Texas Instruments

OPA251PA - 25µA Low-Power Rail-to-Rail Op Amp | Texas Instruments

MPN: OPA251PA ✓ Aktif
Single supply Vdss 25 µA Id 8-pin PDIP Package
MOQ: 1 |

OPA251PA Genel Bakış

The Texas Instruments OPA251PA is a single, low-power operational amplifier designed for single-supply systems, featuring 25 µA typical quiescent current, 35 kHz gain-bandwidth product, and 0.01 V/µs slew rate in an 8-pin PDIP package. It accepts a supply range of 1.35 V to 18 V and supports rail-to-rail output swing for portable, battery-powered, and low-voltage instrumentation.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its inverting and non-inverting inputs. The OPA251 belongs to the broader hierarchy of operational amplifier, analog amplifier, amplifier IC, and power management semiconductor. Its micropower design is especially useful where battery energy must be conserved while the output must remain capable of driving a measurement, control, or conversion stage.

Important characteristics include 25 µA typical supply current, low input offset voltage, high common-mode rejection, and high open-loop gain. The 35 kHz gain-bandwidth product supports low-frequency signal conditioning, while the 0.01 V/µs slew rate is suitable for modest-amplitude waveforms. Rail-to-rail output operation increases usable output range in systems whose supply voltage is constrained.

The OPA251 uses a micropower internal architecture optimized for portable instrumentation rather than high-speed signal processing. With one amplifier in the 8-pin PDIP package, it supports cost-sensitive analog designs that need a single operational amplifier without the overhead of a dual or quad device. The 1.35 V minimum supply voltage also makes it applicable to low-energy sensor and monitoring circuits.

Typical uses include battery-powered sensor conditioning, portable measurement instrumentation, low-current analog signal processing, and the input stage of an analog-to-digital converter. In a typical application, the amplifier processes a sensor voltage referenced around ground, gains the signal to an appropriate level, and presents it to an ADC or comparator while minimizing standby current.

Designers should account for the 35 kHz bandwidth when selecting closed-loop gain and signal frequency. Input and output stability must be evaluated using the recommended application circuit, and the circuit must remain within the 1.35 V to 18 V supply range. Decoupling capacitors should be placed close to the supply pins to minimize supply disturbance.

This page organizes the OPA251PA electrical characteristics, package information, replacement considerations, and application guidance into an engineering-focused reference. It also identifies where an alternative is technically appropriate and, equally important, where a footprint or parameter mismatch makes a substitution unsuitable.

Drop-in alternatifler için OPA251PA — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

OPA251PAG4

✅ Yerleştirme
📦 8-pin PDIP
Same OPA251 family electrical configuration and 8-pin PDIP footprint; lead-free ordering designation differs from OPA251PA

📋 Katalogda Olmayan Referans Alternatifi

OPA251PA Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single operational amplifier
Supply Architecture Single supply
Number of Channels 1 channel
Nominal Supply Voltage 15 V
Operating Supply Voltage Range 1.35 V to 18 V
Typical Quiescent Current 25 µA
Gain-Bandwidth Product 35 kHz
Slew Rate 0.01 V/µs
Output Swing Rail-to-rail
Paket 8-pin PDIP
Montaj Türü Through-hole

OPA251PA 8-pin pdip Pin Yapısı Kılavuzu

OPA251PA (8-pin pdip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin pdip paket pin çizelgesi için OPA251PA

Ayrıntılı pin çıkış verisi mevcut değil: OPA251PA.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA251PA için uygundur 3 uygulamas: Sinyal İşleme, Veri Toplama, Ses İşleme.

📊

Sinyal İşleme

OPA251PA kullanarak sensör sinyallerini güçlendirme ve filtreleme.

📈

Veri Toplama

OPA251PA ile analitik sinyallerin dijital işleme için dönüştürülmesi.

🎧

Ses İşleme

OPA251PA ile ses sinyalinin güçlendirilmesi ve işlenmesi.

