuous ground reference, minimize stubs and test-point discontinuities, and place USB protection components close to the connector. Follow the NXP USB hardware-design guidance for trace geometry and power-path arrangement; signal integrity problems at USB 2.0 can appear as intermittent enumeration or data errors rather than obvious assembly faults.
Estimate the average and peak supply current before fixing the regulator and bulk-capacitor selection. Include MCU activity, analog peripherals, external interface loads, and USB attachment in the load cases. Decouple each supply rail at the pins with the capacitance and ESR range specified by the manufacturer, and verify startup current when the USB bus supplies or attaches to the board.
Do not treat the flash-memory size as interchangeable with firmware capability: the 64 KB program memory must accommodate the bootloader, application, configuration data, and any update buffer. The 8 KB SRAM also constrains logging, graphics, and protocol buffering. Check the memory map and pin-muxing options in the manufacturer documentation, and reserve programming and debug access before placing the final footprint.
규정 준수 정보
The retrieved manufacturer and distributor records identify the product as an industrial-temperature Kinetis KL36 microcontroller but do not explicitly state the requested compliance statuses.