PCM1681PWP - 8-Channel 24-Bit 192kHz Audio DAC | TI
MPN: PCM1681PWP ✓ AktifPCM1681PWP Genel Bakış
An audio DAC is a signal-conversion component that converts digital audio samples into analog voltages suitable for amplification, mixing, line-level processing, or loudspeaker drive stages. Within the broader product hierarchy, the PCM1681PWP is an audio DAC, a digital-to-analog converter, a data-conversion IC, and ultimately a semiconductor designed for professional and consumer audio signal paths.
The device provides eight 24-bit conversion channels, 192 kHz sampling capability, and 105 dB SNR. Its I2S interface supports conventional stereo-oriented serial audio arrangements, while TDM mode expands the serial data path for multichannel configurations. The 28-lead HTSSOP PowerPAD package integrates the converter and support circuitry into a surface-mount footprint while providing a thermal pad for improved heat dissipation.
Texas Instruments describes the PCM1681 as a CMOS monolithic integrated circuit using Burr-Brown enhanced multilevel delta-sigma architecture. This architecture provides high-resolution conversion and high tolerance to clock jitter. The manufacturer also identifies I2S and TDM operation, making the device suitable for systems that require flexible channel serialization and synchronized multichannel playback.
Typical uses include surround-sound audio receivers, multichannel home-theater equipment, professional mixers, digital television systems, automotive infotainment platforms, and other audio products requiring eight DAC channels. The 192 kHz rate supports high-resolution audio streams, while the 105 dB SNR specification is appropriate for low-noise playback and signal-chain designs.
PCB implementation should prioritize short, impedance-controlled serial-data and clock routes, solid analog grounding, and correct decoupling around the power terminals. The exposed thermal pad requires a manufacturer-compatible land pattern and adequate copper area because sustained conversion activity can dissipate heat. Audio clocks should be clean and jitter-resistant to preserve the benefit of the converter architecture.
This page organizes the exact PCM1681PWP ordering information, package details, interface capabilities, engineering considerations, and same-family replacement choices into one practical reference. It also distinguishes documented functions from parameters that still require confirmation from the manufacturer datasheet, helping engineers plan sourcing and circuit reviews without overlooking footprint or timing constraints.
Drop-in alternatifler için PCM1681PWP — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PCM1681PWP (aynı form faktörü ve ayağa oturma) — farklı olan Digital Audio Interface, Package, Number of DAC Channels, Resolution, Signal-to-Noise Ratio.
PCM1681PWPR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
PCM1681QPWPR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
PCM1681PWP Maksimum Değerlendirmeler & Elektriksel Özellikler
| Number of DAC Channels | 8 channels |
| Çözünürlük | 24 bits |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 105 dB |
| Digital Audio Interface | I2S and TDM |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Process Technology | CMOS |
| İşletim Sıcaklığı Aralığı | -40 °C to +85 °C |
| Paket | 28-pin HTSSOP PowerPAD (PWP) |
| Pin Sayısı | 28 pins |
| Montaj Türü | Surface mount |
PCM1681PWP 28-pin htssop powerpad (pwp) Pin Yapısı Kılavuzu
PCM1681PWP (28-pin htssop powerpad (pwp) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PCM1681PWP.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PCM1681PWP için uygundur 6 uygulamas: Surround-Sound Home Theater Receiver, Professional Digital Mixing Console, Automotive Infotainment Audio System, Digital Television Audio Output, Network Audio Player and Streamer, High-Resolution USB Audio Interface.
Surround-Sound Home Theater Receiver
The PCM1681PWP fits a surround-sound receiver because it combines eight DAC channels with 24-bit resolution and a 192 kHz maximum sampling rate in one 28-pin HTSSOP PowerPAD device. Its TDM interface can carry synchronized multichannel audio while limiting the number of data and clock connections required between the source and converter. The 105 dB SNR supports low-noise playback, while the converter’s enhanced multilevel delta-sigma architecture provides tolerance to clock jitter. During layout, keep the TDM clock and data routes short, reference the analog ground network carefully, and follow the manufacturer PowerPAD land pattern to prevent thermal or grounding problems from limiting eight-channel performance.
Önerilen
Professional Digital Mixing Console
The PCM1681PWP is suitable for a professional digital mixer requiring multiple synchronized analog audio outputs from a digital engine. Eight 24-bit channels can serve as playback or monitoring DAC sections, and the 192 kHz capability accommodates high-resolution multichannel workflows. I2S provides a familiar serial-audio path for designs requiring conventional framing, while TDM supports wider channel serialization when the mixer architecture benefits from fewer interconnects. For implementation, verify the converter’s channel-slot requirements, clock source, digital input levels, and analog output integration against the manufacturer interface and application information before freezing the control-board layout.
