Texas Instruments

PCM1681PWP - 8-Channel 24-Bit 192kHz Audio DAC | TI

MPN: PCM1681PWP ✓ פעיל
28-pin HTSSOP PowerPAD (PWP) Package
כמות הזמנה מינימלית: 1 |

PCM1681PWP סקירה

The Texas Instruments PCM1681PWP is an 8-channel, 24-bit audio digital-to-analog converter with a maximum sampling rate of 192 kHz and 105 dB signal-to-noise ratio, housed in a 28-pin HTSSOP PowerPAD package. It supports I2S and TDM audio interfaces and is designed for multichannel audio systems requiring eight synchronized DAC channels in one compact device.

An audio DAC is a signal-conversion component that converts digital audio samples into analog voltages suitable for amplification, mixing, line-level processing, or loudspeaker drive stages. Within the broader product hierarchy, the PCM1681PWP is an audio DAC, a digital-to-analog converter, a data-conversion IC, and ultimately a semiconductor designed for professional and consumer audio signal paths.

The device provides eight 24-bit conversion channels, 192 kHz sampling capability, and 105 dB SNR. Its I2S interface supports conventional stereo-oriented serial audio arrangements, while TDM mode expands the serial data path for multichannel configurations. The 28-lead HTSSOP PowerPAD package integrates the converter and support circuitry into a surface-mount footprint while providing a thermal pad for improved heat dissipation.

Texas Instruments describes the PCM1681 as a CMOS monolithic integrated circuit using Burr-Brown enhanced multilevel delta-sigma architecture. This architecture provides high-resolution conversion and high tolerance to clock jitter. The manufacturer also identifies I2S and TDM operation, making the device suitable for systems that require flexible channel serialization and synchronized multichannel playback.

Typical uses include surround-sound audio receivers, multichannel home-theater equipment, professional mixers, digital television systems, automotive infotainment platforms, and other audio products requiring eight DAC channels. The 192 kHz rate supports high-resolution audio streams, while the 105 dB SNR specification is appropriate for low-noise playback and signal-chain designs.

PCB implementation should prioritize short, impedance-controlled serial-data and clock routes, solid analog grounding, and correct decoupling around the power terminals. The exposed thermal pad requires a manufacturer-compatible land pattern and adequate copper area because sustained conversion activity can dissipate heat. Audio clocks should be clean and jitter-resistant to preserve the benefit of the converter architecture.

This page organizes the exact PCM1681PWP ordering information, package details, interface capabilities, engineering considerations, and same-family replacement choices into one practical reference. It also distinguishes documented functions from parameters that still require confirmation from the manufacturer datasheet, helping engineers plan sourcing and circuit reviews without overlooking footprint or timing constraints.

חלופות תחליף ישיר עבור PCM1681PWP — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM1681PWP (אותו גורם צורה וטביעת רגל) — שונים ב Digital Audio Interface, Package, Number of DAC Channels, Resolution, Signal-to-Noise Ratio.

Texas Instruments
Digital Audio Interface: I2S serial interface
Package: 20-pin SSOP
Resolution: 24 bit
השווה עם PCM1681PWP →
Texas Instruments
Digital Audio Interface: I2S
Package: 20-lead SSOP, 5.30 mm width
Number of DAC Channels: 6 channels

PCM1681PWPR

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin HTSSOP PowerPAD (PWP)
Same 8-channel, 24-bit, 192 kHz converter family and 28-pin HTSSOP PowerPAD package; ordering suffix differs by 0% in stated key performance

📋 חלופה להתייחסות (לא בקטלוג)

PCM1681QPWPR

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin HTSSOP PowerPAD (PWP)
Automotive-qualified same-family configuration with the same 8-channel, 24-bit, 192 kHz conversion specifications and package; qualification suffix differs

📋 חלופה להתייחסות (לא בקטלוג)