What are the key specifications of OPA251PA that engineers should know?
The OPA251PA combines a 1.35 V to 18 V single-supply range, 25 µA typical quiescent current, 35 kHz gain-bandwidth product, and 0.01 V/µs slew rate in one amplifier. According to the Texas Instruments OPA251 product page and manufacturer datasheet, it also provides rail-to-rail output swing, low input offset voltage, high common-mode rejection, and high open-loop gain. These characteristics position it as a low-power, general-purpose amplifier for portable instrumentation and low-voltage sensor interfaces.
What is the operating voltage of OPA251PA?
The OPA251PA operates from 1.35 V to 18 V with a single supply. According to the Texas Instruments OPA251 product page, the nominal application supply is 15 V, while the family is specifically designed for low-voltage, battery-powered equipment. The 1.35 V lower limit is particularly useful when the amplifier must operate directly from a low-energy source without requiring a boosted supply.
How much current does the OPA251PA consume?
The OPA251PA has a typical quiescent current of 25 µA. The Texas Instruments manufacturer datasheet identifies the device as a micropower operational amplifier, and the product page highlights its very low power consumption for portable applications. This low supply current reduces the continuous load placed on batteries, although total system consumption also depends on the operating mode, load, feedback network, and external circuitry.
Is OPA251PA suitable for battery-powered applications?
Yes, the OPA251PA is specifically designed for battery-powered and portable applications. Its 25 µA typical quiescent current, 1.35 V minimum supply voltage, and rail-to-rail output swing support low-energy operation. According to the Texas Instruments OPA251 family information, the device combines low offset voltage, high common-mode rejection, and high open-loop gain with its low-power architecture for portable instrumentation.
What is the bandwidth and slew rate of OPA251PA?
The OPA251PA has a 35 kHz gain-bandwidth product and a slew rate of 0.01 V/µs. These figures make it appropriate for low-frequency sensing and signal-conditioning paths rather than high-speed waveform processing. According to the Texas Instruments manufacturer datasheet, closed-loop bandwidth will vary with the selected noise gain, so the gain and signal-frequency combination should be checked against the relevant performance curve.
Can OPA251PA operate from a single 1.35 V supply?
Yes, the OPA251PA is specified for single-supply operation from 1.35 V to 18 V. The Texas Instruments product page identifies it as a single-supply micropower amplifier, and the manufacturer datasheet lists rail-to-rail output operation. When using the minimum supply, verify the input common-mode range, output swing, and stability for the selected gain configuration against the datasheet curves.
Where can I download the OPA251PA datasheet PDF?
The official OPA251PA datasheet PDF is available from Texas Instruments through the OPA251 product page and the manufacturer's direct datasheet link. It provides the pin description, electrical characteristics, typical performance curves, application information, and ordering information for the OPA251 family. Use the manufacturer document when assigning pins, checking limits, and reproducing the recommended application circuit.
Where can I find the OPA251PA pinout and package details?
The OPA251PA uses an 8-pin PDIP package, and its complete pin description is contained in the Texas Instruments OPA251 manufacturer datasheet. The pin-description table should be used when assigning input, output, supply, offset-null, and no-connect functions. Pin labels should not be inferred from a generic operational-amplifier drawing because the offset-null and no-connect assignments are family-specific.
What can replace the OPA251PA without changing the PCB?
A true drop-in replacement must use the same 8-pin PDIP footprint, preserve the OPA251PA pin assignments, and remain within the required supply, bandwidth, slew-rate, offset, and current limits. No additional cross-manufacturer part is established as a pin-compatible replacement in the current cross-reference records. Treat any proposed substitute as a design change until its manufacturer datasheet and physical dimensions have been checked.
Is OPA251PA the same as OPA251PAG4?
The OPA251PAG4 is the lead-free ordering variant associated with the same OPA251 electrical family, while OPA251PA denotes the standard ordering code. Their device-level performance and 8-pin PDIP package are intended to match, but procurement requirements may distinguish the green environmental processing option from the standard part. Confirm the exact orderable MPN before substitution because environmental and assembly requirements can drive that choice.
When should I choose OPA251PA over a higher-bandwidth operational amplifier?
Choose the OPA251PA when the signal is low frequency, the operating current is important, and the circuit does not require high slew rate. Its 35 kHz gain-bandwidth product and 0.01 V/µs slew rate trade bandwidth for a 25 µA typical quiescent current. A higher-bandwidth amplifier is preferable when fast transients, large signal swings, or wider closed-loop bandwidth must be handled without clipping.
Is OPA251PA suitable for low-voltage sensor conditioning?
Yes, the OPA251PA is suitable for many low-voltage sensor-conditioning stages. Its 1.35 V minimum supply, 25 µA typical quiescent current, rail-to-rail output, and low offset voltage align with battery-operated measurement circuits. Confirm the sensor output range, required common-mode range, noise performance, and closed-loop stability for the chosen gain before finalizing the design.
Where to buy OPA251PA online?
Use the Request a Quote form on this page to request OPA251PA availability, lot requirements, and delivery terms. The exact MPN is a Texas Instruments 8-pin PDIP operational amplifier, and its ordering code should be entered without adding or removing package suffixes. The form is the appropriate route for current stock confirmation and a purchase quotation.
What is the price of OPA251PA?
The current unit price for OPA251PA is generated through the Request a Quote form on this page because commercial terms can change with quantity, inventory, and packaging requirements. Submit the required quantity, grade, and target delivery location for a current quotation. The manufacturer ordering code is OPA251PA, an 8-pin PDIP single operational amplifier.
What is the lead time and stock status for OPA251PA?
Current stock and lead time for OPA251PA should be confirmed through the Request a Quote form on this page. Enter the required quantity and shipment destination so the order can be matched to the correct 8-pin PDIP ordering option. For production planning, also request lot traceability and projected replenishment information when consistent schedule assurance is required.

Mühendislik referans verileri: OPA251PA — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the OPA251PA when a portable or battery-powered circuit needs one low-power operational amplifier, a supply as low as 1.35 V, and rail-to-rail output swing. Its 25 µA typical quiescent current, 35 kHz gain-bandwidth product, and 0.01 V/µs slew rate are appropriate for low-frequency sensor signals and portable measurement systems. Choose OPA251PAG4 when its lead-free ordering designation satisfies the assembly or environmental requirement while retaining the same OPA251 family electrical performance and 8-pin PDIP footprint. Do not choose either part for high-speed pulse shaping, wide-bandwidth signal acquisition, or applications requiring a much faster slew rate. For those designs, select a higher-bandwidth amplifier and re-evaluate the PCB layout. Because no additional cross-manufacturer drop-in part is established by the current cross-reference records, any proposed alternative should be treated as a redesign until its pinout, package dimensions, supply range, bandwidth, output swing, and stability have been verified.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün OPA251PAG4
Package 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments
Amplifier Configuration Single amplifier Single amplifier
Supply Type Single supply Single supply
Supply Voltage Range 1.35 V to 18 V 1.35 V to 18 V
Typical Quiescent Current 25 µA 25 µA
Gain-Bandwidth Product 35 kHz 35 kHz
Slew Rate 0.01 V/µs 0.01 V/µs
Output Swing Rail-to-rail Rail-to-rail

Ana Farklılayıcılar

  • Very low quiescent current for a general-purpose amplifier (karşılaştırma:OPA251PAG4)
  • Single-supply operation extends to 1.35 V (karşılaştırma:OPA251PAG4)
  • Same 8-pin PDIP mechanical interface (karşılaştırma:OPA251PAG4)

Tasarım Notları

Use the 25 µA typical quiescent current as the baseline for low-power design, but include feedback-network and load currents in the complete power budget. For a single-supply circuit, bypass the supply pins with ceramic capacitance placed close to the package and follow the manufacturer datasheet's recommended values. Check that the bypass capacitor's DC bias rating remains effective at the actual supply voltage.

Treat the 35 kHz gain-bandwidth product as the primary limit on usable closed-loop bandwidth. Increasing closed-loop gain reduces bandwidth and can also increase output-noise contribution. For sensor signals, select a gain that keeps the signal bandwidth below the corresponding gain-bandwidth limit with margin, then verify phase margin and output settling using the datasheet curves for the intended operating supply.

Do not assume that the rail-to-rail output specification removes all common-mode restrictions at the input. Verify the input common-mode range, output swing, offset behavior, and stability against the manufacturer datasheet for the selected gain and load. The 0.01 V/µs slew rate can also limit large-amplitude output transitions, making it unsuitable for fast pulse or waveform requirements.

Keep the 8-pin PDIP footprint and its pin assignments unchanged when using OPA251PAG4 as the lead-free ordering option. Confirm orientation against the pin-description table in the manufacturer datasheet rather than a generic operational-amplifier symbol. Maintain a low-impedance ground return and place input components so their parasitic capacitance does not create excessive feedback or reduce phase margin.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The OPA251PA is a general-purpose operational amplifier rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer's current product or material documentation.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

OPA251PA datasheet OPA251PA pinout OPA251PA datasheet pdf OPA251PA equivalent OPA251PA replacement OPA251PA drop-in substitute OPA251PA 8-pin PDIP OPA251PA 25uA op amp OPA251PA 35kHz bandwidth OPA251PA battery powered amplifier OPA251PA vs OPA251PAG4 OPA251PA price OPA251PA stock Texas Instruments OPA251PA OPA251PA low voltage sensor amplifier

İlgili Bileşenler ve Terimler

Texas Instruments OPA251PA OPA251PAG4 OPA251 operational amplifier analog amplifier amplifier IC single-supply amplifier micropower amplifier rail-to-rail output gain-bandwidth product slew rate quiescent current input offset voltage common-mode rejection open-loop gain battery-powered instrumentation low-voltage sensor conditioning 8-pin PDIP through-hole package surface-mount electronics semiconductor analog-to-digital converter
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle