MSP430F1132IPW - 8MHz 16-Bit MCU with 8KB Flash | TI
MPN: MSP430F1132IPW ✓ AktifMSP430F1132IPW Genel Bakış
An ultra-low-power microcontroller is a semiconductor designed to execute embedded control tasks while minimizing energy consumption during active operation, standby, and shutdown. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators to improve code efficiency. Its five low-power modes make the device suitable for portable measurement systems where battery life depends on minimizing both processing demand and standby leakage.
The MSP430F1132 combines an 8 MHz maximum clock with a 125 ns instruction cycle, giving embedded designs a time-efficient platform for sampling, control, communications, and local data processing. Its 8 KB flash capacity provides on-chip program storage, while 256 bytes of SRAM support working data, stack operations, and peripheral buffering. The integrated 10-bit ADC supports analog measurements without requiring a separate converter.
Communication and timing resources broaden the device beyond basic GPIO control. An SPI interface supports synchronous peripheral connections and external data transfer, while UART provides asynchronous serial communication for sensor modules, data acquisition units, and service interfaces. The integrated timer supports periodic events, timing intervals, and deterministic control functions. Together, these resources allow a compact design to replace combinations of smaller discrete components.
Typical uses include battery-powered portable instruments, precision data loggers, industrial sensing nodes, compact environmental monitors, and low-power embedded measurement devices. The 10-bit ADC is particularly useful for temperature, pressure, level, and potentiometric sensing, while SPI and UART provide paths to external sensors, signal-conditioning circuits, and host equipment.
Designers should select decoupling close to the supply pins, maintain required clock and analog-reference conditions, and review low-current behavior across every operating mode. The 20-TSSOP package supports compact PCB layouts, while the industrial temperature range of -40°C to +85°C supports controlled industrial and measurement environments.
This product page combines the device architecture, package and peripheral details, application guidance, drop-in alternatives, and engineering considerations into a focused design reference. It is intended to accelerate component selection while keeping the final firmware, layout, and operating-mode decisions under the engineer's control.
Drop-in alternatifler için MSP430F1132IPW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MSP430F1132IPW (aynı form faktörü ve ayağa oturma) — farklı olan ADC Resolution, CPU Architecture, Flash Memory, Package, SRAM.
MSP430F1132IPWR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MSP430F1122IPW
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MSP430F1122IPWR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MSP430F1121IPW
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MSP430F1121IPWR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MSP430F1132IPW Maksimum Değerlendirmeler & Elektriksel Özellikler
| CPU Architecture | 16-bit RISC |
| Azami Saat Hızı | 8 MHz |
| Minimum Instruction Cycle Time | 125 ns |
| Flash Memory | 8 KB |
| Program Memory Organization | 8K x 8 |
| SRAM | 256 B |
| ADC Resolution | 10 bit |
| ADC Architecture | 10-bit mixed-signal ADC |
| Serial Interfaces | SPI and UART |
| Timer Support | Integrated timer |
| Low-Power Modes | 5 modes |
| Paket | 20-TSSOP |
| Package Width | 4.40 mm |
| Package Reference Length | 0.173 inch |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| Montaj Türü | Surface mount |
MSP430F1132IPW 0.173 inch Pin Yapısı Kılavuzu
MSP430F1132IPW (0.173 inch paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MSP430F1132IPW.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MSP430F1132IPW için uygundur 6 uygulamas: Battery-Powered Data Loggers, Portable Environmental Sensors, Industrial Process-Sensing Nodes, Precision Measurement Instruments, Embedded Control and Motor Monitoring, Connected IoT Sensor Nodes.
Battery-Powered Data Loggers
The MSP430F1132IPW fits portable data loggers because its 16-bit RISC CPU operates up to 8 MHz while five low-power modes reduce energy demand during idle intervals. The 8 KB flash stores firmware and compact event data, while 256 bytes of SRAM supports working variables and peripheral buffering. The timer can establish regular sampling intervals, and the 10-bit ADC can acquire analog sensor outputs directly. A typical design stores the logger in standby between measurements, wakes it through a timer or external interrupt, samples the sensor, and transmits results through UART. The principal trade-off is limited SRAM, so firmware should use compact buffers and stream larger records rather than retaining extensive history in RAM.
Önerilen
Portable Environmental Sensors
The MSP430F1132IPW suits compact environmental monitors that measure changing analog conditions and communicate intermittently with a host. Its 10-bit ADC can represent sensor outputs such as temperature, humidity, light, or gas levels, while SPI provides a connection for higher-throughput external sensing and UART supports a simple configuration interface. At an 8 MHz maximum clock, the device can combine acquisition, filtering, threshold evaluation, and data formatting in one controller. Five operating modes help separate measurement activity from standby periods, extending battery life in field deployments. Engineers should keep analog traces short, reference the ADC layout in the manufacturer documentation, and avoid servicing high-current peripherals unless the power budget permits it.
Önerilen
Industrial Process-Sensing Nodes
The MSP430F1132IPW can serve as the local controller in an industrial sensing node operating from -40°C to +85°C. Its 16-bit CPU provides efficient code execution for calibration, filtering, and threshold control, while the integrated 10-bit ADC handles analog process inputs. SPI can connect to external transducers or digital sensors, and UART can carry configuration commands or diagnostic data to a higher-level controller. The timer supports periodic sampling and maintenance tasks without relying on a separate timing IC. Because the flash and SRAM capacities are modest, the node should use interrupt-driven acquisition and transmit processed results instead of buffering large sample sets.
Önerilen
Precision Measurement Instruments
The MSP430F1132IPW is appropriate for compact measurement instruments that combine analog acquisition with local digital processing. Its 10-bit ADC supports basic voltage or resistance measurements, while the 125 ns instruction cycle allows the 16-bit CPU to execute acquisition routines, calibration transforms, and display or communication updates efficiently. SPI can connect to a high-resolution external converter when greater measurement resolution is required, and UART can provide a conventional control interface. The five low-power modes are useful in handheld instruments that spend most of their operating time waiting for a measurement. Layout should separate analog and digital paths and follow the manufacturer pin and reference guidance to preserve measurement quality.
Önerilen
Embedded Control and Motor Monitoring
The MSP430F1132IPW can monitor and control small embedded systems where a timer, serial links, and analog sensing must share one low-power controller. The timer can generate periodic control updates, measure an input interval, or coordinate a sampling schedule, while the 10-bit ADC can observe a motor-current or position-related analog signal. UART or SPI can connect to a display, sensor network, or supervisory controller. Its 16-bit RISC architecture is useful for compact algorithms, although the 256-byte SRAM limits complex buffering. Firmware should use a predictable main loop or interrupt structure, keep time-critical operations short, and validate all motor power paths and protection circuitry independently of the microcontroller.
Önerilen
Connected IoT Sensor Nodes
The MSP430F1132IPW works well in small IoT sensor nodes that must acquire data locally and communicate without a high-power processor. The 8 MHz MSP430 CPU can preprocess sensor values before transmission, reducing radio activity and energy use. Its 10-bit ADC handles simple analog sensors directly, SPI supports higher-throughput sensor and storage components, and UART can connect to a communication module. The five low-power modes let firmware sleep between scheduled samples and remain responsive to interrupts. Designers should treat communications bursts as the main dynamic load, select suitable voltage regulation and decoupling, and verify that the external radio, sensor, and regulator do not push the MCU supply outside its operating limits.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MSP430F1132IPW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MSP430F1132IPWR | MSP430F1122IPW | MSP430F1122IPWR | MSP430F1121IPW | MSP430F1121IPWR |
|---|---|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Ana Farklılayıcılar
- Higher documented memory configuration than the related MSP430F112x candidates (karşılaştırma:MSP430F1122IPW)
- Integrated mixed-signal and communications resources (karşılaştırma:MSP430F1121IPW)
- Direct same-device ordering alternative (karşılaştırma:MSP430F1132IPWR)
Tasarım Notları
Choose a supply that remains within the MSP430F1132 operating range across temperature, clock choice, and peripheral load. Place bulk and bypass capacitors close to the supply pins, with the shorter loop connected to the device ground reference. Because the MSP430 is designed around low-power modes, measure current during active execution, peripheral activity, standby, and shutdown rather than optimizing only the sleep state.
Route the 10-bit ADC input and reference paths away from SPI, UART, timer, and switching-supply traces. Preserve the manufacturer-recommended analog and digital layout, including a clear separation between input and return paths where practical. Review the pin-description table before assigning multiplexed functions because changing a pin's operating mode can affect neighboring analog or communication behavior.
Do not substitute an MSP430F112x option solely because it uses a similar 20-TSSOP package. Firmware size can exceed the flash of a related member, the SRAM may differ, and peripheral assignments may not match. Before approving a replacement, compare memory sizes, ADC channels, pin multiplexing, interrupt vectors, clock behavior, operating modes, and the complete package pin description.
Uyumluluk Bilgisi
The manufacturer ordering information identifies the MSP430F1132IPW as an industrial-temperature 20-TSSOP device, but no explicit environmental or material-compliance declarations are included.