PCM1681PWP דירוגים מרביים ומאפיינים חשמליים

Number of DAC Channels 8 channels
רזולוציה 24 bits
Maximum Sampling Rate 192 kHz
Signal-to-Noise Ratio 105 dB
Digital Audio Interface I2S and TDM
Converter Architecture Enhanced multilevel delta-sigma
Process Technology CMOS
טווח טמפרטורת פעולה -40 °C to +85 °C
מארז 28-pin HTSSOP PowerPAD (PWP)
מספר פינים 28 pins
סוג הרכבה Surface mount

מדריך תצורת פינים של PCM1681PWP 28-pin htssop powerpad (pwp)

תצורת פינים עבור PCM1681PWP (מארזת 28-pin htssop powerpad (pwp)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-pin htssop powerpad (pwp) עבור PCM1681PWP

אין נתוני פריסת פינים מפורטים עבור PCM1681PWP.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM1681PWP מתאים עבור 6 יישוםs: Surround-Sound Home Theater Receiver, Professional Digital Mixing Console, Automotive Infotainment Audio System, Digital Television Audio Output, Network Audio Player and Streamer, High-Resolution USB Audio Interface.

🎧

Surround-Sound Home Theater Receiver

The PCM1681PWP fits a surround-sound receiver because it combines eight DAC channels with 24-bit resolution and a 192 kHz maximum sampling rate in one 28-pin HTSSOP PowerPAD device. Its TDM interface can carry synchronized multichannel audio while limiting the number of data and clock connections required between the source and converter. The 105 dB SNR supports low-noise playback, while the converter’s enhanced multilevel delta-sigma architecture provides tolerance to clock jitter. During layout, keep the TDM clock and data routes short, reference the analog ground network carefully, and follow the manufacturer PowerPAD land pattern to prevent thermal or grounding problems from limiting eight-channel performance.

🏭

Professional Digital Mixing Console

The PCM1681PWP is suitable for a professional digital mixer requiring multiple synchronized analog audio outputs from a digital engine. Eight 24-bit channels can serve as playback or monitoring DAC sections, and the 192 kHz capability accommodates high-resolution multichannel workflows. I2S provides a familiar serial-audio path for designs requiring conventional framing, while TDM supports wider channel serialization when the mixer architecture benefits from fewer interconnects. For implementation, verify the converter’s channel-slot requirements, clock source, digital input levels, and analog output integration against the manufacturer interface and application information before freezing the control-board layout.

🚗

Automotive Infotainment Audio System

PCM1681PWP can support an automotive infotainment audio subsystem that requires eight digital-to-analog channels for a multi-zone or multi-speaker architecture. Its 24-bit conversion, 105 dB SNR, and 192 kHz sampling rate provide the stated performance class for high-quality in-vehicle audio. TDM mode is especially relevant when reducing the number of routed digital signals between the audio processor and DAC. Automotive qualification requirements must still be checked for the exact ordering code, and the PCB must address ground noise, thermal loading, vibration, and connector-related ESD rather than assuming consumer-audio layout practices are sufficient.

📺

Digital Television Audio Output

The PCM1681PWP is appropriate for digital television equipment requiring several synchronized audio outputs. Eight 24-bit DAC channels provide a practical way to generate analog audio from digital broadcast or processing pipelines, while the 192 kHz rate accommodates high-resolution content paths. I2S or TDM operation can be selected according to the television audio processor and channel-slot architecture. Board designers should confirm supported input rates, required digital voltage levels, output filtering, and mute behavior in the manufacturer datasheet, then provide low-impedance analog paths and effective decoupling at the converter supplies.

🌐

Network Audio Player and Streamer

PCM1681PWP can serve as the multichannel output stage of a network audio player or streamer that accepts high-resolution digital audio and produces analog line outputs. The eight-channel arrangement is useful for multi-zone playback, while 24-bit resolution and 105 dB SNR support low-noise consumer and professional listening. The converter’s enhanced multilevel delta-sigma architecture and stated clock-jitter tolerance are particularly relevant when the network audio clock is recovered upstream. Designers should nevertheless optimize the master and serial clocks, isolate digital return currents, and validate the analog output network so that the converter’s dynamic range is not limited by the surrounding board.

