Texas Instruments

MSP430F1132IPW - 8MHz 16-Bit MCU with 8KB Flash | TI

料号: MSP430F1132IPW ✓ 量产中
20-TSSOP Package 8 MHz Speed 8 KB Memory
最小起订量: 1 |

MSP430F1132IPW 概述

Texas Instruments MSP430F1132IPW is an ultra-low-power 16-bit mixed-signal microcontroller rated for operation up to 8 MHz, with 8 KB of flash memory, 256 bytes of SRAM, a 10-bit ADC, SPI, UART, and timer peripherals, all housed in a 20-TSSOP package.

An ultra-low-power microcontroller is a semiconductor designed to execute embedded control tasks while minimizing energy consumption during active operation, standby, and shutdown. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators to improve code efficiency. Its five low-power modes make the device suitable for portable measurement systems where battery life depends on minimizing both processing demand and standby leakage.

The MSP430F1132 combines an 8 MHz maximum clock with a 125 ns instruction cycle, giving embedded designs a time-efficient platform for sampling, control, communications, and local data processing. Its 8 KB flash capacity provides on-chip program storage, while 256 bytes of SRAM support working data, stack operations, and peripheral buffering. The integrated 10-bit ADC supports analog measurements without requiring a separate converter.

Communication and timing resources broaden the device beyond basic GPIO control. An SPI interface supports synchronous peripheral connections and external data transfer, while UART provides asynchronous serial communication for sensor modules, data acquisition units, and service interfaces. The integrated timer supports periodic events, timing intervals, and deterministic control functions. Together, these resources allow a compact design to replace combinations of smaller discrete components.

Typical uses include battery-powered portable instruments, precision data loggers, industrial sensing nodes, compact environmental monitors, and low-power embedded measurement devices. The 10-bit ADC is particularly useful for temperature, pressure, level, and potentiometric sensing, while SPI and UART provide paths to external sensors, signal-conditioning circuits, and host equipment.

Designers should select decoupling close to the supply pins, maintain required clock and analog-reference conditions, and review low-current behavior across every operating mode. The 20-TSSOP package supports compact PCB layouts, while the industrial temperature range of -40°C to +85°C supports controlled industrial and measurement environments.

This product page combines the device architecture, package and peripheral details, application guidance, drop-in alternatives, and engineering considerations into a focused design reference. It is intended to accelerate component selection while keeping the final firmware, layout, and operating-mode decisions under the engineer's control.

直接替换替代料: MSP430F1132IPW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MSP430F1132IPW (相同外形与封装尺寸) ——差异在于 ADC Resolution, CPU Architecture, Flash Memory, Package, SRAM.

Texas Instruments
ADC Resolution: 10 bits
CPU Architecture: MSP430 16-bit RISC
Flash Memory: 4 KB
对比 MSP430F1132IPW →

MSP430F1132IPWR

✅ 直接替换 ⚠️ 规格未核验
📦 20-TSSOP
Same MSP430F1132 device and 20-TSSOP footprint; R suffix changes packing rather than the documented 8 MHz, 8 KB, and 256-byte ratings

📋 参考替代料(不在目录中)

MSP430F1122IPW

✅ 直接替换
Texas Instruments
📦 20-TSSOP
16-bit ultra-low-power mixed-signal microcontroller · MSP430 16-bit RISC · 8 MHz · 4 KB · 256 bytes · 10 bits · Integrated · Integrated

联系询价

查看数据手册 →

MSP430F1122IPWR

✅ 直接替换 ⚠️ 规格未核验
📦 20-TSSOP
MSP430F1122 family option with R packing suffix; exact memory and peripheral deltas from MSP430F1132IPW are not quantified

📋 参考替代料(不在目录中)

MSP430F1121IPW

✅ 直接替换 ⚠️ 规格未核验
📦 20-TSSOP
Related MSP430F1121 family option in 20-TSSOP; memory, ADC, and pin-function differences require engineering verification

📋 参考替代料(不在目录中)

