MKL36Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MPN: MKL36Z64VLH4 ✓ 啟用中MKL36Z64VLH4 概覽
A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals on one device. The Cortex-M0+ core used by the MKL36Z64VLH4 is a compact 32-bit Arm architecture intended for cost-sensitive control applications that require deterministic real-time behavior, efficient interrupt handling, and low power consumption. Within the product hierarchy, this device is a 32-bit microcontroller with 64 KB flash, USB 2.0 connectivity, and a low-power Kinetis L series architecture.
The 64 KB flash provides embedded code storage for control firmware, while 8 KB of SRAM supports stack, data, and real-time working memory. A 48 MHz operating frequency gives the processor additional performance headroom for protocol handling and control-loop computation without requiring a higher-power processor architecture. USB 2.0 connectivity supports portable data-collection, configuration, logging, and host-device applications where a wired interface is more appropriate than a wireless link.
The Kinetis L series is designed around low-power operation for portable and metrology-oriented products. Its peripheral set supports analog measurement, communications, timing, and control functions in a single device, reducing component count in compact systems. The 64-LQFP package provides a conventional leaded footprint with good board inspection and assembly characteristics, while its 10 mm by 10 mm body allows a compact PCB implementation.
Typical uses include portable meters, data loggers, industrial monitoring equipment, battery-powered instruments, USB-connected control panels, and embedded sensing systems. The device is particularly suitable when a design needs USB connectivity, low-power operation, and a 32-bit control architecture without the memory and processing overhead of a higher-end Cortex-M processor.
For PCB design, follow the manufacturer pin-assignment and recommended-land-pattern tables in the MKL36Z64VLH4 datasheet and reference manual. Verify USB routing, supply decoupling, clock configuration, and programming-header access before layout release. This page combines the manufacturer product information with distributor technical records, application guidance, and engineering-focused design notes for faster component selection.
直接替換替代品,適用於 MKL36Z64VLH4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MKL36Z64VLH4 (相同外形與佔位) — 差異在於 Flash Memory, Package, Product Type, Series.
MKL36Z64VLK4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z128VLH4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z128VLK4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z32VLH4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z64VLH4 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Series | Kinetis L series |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Architecture | ARM Cortex-M0+ |
| USB Version | USB 2.0 |
| 封裝 | 64-LQFP (10 mm x 10 mm) |
| 安裝類型 | Surface mount |
| 工作溫度 | -40 C to +105 C |
| Program Memory Type | Flash |
| Memory Organization | 64K x 8 |
| CPU Bit Width | 32 bit |
| Core | ARM Cortex-M0+ |
| Peripheral Highlights | Segment LCD, analog, communication, timing, and control peripherals |
MKL36Z64VLH4 64-lqfp (10 mm x 10 mm) 腳位配置指南
MKL36Z64VLH4(64-lqfp (10 mm x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MKL36Z64VLH4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MKL36Z64VLH4 適用於 6 應用s: Portable Data Logger, Battery-Powered Metering Instrument, USB-Connected Control Panel, Industrial Sensor Interface, Segment LCD Measurement Instrument, Battery-Powered Environmental Monitor.
Portable Data Logger
The MKL36Z64VLH4 fits a portable USB data logger because its 48 MHz Cortex-M0+ core provides control-loop headroom while 8 KB of SRAM supports buffering and protocol state. USB 2.0 creates a practical path for configuration, data transfer, and firmware updates without requiring a separate communications processor. The 64 KB flash supports event handling, configuration storage, and logging firmware. Keep USB traces short, route them as a controlled-impedance differential pair, and validate sustained write throughput against flash endurance before defining the logging rate.
推薦
Battery-Powered Metering Instrument
The MKL36Z64VLH4 suits battery-powered metering equipment because the Kinetis L series is optimized for low-power operation and includes analog, timing, and control peripherals. The 48 MHz Cortex-M0+ core handles sampling coordination and local calculations, while segment LCD support aligns with compact meter displays. The 8 KB SRAM is adequate for short working buffers rather than large histories. Select the low-power mode, oscillator arrangement, and analog reference according to the manufacturer guidance to maximize time between battery replacements.
推薦
USB-Connected Control Panel
A USB-connected control panel benefits from the MKL36Z64VLH4's combination of a 48 MHz Cortex-M0+ core, USB 2.0, and compact 64-LQFP packaging. The processor can supervise buttons, indicators, sensors, and local setpoint logic while USB handles host connectivity and configuration. The package's leaded pitch supports assembly processes that avoid very fine-pitch handling. Allocate USB interface protection carefully so component placement does not disturb the differential trace geometry or its ground reference.
推薦
Industrial Sensor Interface
The MKL36Z64VLH4 can serve as the central controller for a compact industrial sensor interface when the design values low power, local processing, and USB service access. Its analog and communication peripherals allow sensing, conditioning, and digital interface functions to be consolidated in one device. The 48 MHz core provides deterministic scheduling without the overhead of a higher-tier processor. Confirm analog input ranges, reference accuracy, and peripheral pin multiplexing in the datasheet before assigning external sensor channels.
推薦
Segment LCD Measurement Instrument
The MKL36Z64VLH4 is well aligned with segment LCD instruments because NXP identifies segment LCD support as a defining feature of the Kinetis L series. The device can drive display logic while the 48 MHz core manages measurements, keypad input, and low-power display behavior. Its 64 KB flash accommodates firmware for calibration and multiple measurement modes. Verify the exact segment and common-drive requirements in the manufacturer pin table and select external display drivers only if the internal resources are insufficient.
推薦
Battery-Powered Environmental Monitor
The MKL36Z64VLH4 supports compact environmental monitors that periodically sample sensors, store readings, and communicate through USB. Its low-power Kinetis L architecture lets the design remain idle between measurements, while the 48 MHz core provides sufficient response time for sensor conditioning and event processing. The 8 KB SRAM accommodates bounded sample buffers, and 64 KB flash provides room for calibration tables and event logic. Define a duty cycle and data-retention policy that fit both SRAM capacity and flash endurance.
推薦
推薦產品摘要
工程參考資料,適用於 MKL36Z64VLH4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MKL36Z64VLK4 | MKL36Z128VLH4 | MKL36Z128VLK4 | MKL36Z32VLH4 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 128 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| USB Connectivity | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Temperature Grade | -40 C to +105 C | Confirm from manufacturer ordering table | -40 C to +105 C | Confirm from manufacturer ordering table | -40 C to +105 C |
| Program Memory Organization | 64K x 8 | 64K x 8 | 128K x 8 | 128K x 8 | 32K x 8 |
主要差異化特點
- USB connectivity is integrated into a compact 64 KB Kinetis L series MCU (對比MKL36Z32VLH4)
- Memory-balanced configuration for firmware-intensive control designs (對比MKL36Z128VLH4)
- Extended-temperature capability for industrial and portable equipment (對比MKL36Z64VLK4)
設計說明
Build the layout from the manufacturer package drawing and recommended footprint rather than a generic 64-LQFP template. Confirm pin 1 orientation, exposed thermal requirements if any, and the pad dimensions for the selected assembly process. Place decoupling capacitance directly at the corresponding supply pins, provide a low-impedance ground plane, and keep analog inputs away from fast switching and USB return currents.
Treat the USB interface as a controlled-impedance differential pair. Route both conductors together with a continuous ground reference, minimize stubs and test-point discontinuities, and place USB protection components close to the connector. Follow the NXP USB hardware-design guidance for trace geometry and power-path arrangement; signal integrity problems at USB 2.0 can appear as intermittent enumeration or data errors rather than obvious assembly faults.
Estimate the average and peak supply current before fixing the regulator and bulk-capacitor selection. Include MCU activity, analog peripherals, external interface loads, and USB attachment in the load cases. Decouple each supply rail at the pins with the capacitance and ESR range specified by the manufacturer, and verify startup current when the USB bus supplies or attaches to the board.
Do not treat the flash-memory size as interchangeable with firmware capability: the 64 KB program memory must accommodate the bootloader, application, configuration data, and any update buffer. The 8 KB SRAM also constrains logging, graphics, and protocol buffering. Check the memory map and pin-muxing options in the manufacturer documentation, and reserve programming and debug access before placing the final footprint.
合規資訊
The retrieved manufacturer and distributor records identify the product as an industrial-temperature Kinetis KL36 microcontroller but do not explicitly state the requested compliance statuses.