🖥️

High-Resolution USB Audio Interface

The PCM1681PWP is suitable for a high-resolution USB audio interface requiring multiple balanced or unbalanced analog outputs. A USB audio controller can stream 24-bit audio to the converter, and the PCM1681PWP supplies eight DAC channels with a maximum sampling rate of 192 kHz. TDM mode can simplify synchronization when the digital audio engine already uses a slot-oriented frame, while I2S supports designs based on conventional stereo framing. Achieving full performance depends on a low-jitter clock, correct data alignment, clean power rails, and output circuitry matched to the intended line-level interface, all of which should be validated against the manufacturer reference design.

סיכום מוצרים מומלצים

PCM1681PWPR Same-family ordering option for the eight-channel converter בשימוש ב-: Surround-Sound Home Theater Receiver, Professional Digital Mixing Console, Automotive Infotainment Audio System, Digital Television Audio Output, Network Audio Player and Streamer, High-Resolution USB Audio Interface PCM1681QPWPR Automotive-qualified same-family converter option בשימוש ב-: Surround-Sound Home Theater Receiver, Professional Digital Mixing Console, Automotive Infotainment Audio System, Digital Television Audio Output, Network Audio Player and Streamer, High-Resolution USB Audio Interface
What is the PCM1681PWP?
The PCM1681PWP is an eight-channel, 24-bit audio DAC from Texas Instruments that supports sampling rates up to 192 kHz and provides a signal-to-noise ratio of 105 dB. According to the manufacturer datasheet, it is a CMOS monolithic device using enhanced multilevel delta-sigma architecture, with I2S and TDM digital audio interfaces in a 28-pin HTSSOP PowerPAD package.
How many audio channels does PCM1681PWP support?
The PCM1681PWP supports eight audio DAC channels, with each channel providing 24-bit resolution. Texas Instruments describes the device as an eight-channel audio DAC in its product information and manufacturer datasheet. The eight-channel architecture consolidates multichannel conversion into one 28-pin HTSSOP PowerPAD package, reducing the number of separate DAC packages required in a synchronized audio system.
What is the maximum sampling rate of PCM1681PWP?
The PCM1681PWP supports a maximum sampling rate of 192 kHz with 24-bit audio data. The manufacturer product page identifies the device as an 8-channel, 24-bit, 192 kHz audio DAC, while the manufacturer datasheet describes it as a 24-bit, 192-kHz sampling converter. Its I2S and TDM interfaces allow the digital stream to be organized for different multichannel playback architectures.
What is the signal-to-noise ratio of PCM1681PWP?
The PCM1681PWP has a specified signal-to-noise ratio of 105 dB. This figure appears in the Texas Instruments product description and identifies the converter’s low-noise performance for high-resolution audio applications. The manufacturer also emphasizes enhanced multilevel delta-sigma architecture and high tolerance to clock jitter, both of which are relevant when maintaining signal integrity in a multichannel digital audio path.
Does PCM1681PWP support both I2S and TDM?
The PCM1681PWP supports I2S and TDM audio interfaces. The Texas Instruments product page explicitly identifies TDM mode, and distributor catalog information identifies I2S for this ordering code. I2S is useful for conventional digital audio links, while TDM provides a wider serialized channel arrangement for eight-channel synchronization. Confirm timing, data alignment, and slot assignments against the manufacturer interface tables before PCB implementation.
What package does PCM1681PWP use?
The PCM1681PWP uses a 28-pin HTSSOP PowerPAD package, also identified by ordering code PWP. Texas Instruments lists the device in a 28-pin HTSSOP package with an operating range of -40 °C to +85 °C. The PowerPAD should be connected and laid out according to the manufacturer land-pattern guidance because it provides the primary thermal conduction path from the device.
Where can I download the PCM1681PWP datasheet PDF?
The official PCM1681PWP datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer document is titled for the PCM1681 24-bit, 192-kHz enhanced multilevel delta-sigma converter and includes device descriptions, package information, and interface details. Use the manufacturer PDF as the controlling document for pin assignments, electrical limits, application circuitry, and PCB recommendations.
Where can I find the PCM1681PWP pinout?
The PCM1681PWP pinout is found in the pin-configuration section of the official Texas Instruments PCM1681 datasheet. The package is a 28-lead HTSSOP PowerPAD, and engineers should use the pin-description table and land-pattern diagram together because the exposed pad is a thermal connection rather than a conventional signal pin. Assign PCB tracks only from those manufacturer tables to avoid incorrect digital, analog, clock, or power connections.