MSP430F1121IPWR

✅ 直接替换
📦 20-TSSOP
Cross-reference result identifies MSP430F1121IPWR as a known equivalent candidate; it adds R packing but changes the underlying MSP430F1121 device

📋 参考替代料(不在目录中)

MSP430F1132IPW 最大额定值与电气特性

CPU Architecture 16-bit RISC
最大时钟频率 8 MHz
Minimum Instruction Cycle Time 125 ns
Flash Memory 8 KB
Program Memory Organization 8K x 8
SRAM 256 B
ADC Resolution 10 bit
ADC Architecture 10-bit mixed-signal ADC
Serial Interfaces SPI and UART
Timer Support Integrated timer
Low-Power Modes 5 modes
封装 20-TSSOP
Package Width 4.40 mm
Package Reference Length 0.173 inch
工作温度范围 -40°C to +85°C
安装类型 Surface mount

MSP430F1132IPW 0.173 inch 引脚配置指南

MSP430F1132IPW(0.173 inch 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F1132IPW 的 0.173 inch 封装引脚图

暂无详细引脚数据: MSP430F1132IPW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F1132IPW 适用于 6 应用s: Battery-Powered Data Loggers, Portable Environmental Sensors, Industrial Process-Sensing Nodes, Precision Measurement Instruments, Embedded Control and Motor Monitoring, Connected IoT Sensor Nodes.

🔋

Battery-Powered Data Loggers

The MSP430F1132IPW fits portable data loggers because its 16-bit RISC CPU operates up to 8 MHz while five low-power modes reduce energy demand during idle intervals. The 8 KB flash stores firmware and compact event data, while 256 bytes of SRAM supports working variables and peripheral buffering. The timer can establish regular sampling intervals, and the 10-bit ADC can acquire analog sensor outputs directly. A typical design stores the logger in standby between measurements, wakes it through a timer or external interrupt, samples the sensor, and transmits results through UART. The principal trade-off is limited SRAM, so firmware should use compact buffers and stream larger records rather than retaining extensive history in RAM.

🌡️

Portable Environmental Sensors

The MSP430F1132IPW suits compact environmental monitors that measure changing analog conditions and communicate intermittently with a host. Its 10-bit ADC can represent sensor outputs such as temperature, humidity, light, or gas levels, while SPI provides a connection for higher-throughput external sensing and UART supports a simple configuration interface. At an 8 MHz maximum clock, the device can combine acquisition, filtering, threshold evaluation, and data formatting in one controller. Five operating modes help separate measurement activity from standby periods, extending battery life in field deployments. Engineers should keep analog traces short, reference the ADC layout in the manufacturer documentation, and avoid servicing high-current peripherals unless the power budget permits it.

🏭

Industrial Process-Sensing Nodes

The MSP430F1132IPW can serve as the local controller in an industrial sensing node operating from -40°C to +85°C. Its 16-bit CPU provides efficient code execution for calibration, filtering, and threshold control, while the integrated 10-bit ADC handles analog process inputs. SPI can connect to external transducers or digital sensors, and UART can carry configuration commands or diagnostic data to a higher-level controller. The timer supports periodic sampling and maintenance tasks without relying on a separate timing IC. Because the flash and SRAM capacities are modest, the node should use interrupt-driven acquisition and transmit processed results instead of buffering large sample sets.

📟

Precision Measurement Instruments

The MSP430F1132IPW is appropriate for compact measurement instruments that combine analog acquisition with local digital processing. Its 10-bit ADC supports basic voltage or resistance measurements, while the 125 ns instruction cycle allows the 16-bit CPU to execute acquisition routines, calibration transforms, and display or communication updates efficiently. SPI can connect to a high-resolution external converter when greater measurement resolution is required, and UART can provide a conventional control interface. The five low-power modes are useful in handheld instruments that spend most of their operating time waiting for a measurement. Layout should separate analog and digital paths and follow the manufacturer pin and reference guidance to preserve measurement quality.