Önerilen
Automotive Infotainment Audio System
PCM1681PWP can support an automotive infotainment audio subsystem that requires eight digital-to-analog channels for a multi-zone or multi-speaker architecture. Its 24-bit conversion, 105 dB SNR, and 192 kHz sampling rate provide the stated performance class for high-quality in-vehicle audio. TDM mode is especially relevant when reducing the number of routed digital signals between the audio processor and DAC. Automotive qualification requirements must still be checked for the exact ordering code, and the PCB must address ground noise, thermal loading, vibration, and connector-related ESD rather than assuming consumer-audio layout practices are sufficient.
Önerilen
Digital Television Audio Output
The PCM1681PWP is appropriate for digital television equipment requiring several synchronized audio outputs. Eight 24-bit DAC channels provide a practical way to generate analog audio from digital broadcast or processing pipelines, while the 192 kHz rate accommodates high-resolution content paths. I2S or TDM operation can be selected according to the television audio processor and channel-slot architecture. Board designers should confirm supported input rates, required digital voltage levels, output filtering, and mute behavior in the manufacturer datasheet, then provide low-impedance analog paths and effective decoupling at the converter supplies.
Önerilen
Network Audio Player and Streamer
PCM1681PWP can serve as the multichannel output stage of a network audio player or streamer that accepts high-resolution digital audio and produces analog line outputs. The eight-channel arrangement is useful for multi-zone playback, while 24-bit resolution and 105 dB SNR support low-noise consumer and professional listening. The converter’s enhanced multilevel delta-sigma architecture and stated clock-jitter tolerance are particularly relevant when the network audio clock is recovered upstream. Designers should nevertheless optimize the master and serial clocks, isolate digital return currents, and validate the analog output network so that the converter’s dynamic range is not limited by the surrounding board.
Önerilen
High-Resolution USB Audio Interface
The PCM1681PWP is suitable for a high-resolution USB audio interface requiring multiple balanced or unbalanced analog outputs. A USB audio controller can stream 24-bit audio to the converter, and the PCM1681PWP supplies eight DAC channels with a maximum sampling rate of 192 kHz. TDM mode can simplify synchronization when the digital audio engine already uses a slot-oriented frame, while I2S supports designs based on conventional stereo framing. Achieving full performance depends on a low-jitter clock, correct data alignment, clean power rails, and output circuitry matched to the intended line-level interface, all of which should be validated against the manufacturer reference design.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PCM1681PWP — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PCM1681PWPR | PCM1681QPWPR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin HTSSOP PowerPAD (PWP) | 28-pin HTSSOP PowerPAD (PWP) | 28-pin HTSSOP PowerPAD (PWP) |
| Number of DAC Channels | 8 channels | 8 channels | 8 channels |
| Resolution | 24 bits | 24 bits | 24 bits |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 105 dB | 105 dB | 105 dB |
| Digital Audio Interface | I2S and TDM | I2S and TDM | I2S and TDM |
| Converter Architecture | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma |
Ana Farklılayıcılar
- Eight-channel integration reduces the number of separate converter packages (karşılaştırma:PCM1681PWPR)
- Wide multichannel interface flexibility (karşılaştırma:PCM1681QPWPR)
- Designed for high-resolution low-noise audio conversion (karşılaştırma:PCM1681PWPR)
Tasarım Notları
Route the serial data, bit clock, and system clock as short, continuous signals, using the manufacturer interface guidance for topology and termination. Keep switching-clock nodes away from the analog input and output sections, and avoid routing digital return currents beneath sensitive analog circuitry. The PCM1681PWP uses enhanced multilevel delta-sigma conversion, but the board still needs a low-jitter clock and controlled ground return to preserve the stated 105 dB SNR and 192 kHz capability.
Implement the exposed PowerPAD with the manufacturer-recommended via pattern and continuous copper where board area permits. The pad is intended to conduct heat away from the IC, so solder-mask and assembly-process constraints must be reviewed before release. For eight continuously active channels, verify the converter dissipation at the intended supply voltage and sampling rate, then estimate junction temperature using the actual PCB thermal resistance rather than relying only on the package outline.
Do not assume I2S and TDM use interchangeable framing. Confirm channel-slot count, data alignment, left/right justification, master-versus-slave clocking, and the required audio rate against the manufacturer interface tables. Also verify digital input levels and analog output requirements before committing to the PCB. A connector marked TDM can still require bit reversal, slot shifting, or a specific frame format that will not function if the software configuration is inconsistent.
Separate analog and digital return-current paths carefully and place power-decoupling capacitors at the pins identified in the manufacturer application information. Keep analog output routing short, maintain symmetry between complementary outputs when applicable, and avoid sharing narrow return paths with high-current amplifier stages. Because the device offers 105 dB SNR, the output network should use stable reference planes, controlled loading, and components selected for the intended audio bandwidth and distortion goals.
Uyumluluk Bilgisi
The standard PCM1681PWP ordering code is not identified as an automotive-qualified configuration in the available manufacturer records. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.