Can PCM1681PWPR replace PCM1681PWP?
PCM1681PWPR is a same-family ordering option that uses the same 28-pin HTSSOP PowerPAD device configuration as PCM1681PWP, with the principal difference being the manufacturer ordering suffix. The manufacturer family information supports their common converter architecture and package. Confirm the exact suffix mechanics, reel configuration, and any marking differences in the ordering information before treating either version as a production replacement.
What is the best drop-in replacement for PCM1681PWP?
PCM1681PWPR is the closest documented same-family drop-in choice because it belongs to the PCM1681 device family and uses the 28-pin HTSSOP PowerPAD package. The documented change is the ordering suffix rather than the converter’s channel count, resolution, or 192 kHz sampling capability. No cross-brand drop-in alternative was established by the available manufacturer and distributor records, so a replacement should not be approved without package and interface verification.
When should I choose PCM1681PWP over PCM1681PWPR?
Choose PCM1681PWP when its documented ordering code and delivery form match the product requirements; choose PCM1681PWPR when that suffix better matches the intended production or reel configuration. Both parts are associated with the same eight-channel, 24-bit PCM1681 converter family and 28-pin HTSSOP PowerPAD package. For new PCB work, the decisive factors are orderable configuration, traceability, and procurement rather than a change in the stated conversion performance.
Is PCM1681PWP suitable for a surround-sound receiver?
The PCM1681PWP is suitable for a surround-sound receiver requiring eight synchronized DAC channels. Its eight-channel architecture, 24-bit resolution, 192 kHz maximum sampling rate, and 105 dB SNR align directly with multichannel home-theater playback, while TDM mode supports a compact serialized multichannel data path. Clock quality, ground partitioning, output integration, and thermal performance still require validation in the complete receiver design.
Is there a cross-brand equivalent for PCM1681PWP?
No cross-brand drop-in equivalent is confirmed for the PCM1681PWP in the available manufacturer and distributor records. A valid substitute must match the 28-pin HTSSOP PowerPAD footprint, eight-channel 24-bit architecture, 192 kHz class sampling rate, I2S and TDM behavior, pin functions, and supply requirements. Use the manufacturer cross-reference and interface documentation to qualify any candidate rather than treating a generic eight-channel DAC as interchangeable.
Where can I buy PCM1681PWP and what is its lead time?
PCM1681PWP can be requested through the Request a Quote form on this page, where the current commercial terms, stock position, minimum order quantity, and lead time should be confirmed. The manufacturer identifies PCM1681PWP as an orderable 28-pin HTSSOP PowerPAD configuration. Because availability and lead time can vary by order quantity and purchasing channel, request a current quotation rather than relying on a historical catalog record.
What are the key specifications of PCM1681PWP that engineers should know?
The key PCM1681PWP specifications are eight DAC channels, 24-bit resolution, a 192 kHz maximum sampling rate, 105 dB SNR, and I2S plus TDM digital interfaces. The Texas Instruments manufacturer datasheet also identifies a CMOS monolithic implementation using enhanced multilevel delta-sigma architecture. The device operates from -40 °C to +85 °C and uses a 28-pin HTSSOP PowerPAD package for surface-mount multichannel audio conversion.

נתוני עזר הנדסיים עבור PCM1681PWP — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM1681PWP when the design requires eight synchronized 24-bit DAC channels, I2S or TDM connectivity, a maximum sampling rate of 192 kHz, and the 28-pin HTSSOP PowerPAD footprint. Choose PCM1681PWPR when the same converter performance and package are needed but the alternative ordering suffix better matches the intended production configuration. Choose PCM1681QPWPR when an automotive-qualified member of the same family is required and its exact qualification conditions satisfy the application. Do not select a generic cross-brand DAC merely because it also offers eight channels: the digital framing, clocking, pin functions, supply levels, analog outputs, and package dimensions must match before the part can be considered a true drop-in replacement. For new designs, confirm interface timing, thermal performance, and analog integration using the official manufacturer datasheet.