⚙️

Embedded Control and Motor Monitoring

The MSP430F1132IPW can monitor and control small embedded systems where a timer, serial links, and analog sensing must share one low-power controller. The timer can generate periodic control updates, measure an input interval, or coordinate a sampling schedule, while the 10-bit ADC can observe a motor-current or position-related analog signal. UART or SPI can connect to a display, sensor network, or supervisory controller. Its 16-bit RISC architecture is useful for compact algorithms, although the 256-byte SRAM limits complex buffering. Firmware should use a predictable main loop or interrupt structure, keep time-critical operations short, and validate all motor power paths and protection circuitry independently of the microcontroller.

🧩

Connected IoT Sensor Nodes

The MSP430F1132IPW works well in small IoT sensor nodes that must acquire data locally and communicate without a high-power processor. The 8 MHz MSP430 CPU can preprocess sensor values before transmission, reducing radio activity and energy use. Its 10-bit ADC handles simple analog sensors directly, SPI supports higher-throughput sensor and storage components, and UART can connect to a communication module. The five low-power modes let firmware sleep between scheduled samples and remain responsive to interrupts. Designers should treat communications bursts as the main dynamic load, select suitable voltage regulation and decoupling, and verify that the external radio, sensor, and regulator do not push the MCU supply outside its operating limits.

