PCM1681PWP - 8-Channel 24-Bit 192kHz Audio DAC | TI
부품 번호: PCM1681PWP ✓ 활성PCM1681PWP 개요
An audio DAC is a signal-conversion component that converts digital audio samples into analog voltages suitable for amplification, mixing, line-level processing, or loudspeaker drive stages. Within the broader product hierarchy, the PCM1681PWP is an audio DAC, a digital-to-analog converter, a data-conversion IC, and ultimately a semiconductor designed for professional and consumer audio signal paths.
The device provides eight 24-bit conversion channels, 192 kHz sampling capability, and 105 dB SNR. Its I2S interface supports conventional stereo-oriented serial audio arrangements, while TDM mode expands the serial data path for multichannel configurations. The 28-lead HTSSOP PowerPAD package integrates the converter and support circuitry into a surface-mount footprint while providing a thermal pad for improved heat dissipation.
Texas Instruments describes the PCM1681 as a CMOS monolithic integrated circuit using Burr-Brown enhanced multilevel delta-sigma architecture. This architecture provides high-resolution conversion and high tolerance to clock jitter. The manufacturer also identifies I2S and TDM operation, making the device suitable for systems that require flexible channel serialization and synchronized multichannel playback.
Typical uses include surround-sound audio receivers, multichannel home-theater equipment, professional mixers, digital television systems, automotive infotainment platforms, and other audio products requiring eight DAC channels. The 192 kHz rate supports high-resolution audio streams, while the 105 dB SNR specification is appropriate for low-noise playback and signal-chain designs.
PCB implementation should prioritize short, impedance-controlled serial-data and clock routes, solid analog grounding, and correct decoupling around the power terminals. The exposed thermal pad requires a manufacturer-compatible land pattern and adequate copper area because sustained conversion activity can dissipate heat. Audio clocks should be clean and jitter-resistant to preserve the benefit of the converter architecture.
This page organizes the exact PCM1681PWP ordering information, package details, interface capabilities, engineering considerations, and same-family replacement choices into one practical reference. It also distinguishes documented functions from parameters that still require confirmation from the manufacturer datasheet, helping engineers plan sourcing and circuit reviews without overlooking footprint or timing constraints.
드롭인 대체품: PCM1681PWP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PCM1681PWP (동일 폼 팩터 및 풋프린트) — 차이점: Digital Audio Interface, Package, Number of DAC Channels, Resolution, Signal-to-Noise Ratio.
PCM1681PWPR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PCM1681QPWPR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PCM1681PWP 최대 정격 & 전기적 특성
| Number of DAC Channels | 8 channels |
| 분해능 | 24 bits |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 105 dB |
| Digital Audio Interface | I2S and TDM |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Process Technology | CMOS |
| 동작 온도 범위 | -40 °C to +85 °C |
| 패키지 | 28-pin HTSSOP PowerPAD (PWP) |
| 핀 수 | 28 pins |
| 실장 유형 | Surface mount |
PCM1681PWP 28-pin htssop powerpad (pwp) 핀 구성 가이드
PCM1681PWP(28-pin htssop powerpad (pwp) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PCM1681PWP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PCM1681PWP 적합 용도: 6 애플리케이션s: Surround-Sound Home Theater Receiver, Professional Digital Mixing Console, Automotive Infotainment Audio System, Digital Television Audio Output, Network Audio Player and Streamer, High-Resolution USB Audio Interface.
Surround-Sound Home Theater Receiver
The PCM1681PWP fits a surround-sound receiver because it combines eight DAC channels with 24-bit resolution and a 192 kHz maximum sampling rate in one 28-pin HTSSOP PowerPAD device. Its TDM interface can carry synchronized multichannel audio while limiting the number of data and clock connections required between the source and converter. The 105 dB SNR supports low-noise playback, while the converter’s enhanced multilevel delta-sigma architecture provides tolerance to clock jitter. During layout, keep the TDM clock and data routes short, reference the analog ground network carefully, and follow the manufacturer PowerPAD land pattern to prevent thermal or grounding problems from limiting eight-channel performance.
추천
Professional Digital Mixing Console
The PCM1681PWP is suitable for a professional digital mixer requiring multiple synchronized analog audio outputs from a digital engine. Eight 24-bit channels can serve as playback or monitoring DAC sections, and the 192 kHz capability accommodates high-resolution multichannel workflows. I2S provides a familiar serial-audio path for designs requiring conventional framing, while TDM supports wider channel serialization when the mixer architecture benefits from fewer interconnects. For implementation, verify the converter’s channel-slot requirements, clock source, digital input levels, and analog output integration against the manufacturer interface and application information before freezing the control-board layout.
추천
Automotive Infotainment Audio System
PCM1681PWP can support an automotive infotainment audio subsystem that requires eight digital-to-analog channels for a multi-zone or multi-speaker architecture. Its 24-bit conversion, 105 dB SNR, and 192 kHz sampling rate provide the stated performance class for high-quality in-vehicle audio. TDM mode is especially relevant when reducing the number of routed digital signals between the audio processor and DAC. Automotive qualification requirements must still be checked for the exact ordering code, and the PCB must address ground noise, thermal loading, vibration, and connector-related ESD rather than assuming consumer-audio layout practices are sufficient.
추천
Digital Television Audio Output
The PCM1681PWP is appropriate for digital television equipment requiring several synchronized audio outputs. Eight 24-bit DAC channels provide a practical way to generate analog audio from digital broadcast or processing pipelines, while the 192 kHz rate accommodates high-resolution content paths. I2S or TDM operation can be selected according to the television audio processor and channel-slot architecture. Board designers should confirm supported input rates, required digital voltage levels, output filtering, and mute behavior in the manufacturer datasheet, then provide low-impedance analog paths and effective decoupling at the converter supplies.
추천
Network Audio Player and Streamer
PCM1681PWP can serve as the multichannel output stage of a network audio player or streamer that accepts high-resolution digital audio and produces analog line outputs. The eight-channel arrangement is useful for multi-zone playback, while 24-bit resolution and 105 dB SNR support low-noise consumer and professional listening. The converter’s enhanced multilevel delta-sigma architecture and stated clock-jitter tolerance are particularly relevant when the network audio clock is recovered upstream. Designers should nevertheless optimize the master and serial clocks, isolate digital return currents, and validate the analog output network so that the converter’s dynamic range is not limited by the surrounding board.
추천
High-Resolution USB Audio Interface
The PCM1681PWP is suitable for a high-resolution USB audio interface requiring multiple balanced or unbalanced analog outputs. A USB audio controller can stream 24-bit audio to the converter, and the PCM1681PWP supplies eight DAC channels with a maximum sampling rate of 192 kHz. TDM mode can simplify synchronization when the digital audio engine already uses a slot-oriented frame, while I2S supports designs based on conventional stereo framing. Achieving full performance depends on a low-jitter clock, correct data alignment, clean power rails, and output circuitry matched to the intended line-level interface, all of which should be validated against the manufacturer reference design.
추천
추천 제품 요약
엔지니어링 참조 데이터: PCM1681PWP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PCM1681PWPR | PCM1681QPWPR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin HTSSOP PowerPAD (PWP) | 28-pin HTSSOP PowerPAD (PWP) | 28-pin HTSSOP PowerPAD (PWP) |
| Number of DAC Channels | 8 channels | 8 channels | 8 channels |
| Resolution | 24 bits | 24 bits | 24 bits |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 105 dB | 105 dB | 105 dB |
| Digital Audio Interface | I2S and TDM | I2S and TDM | I2S and TDM |
| Converter Architecture | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma |
주요 차별점
- Eight-channel integration reduces the number of separate converter packages (vs PCM1681PWPR)
- Wide multichannel interface flexibility (vs PCM1681QPWPR)
- Designed for high-resolution low-noise audio conversion (vs PCM1681PWPR)
설계 노트
Route the serial data, bit clock, and system clock as short, continuous signals, using the manufacturer interface guidance for topology and termination. Keep switching-clock nodes away from the analog input and output sections, and avoid routing digital return currents beneath sensitive analog circuitry. The PCM1681PWP uses enhanced multilevel delta-sigma conversion, but the board still needs a low-jitter clock and controlled ground return to preserve the stated 105 dB SNR and 192 kHz capability.
Implement the exposed PowerPAD with the manufacturer-recommended via pattern and continuous copper where board area permits. The pad is intended to conduct heat away from the IC, so solder-mask and assembly-process constraints must be reviewed before release. For eight continuously active channels, verify the converter dissipation at the intended supply voltage and sampling rate, then estimate junction temperature using the actual PCB thermal resistance rather than relying only on the package outline.
Do not assume I2S and TDM use interchangeable framing. Confirm channel-slot count, data alignment, left/right justification, master-versus-slave clocking, and the required audio rate against the manufacturer interface tables. Also verify digital input levels and analog output requirements before committing to the PCB. A connector marked TDM can still require bit reversal, slot shifting, or a specific frame format that will not function if the software configuration is inconsistent.
Separate analog and digital return-current paths carefully and place power-decoupling capacitors at the pins identified in the manufacturer application information. Keep analog output routing short, maintain symmetry between complementary outputs when applicable, and avoid sharing narrow return paths with high-current amplifier stages. Because the device offers 105 dB SNR, the output network should use stable reference planes, controlled loading, and components selected for the intended audio bandwidth and distortion goals.
규정 준수 정보
The standard PCM1681PWP ordering code is not identified as an automotive-qualified configuration in the available manufacturer records. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.