PIC32MZ0512EFE124-E/TL - 32-bit MCU 200MHz 512KB Flash 124-VTLA | Microchip
MPN: PIC32MZ0512EFE124-E/TL ✓ AktifPIC32MZ0512EFE124-E/TL Genel Bakış
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers) into a single device. The PIC32MZ EF family sits at the top of the PIC32 hierarchy and is engineered for high-performance embedded applications requiring both connectivity and rich analog/mixed-signal integration.
Key features include a 200 MHz / 330 DMIPS core with 252 MHz headroom in the family, 512 KB Flash with Dual Panel Live Update, 128 KB SRAM, Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC with IEEE 1588 PTP support, Serial Quad Interface (SQI) for external flash, up to 97 I/O lines, multiple 12-bit ADC and DAC channels, DMA controllers, and PWM peripherals suited for motor control. The VTLA-124 (9x9 mm) laminate package exposes a large die-attach pad for low thermal resistance in space-constrained designs.
Architecturally, the device combines a 5-stage MIPS pipeline with tightly-coupled SRAM, hardware multiply-accumulate DSP extensions, and dedicated peripherals (USB, ENET, SQI, CAN, I2S) that offload the CPU. This balanced compute-and-connectivity integration eliminates the need for an external PHY or bus-marshalling CPLD in many designs.
Typical applications include industrial automation, automotive connectivity gateways, IoT edge nodes, HMI/graphics terminals, audio processing with I2S/USB streaming, and motor control. The wide peripheral mix supports HMI + connectivity + analog sensing on a single chip.
Designers should verify the Live Update dual-panel firmware sequence in MPLAB Harmony before field deployment and budget sufficient PCB copper under the exposed pad to honor thermal limits at high MIPS loads.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in alternatifler için PIC32MZ0512EFE124-E/TL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC32MZ0512EFE124-E/TL (aynı form faktörü ve ayağa oturma) — farklı olan FPU, Package, Operating Temperature, Core Architecture, ADC.
PIC32MZ1024EFE124-E/TL
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ0512EFE124-I/TL
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ0512EFE124T-E/TL
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PIC32MZ1024EFE124T-E/TL
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
PIC32MZ0512EFF124-E/TL
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ0512EFE124-E/TL Maksimum Değerlendirmeler & Elektriksel Özellikler
| Core Architecture | MIPS32® M-Class (Warrior M-class) |
| Veri Bus Genişliği | 32-bit |
| Maximum CPU Speed | 200 MHz (252 MHz family max) |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754 single-precision |
| DSP Extensions | 4x 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 128 KB |
| İşletim Sıcaklığı | -40C to +125C (automotive grade) |
| Paket | 124-VTLA (9x9 mm) |
| Montaj Türü | Surface Mount |
| I/O Lines | Up to 97 |
| USB | Hi-Speed USB 2.0 with on-chip PHY |
| Ethernet | 10/100 MAC with IEEE 1588 PTP |
| SQI (Serial Quad Interface) | Yes |
| Crypto Engine | No |
| RoHS Durumu | Compliant |
PIC32MZ0512EFE124-E/TL 124-vtla (9x9 mm) Pin Yapısı Kılavuzu
PIC32MZ0512EFE124-E/TL (124-vtla (9x9 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PIC32MZ0512EFE124-E/TL.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PIC32MZ0512EFE124-E/TL için uygundur 6 uygulamas: Industrial IoT Gateway, Automotive Connectivity Module, HMI / Graphics Terminal, Audio Processing / USB Streaming, BLDC / PMSM Motor Control, Edge Sensor Hub / Wearable.
Industrial IoT Gateway
The PIC32MZ0512EFE124-E/TL fits industrial IoT gateways thanks to its 10/100 Ethernet MAC with IEEE 1588 PTP, Hi-Speed USB 2.0 device/host, and SQI interface for external serial flash. The 200 MHz MIPS M-class core with FPU handles TLS/Modbus/OPC-UA framing plus edge analytics on a single device. The 124-VTLA laminate keeps the footprint small enough for DIN-rail enclosures while exposing up to 97 GPIO for sensor aggregation, RS-485 transceivers, and isolated digital inputs.
Önerilen
Automotive Connectivity Module
The -E suffix denoting -40C to +125C operation and the integrated Hi-Speed USB plus 10/100 Ethernet make this MCU a natural fit for automotive telematics control units (TCUs) and V2X edge nodes. The 330 DMIPS MIPS M-class core runs AUTOSAR MCAL drivers and security stacks at the wire rate, while the Dual Panel Live Update firmware architecture supports fail-safe OTA campaigns required by ISO 26262 functional-safety workflows.
Önerilen
HMI / Graphics Terminal
HMI terminals benefit from the 200 MHz core, parallel display interface (EPI/ PMP), and 128 KB SRAM that drives small TFT-LCDs at 30+ fps. The PIC32MZ EF family integrates dedicated graphics peripherals and the I2S audio block, enabling combined video + audio playback from a single chip. The 124-VTLA package exposes sufficient GPIO for capacitive touch controllers and backlight PWM while remaining under 9x9 mm.
Önerilen
Audio Processing / USB Streaming
Audio DAC/amplifier products use the PIC32MZ0512EFE124-E/TL to bridge Hi-Speed USB audio streaming (UAC2) to I2S codecs. The integrated Hi-Speed USB PHY eliminates an external ULPI chip, and the 200 MHz MIPS core handles SRC and effect DSP via the four 64-bit accumulators. The DMA engine moves audio samples without CPU intervention, freeing MIPS for user DSP algorithms while the FPU accelerates biquad filter calculations.
Önerilen
BLDC / PMSM Motor Control
Field-oriented control of BLDC and PMSM motors demands deterministic PWM generation, fast ADC sampling, and DSP throughput - all delivered by the PIC32MZ0512EFE124-E/TL. The PWM peripheral with complementary outputs and dead-band generation drives three-phase inverters up to 50 kHz switching frequency, while the 12-bit 28 MSPS ADC samples phase currents synchronized to the PWM cycle. The FPU and DSP extensions run Park/Clarke transforms at 200 MHz with sub-microsecond loop latency.
Önerilen
Edge Sensor Hub / Wearable
Wearable sensor hubs use the PIC32MZ0512EFE124-E/TL as the central processor to aggregate IMU, bio-sensor, and BLE radio data through the on-chip I2C/SPI controllers. The 200 MHz core runs always-on sensor fusion while the integrated 10/100 Ethernet (when connected to a docking cradle) offloads data at gigabit rates. The 124-VTLA 9x9 mm package is small enough for wrist-mounted form factors while exposing adequate GPIO for multi-sensor I/O.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC32MZ0512EFE124-E/TL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC32MZ1024EFE124-E/TL | PIC32MZ0512EFE124-I/TL | PIC32MZ0512EFE124T-E/TL | PIC32MZ1024EFE124T-E/TL | PIC32MZ0512EFF124-E/TL |
|---|---|---|---|---|---|---|
| Package | 124-VTLA (9x9 mm) | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 512 KB | 1024 KB | 512 KB | 512 KB | 1024 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Temperature Grade | -40C to +125C (automotive) | -40C to +125C (automotive) | -40C to +85C (industrial) | -40C to +125C (automotive) | -40C to +125C (automotive) | -40C to +125C (automotive) |
| Crypto Engine | No | No | No | No | No | Yes (AES/SHA) |
| Core Speed (max) | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Hi-Speed USB + Ethernet | Yes | Yes | Yes | Yes | Yes | Yes |
Ana Farklılayıcılar
- Dual Panel Live Update firmware architecture (karşılaştırma:PIC32MX795F512LT-80I/PF)
- Hi-Speed USB 2.0 with on-chip PHY (karşılaştırma:PIC32MX795F512LT-80I/PF)
- Higher MIPS density with FPU (karşılaştırma:PIC32MX795F512LT-80I/PF)
Tasarım Notları
The 124-VTLA laminate package dissipates up to approximately 1 W typical when running core benchmarks; the exposed die-attach pad must be soldered to a continuous copper land pattern with an array of thermal vias (recommended 0.3 mm drill, 0.5 mm pitch) to a 2 oz inner-plane copper pour. Without proper thermal attachment the junction temperature will exceed 125 C at +85 C ambient during sustained MIPS workloads. Cross-check with the family datasheet section 35 (Packaging Information) for the exact land pattern dimensions.
Route the Hi-Speed USB D+/D- lines as a 90 ohm differential pair with length matching within 150 mil; keep the on-chip PHY decoupling capacitors (100 nF + 4.7 uF) within 2 mm of the VUSB pin. For Ethernet RMII, match the 50 MHz reference clock trace to within 50 mil of the data lines to minimize jitter. SQI signals require 50 ohm characteristic impedance with a 33 ohm series damping resistor near the MCU.
When using Dual Panel Live Update firmware, ensure the bootloader uses CRC32 verification on each panel before swapping the CPU vector base; failure to do so can brick the device if the inactive panel is corrupted by brown-out during programming. Also note that the -E suffix denotes -40C to +125C automotive grade and the -I suffix denotes -40C to +85C industrial; mixing them in production boards will cause thermal shutdown at high ambient.
Uyumluluk Bilgisi
RoHS and lead-free compliant per Microchip product page. AEC-Q100 qualification not separately listed for this part number though it carries the automotive -E temperature grade; check with Microchip for full automotive PPAP documentation.