推荐产品汇总

MSP430F1132IPW Texas Instruments 用于: Battery-Powered Data Loggers, Portable Environmental Sensors, Industrial Process-Sensing Nodes, Precision Measurement Instruments, Embedded Control and Motor Monitoring, Connected IoT Sensor Nodes MSP430F1132IPWR Reel-packed same-family controller option 用于: Battery-Powered Data Loggers, Precision Measurement Instruments MSP430F1122IPW Texas Instruments 用于: Portable Environmental Sensors MSP430F1121IPW Related MSP430 sensing-controller family 用于: Industrial Process-Sensing Nodes MSP430F1122IPWR Related MSP430 control-controller family 用于: Embedded Control and Motor Monitoring MSP430F1121IPWR Related MSP430 embedded-node option 用于: Connected IoT Sensor Nodes
What is the MSP430F1132IPW?
The MSP430F1132IPW is a Texas Instruments ultra-low-power, 16-bit mixed-signal microcontroller with an 8 MHz clock, 8 KB of flash memory, 256 bytes of SRAM, and a 20-TSSOP package. According to the manufacturer product page and datasheet, it combines a 10-bit ADC, SPI, UART, timer, and five low-power modes for portable measurement and embedded-control designs.
What are the key specifications of MSP430F1132IPW that engineers should know?
The MSP430F1132IPW combines an 8 MHz maximum clock, 16-bit RISC architecture, 125 ns instruction cycle, 8 KB flash, and 256-byte SRAM with a 10-bit ADC, SPI, UART, and timer. According to the Texas Instruments product documentation, its five low-power modes and mixed-signal feature set support compact, battery-powered sensing and control products using a 20-TSSOP package.
Where can I download the MSP430F1132IPW datasheet PDF?
The official MSP430F1132 datasheet is available through the Texas Instruments product page at https://www.ti.com/product/MSP430F1132. According to Texas Instruments, this page provides the device data sheet together with ordering information, quality data, application material, and parameter details for the MSP430F1132IPW ordering option.
Where can I find the MSP430F1132IPW pinout?
The MSP430F1132IPW pinout is found in the pin-configuration section and package diagrams of the Texas Instruments MSP430F1132 data sheet at https://www.ti.com/product/MSP430F1132. The device uses a 20-pin TSSOP, so use the pin-description table to assign power, ground, reset, clock, analog, and digital signals before routing the PCB.
What peripherals are integrated into the MSP430F1132IPW?
The MSP430F1132IPW integrates a 10-bit ADC, SPI, UART, and timer in addition to its 16-bit RISC CPU and GPIO resources. According to the Texas Instruments product page, these peripherals support analog measurement, synchronous and asynchronous data transfer, and periodic timing functions, reducing the external circuitry needed for a compact embedded instrument.
What can replace the MSP430F1132IPW?
The MSP430F1132IPWR is the closest directly related replacement because it retains the MSP430F1132 device identity, 20-TSSOP footprint, 8 MHz clock, 8 KB flash, 256-byte SRAM, ADC, SPI, UART, and timer configuration. According to the manufacturer ordering nomenclature, the R suffix changes the production packing method, so confirm reel orientation, quantity, and labeling before substitution.
Is MSP430F1132IPW suitable for battery-powered measurement devices?
Yes, the MSP430F1132IPW is suitable for battery-powered measurement devices because it combines a 16-bit RISC CPU, 10-bit ADC, timer, SPI, and UART with five low-power modes. According to the Texas Instruments family description, the architecture is optimized for extended battery life in portable measurement applications while retaining enough local processing capability for sensor acquisition.
What is the difference between MSP430F1132IPW and MSP430F1132IPWR?
The principal documented difference is the orderable packing suffix: MSP430F1132IPW uses the standard TI ordering form, while MSP430F1132IPWR specifies the R packing option. Both identify the same MSP430F1132 20-TSSOP device family with an 8 MHz clock, 8 KB flash, 256-byte SRAM, 10-bit ADC, SPI, UART, and timer.
MSP430F1132IPW vs MSP430F1122IPW - which is better for a new design?
Choose MSP430F1132IPW when the design benefits from the documented 8 KB flash, 256-byte SRAM, and 10-bit ADC configuration of the MSP430F1132 family. The cross-reference information associates MSP430F1122IPW with the MSP430F1132 family, but it does not establish identical memory or peripheral ratings, so verify the complete electrical and pin compatibility before replacing one with the other.
When should I choose MSP430F1132IPW over MSP430F1122IPW?
Choose MSP430F1132IPW when the specified 8 KB flash, 256-byte SRAM, and integrated 10-bit ADC match the firmware and analog requirements of the target design. According to Texas Instruments, the MSP430F1132 also includes SPI, UART, and a timer; use MSP430F1122IPW only after its memory capacity, ADC performance, pin mapping, and firmware requirements have been checked.
What is the best Texas Instruments equivalent for MSP430F1132IPW?
The best directly related Texas Instruments equivalent is MSP430F1132IPWR because it uses the same MSP430F1132 device and 20-TSSOP configuration while changing the orderable packing suffix. According to manufacturer ordering information, the R suffix denotes a different production packing format, so it is electrically similar but requires confirmation of tape orientation, feed direction, and quantity.
How much power does the MSP430F1132IPW consume?
The MSP430F1132IPW is designed for low-power operation, but its exact current depends on supply voltage, clock rate, active processing, and the selected standby or shutdown mode. According to the family description, the device has five low-power modes; determine the worst-case operating and sleep current from the manufacturer data sheet for the exact clock, temperature, and peripheral configuration used in the design.
How do I choose between MSP430F1132IPW and MSP430F1121IPW?
Select MSP430F1132IPW when the design needs the documented 8 KB flash, 256-byte SRAM, and 10-bit ADC of the MSP430F1132 family. The cross-reference information names MSP430F1121IPWR as a related MSP430F1121-family option, but it does not quantify memory or peripheral differences, so verify those ratings and confirm pin compatibility before making a replacement.
Is MSP430F1132IPW in stock and what is its lead time?
Current inventory and lead time are not asserted on this page because stock changes by order quantity and market conditions. Use the Request a Quote form on this page to request the current MSP430F1132IPW quantity, production allocation, and delivery estimate from XAIPART, including confirmation of the 20-TSSOP packing configuration.
Where can I buy MSP430F1132IPW online and what is the price?
Use the Request a Quote form on this page to request MSP430F1132IPW availability, current pricing, and quantity breaks from XAIPART. The Texas Instruments ordering page identifies the exact 20-TSSOP configuration, while a complete commercial response should confirm the required order quantity, packing method, lead time, and any date-sensitive inventory constraints.
What is the MSP430F1132IPW pin count and package?
The MSP430F1132IPW is packaged in a 20-TSSOP with a listed body width of 4.40 mm and reference length of 0.173 inch. According to Texas Instruments ordering information, the IPW suffix identifies this 20-pin TSSOP configuration. Assign individual signal names and directions using the pin-description table in the manufacturer data sheet.

工程参考数据: MSP430F1132IPW ——对比、设计指导和合规信息。

选型指南

Choose MSP430F1132IPW when a design needs a compact 16-bit controller with 8 MHz performance, 8 KB flash, 256 bytes of SRAM, a 10-bit ADC, SPI, UART, a timer, and five low-power modes. MSP430F1132IPWR is the preferred alternative when the electrical configuration is unchanged and only the reel packing method differs. Treat MSP430F1122IPW and MSP430F1122IPWR as conditional choices only after their flash, SRAM, ADC, and pin functions match the application. MSP430F1121IPW and MSP430F1121IPWR require the same comparison and should be selected only when their lower-resource configuration is sufficient. For every alternative, validate firmware size, RAM allocation, interrupt-vector compatibility, analog performance, operating temperature, and the PCB footprint before releasing a new production design.

与替代料对比

参数 本产品 MSP430F1132IPWR MSP430F1122IPW MSP430F1122IPWR MSP430F1121IPW MSP430F1121IPWR
Package 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

关键差异点

  • Higher documented memory configuration than the related MSP430F112x candidates (对比 MSP430F1122IPW)
  • Integrated mixed-signal and communications resources (对比 MSP430F1121IPW)
  • Direct same-device ordering alternative (对比 MSP430F1132IPWR)

设计说明

Choose a supply that remains within the MSP430F1132 operating range across temperature, clock choice, and peripheral load. Place bulk and bypass capacitors close to the supply pins, with the shorter loop connected to the device ground reference. Because the MSP430 is designed around low-power modes, measure current during active execution, peripheral activity, standby, and shutdown rather than optimizing only the sleep state.

Route the 10-bit ADC input and reference paths away from SPI, UART, timer, and switching-supply traces. Preserve the manufacturer-recommended analog and digital layout, including a clear separation between input and return paths where practical. Review the pin-description table before assigning multiplexed functions because changing a pin's operating mode can affect neighboring analog or communication behavior.

Do not substitute an MSP430F112x option solely because it uses a similar 20-TSSOP package. Firmware size can exceed the flash of a related member, the SRAM may differ, and peripheral assignments may not match. Before approving a replacement, compare memory sizes, ADC channels, pin multiplexing, interrupt vectors, clock behavior, operating modes, and the complete package pin description.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer ordering information identifies the MSP430F1132IPW as an industrial-temperature 20-TSSOP device, but no explicit environmental or material-compliance declarations are included.

相关搜索

MSP430F1132IPW datasheet MSP430F1132IPW pinout MSP430F1132IPW datasheet pdf Texas Instruments MSP430F1132IPW MSP430F1132IPW 20-TSSOP MSP430F1132IPW 8MHz 8KB flash MSP430F1132IPW equivalent MSP430F1132IPW replacement MSP430F1132IPW vs MSP430F1122IPW MSP430F1132IPW application circuit MSP430F1132IPW price MSP430F1132IPW stock MSP430F1132IPW ADC SPI UART MSP430F1132IPW programming

相关元器件 & 术语

Texas Instruments MSP430F1132IPW MSP430F1132IPWR MSP430F1122IPW MSP430F1122IPWR MSP430F1121IPW MSP430F1121IPWR MSP430 16-bit RISC CPU mixed-signal microcontroller embedded microcontroller ultra-low-power MCU 10-bit ADC SPI UART timer peripheral flash memory SRAM 20-TSSOP TSSOP package family surface-mount package low-power mode battery-powered measurement industrial sensing IoT sensor node
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情