MSP430F1132IPW - 8MHz 16-Bit MCU with 8KB Flash | TI
MPN: MSP430F1132IPW ✓ 啟用中MSP430F1132IPW 概覽
An ultra-low-power microcontroller is a semiconductor designed to execute embedded control tasks while minimizing energy consumption during active operation, standby, and shutdown. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators to improve code efficiency. Its five low-power modes make the device suitable for portable measurement systems where battery life depends on minimizing both processing demand and standby leakage.
The MSP430F1132 combines an 8 MHz maximum clock with a 125 ns instruction cycle, giving embedded designs a time-efficient platform for sampling, control, communications, and local data processing. Its 8 KB flash capacity provides on-chip program storage, while 256 bytes of SRAM support working data, stack operations, and peripheral buffering. The integrated 10-bit ADC supports analog measurements without requiring a separate converter.
Communication and timing resources broaden the device beyond basic GPIO control. An SPI interface supports synchronous peripheral connections and external data transfer, while UART provides asynchronous serial communication for sensor modules, data acquisition units, and service interfaces. The integrated timer supports periodic events, timing intervals, and deterministic control functions. Together, these resources allow a compact design to replace combinations of smaller discrete components.
Typical uses include battery-powered portable instruments, precision data loggers, industrial sensing nodes, compact environmental monitors, and low-power embedded measurement devices. The 10-bit ADC is particularly useful for temperature, pressure, level, and potentiometric sensing, while SPI and UART provide paths to external sensors, signal-conditioning circuits, and host equipment.
Designers should select decoupling close to the supply pins, maintain required clock and analog-reference conditions, and review low-current behavior across every operating mode. The 20-TSSOP package supports compact PCB layouts, while the industrial temperature range of -40°C to +85°C supports controlled industrial and measurement environments.
This product page combines the device architecture, package and peripheral details, application guidance, drop-in alternatives, and engineering considerations into a focused design reference. It is intended to accelerate component selection while keeping the final firmware, layout, and operating-mode decisions under the engineer's control.
直接替換替代品,適用於 MSP430F1132IPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MSP430F1132IPW (相同外形與佔位) — 差異在於 ADC Resolution, CPU Architecture, Flash Memory, Package, SRAM.
MSP430F1132IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F1122IPW
✅ 直接替換聯絡詢價
查看資料表 →MSP430F1122IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F1121IPW
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F1121IPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F1132IPW 最大額定值與電氣特性
| CPU Architecture | 16-bit RISC |
| 最大時脈頻率 | 8 MHz |
| Minimum Instruction Cycle Time | 125 ns |
| Flash Memory | 8 KB |
| Program Memory Organization | 8K x 8 |
| SRAM | 256 B |
| ADC Resolution | 10 bit |
| ADC Architecture | 10-bit mixed-signal ADC |
| Serial Interfaces | SPI and UART |
| Timer Support | Integrated timer |
| Low-Power Modes | 5 modes |
| 封裝 | 20-TSSOP |
| Package Width | 4.40 mm |
| Package Reference Length | 0.173 inch |
| 工作溫度範圍 | -40°C to +85°C |
| 安裝類型 | Surface mount |
MSP430F1132IPW 0.173 inch 腳位配置指南
MSP430F1132IPW(0.173 inch 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MSP430F1132IPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
MSP430F1132IPW 適用於 6 應用s: Battery-Powered Data Loggers, Portable Environmental Sensors, Industrial Process-Sensing Nodes, Precision Measurement Instruments, Embedded Control and Motor Monitoring, Connected IoT Sensor Nodes.
Battery-Powered Data Loggers
The MSP430F1132IPW fits portable data loggers because its 16-bit RISC CPU operates up to 8 MHz while five low-power modes reduce energy demand during idle intervals. The 8 KB flash stores firmware and compact event data, while 256 bytes of SRAM supports working variables and peripheral buffering. The timer can establish regular sampling intervals, and the 10-bit ADC can acquire analog sensor outputs directly. A typical design stores the logger in standby between measurements, wakes it through a timer or external interrupt, samples the sensor, and transmits results through UART. The principal trade-off is limited SRAM, so firmware should use compact buffers and stream larger records rather than retaining extensive history in RAM.
推薦
Portable Environmental Sensors
The MSP430F1132IPW suits compact environmental monitors that measure changing analog conditions and communicate intermittently with a host. Its 10-bit ADC can represent sensor outputs such as temperature, humidity, light, or gas levels, while SPI provides a connection for higher-throughput external sensing and UART supports a simple configuration interface. At an 8 MHz maximum clock, the device can combine acquisition, filtering, threshold evaluation, and data formatting in one controller. Five operating modes help separate measurement activity from standby periods, extending battery life in field deployments. Engineers should keep analog traces short, reference the ADC layout in the manufacturer documentation, and avoid servicing high-current peripherals unless the power budget permits it.
推薦
Industrial Process-Sensing Nodes
The MSP430F1132IPW can serve as the local controller in an industrial sensing node operating from -40°C to +85°C. Its 16-bit CPU provides efficient code execution for calibration, filtering, and threshold control, while the integrated 10-bit ADC handles analog process inputs. SPI can connect to external transducers or digital sensors, and UART can carry configuration commands or diagnostic data to a higher-level controller. The timer supports periodic sampling and maintenance tasks without relying on a separate timing IC. Because the flash and SRAM capacities are modest, the node should use interrupt-driven acquisition and transmit processed results instead of buffering large sample sets.
推薦
Precision Measurement Instruments
The MSP430F1132IPW is appropriate for compact measurement instruments that combine analog acquisition with local digital processing. Its 10-bit ADC supports basic voltage or resistance measurements, while the 125 ns instruction cycle allows the 16-bit CPU to execute acquisition routines, calibration transforms, and display or communication updates efficiently. SPI can connect to a high-resolution external converter when greater measurement resolution is required, and UART can provide a conventional control interface. The five low-power modes are useful in handheld instruments that spend most of their operating time waiting for a measurement. Layout should separate analog and digital paths and follow the manufacturer pin and reference guidance to preserve measurement quality.
推薦
Embedded Control and Motor Monitoring
The MSP430F1132IPW can monitor and control small embedded systems where a timer, serial links, and analog sensing must share one low-power controller. The timer can generate periodic control updates, measure an input interval, or coordinate a sampling schedule, while the 10-bit ADC can observe a motor-current or position-related analog signal. UART or SPI can connect to a display, sensor network, or supervisory controller. Its 16-bit RISC architecture is useful for compact algorithms, although the 256-byte SRAM limits complex buffering. Firmware should use a predictable main loop or interrupt structure, keep time-critical operations short, and validate all motor power paths and protection circuitry independently of the microcontroller.
推薦
Connected IoT Sensor Nodes
The MSP430F1132IPW works well in small IoT sensor nodes that must acquire data locally and communicate without a high-power processor. The 8 MHz MSP430 CPU can preprocess sensor values before transmission, reducing radio activity and energy use. Its 10-bit ADC handles simple analog sensors directly, SPI supports higher-throughput sensor and storage components, and UART can connect to a communication module. The five low-power modes let firmware sleep between scheduled samples and remain responsive to interrupts. Designers should treat communications bursts as the main dynamic load, select suitable voltage regulation and decoupling, and verify that the external radio, sensor, and regulator do not push the MCU supply outside its operating limits.
推薦
推薦產品摘要
工程參考資料,適用於 MSP430F1132IPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MSP430F1132IPWR | MSP430F1122IPW | MSP430F1122IPWR | MSP430F1121IPW | MSP430F1121IPWR |
|---|---|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
主要差異化特點
- Higher documented memory configuration than the related MSP430F112x candidates (對比MSP430F1122IPW)
- Integrated mixed-signal and communications resources (對比MSP430F1121IPW)
- Direct same-device ordering alternative (對比MSP430F1132IPWR)
設計說明
Choose a supply that remains within the MSP430F1132 operating range across temperature, clock choice, and peripheral load. Place bulk and bypass capacitors close to the supply pins, with the shorter loop connected to the device ground reference. Because the MSP430 is designed around low-power modes, measure current during active execution, peripheral activity, standby, and shutdown rather than optimizing only the sleep state.
Route the 10-bit ADC input and reference paths away from SPI, UART, timer, and switching-supply traces. Preserve the manufacturer-recommended analog and digital layout, including a clear separation between input and return paths where practical. Review the pin-description table before assigning multiplexed functions because changing a pin's operating mode can affect neighboring analog or communication behavior.
Do not substitute an MSP430F112x option solely because it uses a similar 20-TSSOP package. Firmware size can exceed the flash of a related member, the SRAM may differ, and peripheral assignments may not match. Before approving a replacement, compare memory sizes, ADC channels, pin multiplexing, interrupt vectors, clock behavior, operating modes, and the complete package pin description.
合規資訊
The manufacturer ordering information identifies the MSP430F1132IPW as an industrial-temperature 20-TSSOP device, but no explicit environmental or material-compliance declarations are included.