השוואה עם חלופות

פרמטר מוצר זה PCM1681PWPR PCM1681QPWPR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin HTSSOP PowerPAD (PWP) 28-pin HTSSOP PowerPAD (PWP) 28-pin HTSSOP PowerPAD (PWP)
Number of DAC Channels 8 channels 8 channels 8 channels
Resolution 24 bits 24 bits 24 bits
Maximum Sampling Rate 192 kHz 192 kHz 192 kHz
Signal-to-Noise Ratio 105 dB 105 dB 105 dB
Digital Audio Interface I2S and TDM I2S and TDM I2S and TDM
Converter Architecture Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma

מבדילים עיקריים

  • Eight-channel integration reduces the number of separate converter packages (לעומתPCM1681PWPR)
  • Wide multichannel interface flexibility (לעומתPCM1681QPWPR)
  • Designed for high-resolution low-noise audio conversion (לעומתPCM1681PWPR)

הערות תכנון

Route the serial data, bit clock, and system clock as short, continuous signals, using the manufacturer interface guidance for topology and termination. Keep switching-clock nodes away from the analog input and output sections, and avoid routing digital return currents beneath sensitive analog circuitry. The PCM1681PWP uses enhanced multilevel delta-sigma conversion, but the board still needs a low-jitter clock and controlled ground return to preserve the stated 105 dB SNR and 192 kHz capability.

Implement the exposed PowerPAD with the manufacturer-recommended via pattern and continuous copper where board area permits. The pad is intended to conduct heat away from the IC, so solder-mask and assembly-process constraints must be reviewed before release. For eight continuously active channels, verify the converter dissipation at the intended supply voltage and sampling rate, then estimate junction temperature using the actual PCB thermal resistance rather than relying only on the package outline.

Do not assume I2S and TDM use interchangeable framing. Confirm channel-slot count, data alignment, left/right justification, master-versus-slave clocking, and the required audio rate against the manufacturer interface tables. Also verify digital input levels and analog output requirements before committing to the PCB. A connector marked TDM can still require bit reversal, slot shifting, or a specific frame format that will not function if the software configuration is inconsistent.

Separate analog and digital return-current paths carefully and place power-decoupling capacitors at the pins identified in the manufacturer application information. Keep analog output routing short, maintain symmetry between complementary outputs when applicable, and avoid sharing narrow return paths with high-current amplifier stages. Because the device offers 105 dB SNR, the output network should use stable reference planes, controlled loading, and components selected for the intended audio bandwidth and distortion goals.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The standard PCM1681PWP ordering code is not identified as an automotive-qualified configuration in the available manufacturer records. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

PCM1681PWP datasheet PCM1681PWP pinout PCM1681PWP datasheet pdf PCM1681PWP equivalent PCM1681PWP replacement PCM1681PWP cross reference PCM1681PWP vs PCM1681PWPR Texas Instruments PCM1681PWP PCM1681PWP price PCM1681PWP stock PCM1681 8 channel audio DAC PCM1681PWP HTSSOP-28 PCM1681PWP application circuit PCM1681PWP TDM interface

רכיבים ומונחים קשורים

Texas Instruments PCM1681PWP PCM1681PWPR PCM1681QPWPR PCM1681 Audio DAC Digital-to-Analog Converter Data Conversion IC Semiconductor Burr-Brown Enhanced Multilevel Delta-Sigma Delta-Sigma Modulator I2S TDM 24-bit Resolution 192 kHz Sampling Rate 105 dB SNR Signal-to-Noise Ratio Clock Jitter Tolerance HTSSOP-28 PowerPAD CMOS Surround-Sound Receiver Professional Audio Mixing Console Automotive Infotainment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר