STMicroelectronics

STM32F051K6U6 - 48MHz Cortex-M0 MCU | STMicroelectronics

MPN: STM32F051K6U6 ✓ Aktif
2.0 V to 3.6 V Vdss 32-UFQFPN (5 mm x 5 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

STM32F051K6U6 Genel Bakış

STMicroelectronics STM32F051K6U6 is an ARM Cortex-M0 32-bit microcontroller with a maximum operating frequency of 48 MHz, 32 KB of Flash memory organized as 32K x 8, and a 32-pin UFQFPN package measuring 5 mm x 5 mm. It is designed for compact embedded systems that require efficient control, data acquisition, and serial connectivity in a low-pin-count package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output interfaces on one device. The STM32F0 series belongs to the ARM Cortex-M0 class of embedded processors and operates within the broader hierarchy of microcontroller, embedded processor, semiconductor, and electronic control systems. Its compact package and 48 MHz performance make it suitable for cost-sensitive control boards, sensor nodes, and compact instruments.

The device provides 32 KB of Flash memory, an ARM Cortex-M0 core, and a 48 MHz maximum clock frequency. Its advertised peripheral set includes 11 timers, analog-to-digital and digital-to-analog converters, and communication interfaces. A 2.0 V to 3.6 V operating range supports common low-voltage embedded systems, while the 32-UFQFPN package reduces board area compared with larger leaded or fine-pitch MCU packages.

The STM32F051 architecture is organized around a 32-bit Cortex-M0 RISC core and an integrated peripheral set for timing, communication, and signal conversion. Timers support periodic and event-driven control, while ADC and DAC resources permit analog measurements and waveform generation without relying entirely on external converters. Serial interfaces can connect the MCU to sensors, transceivers, human-interface devices, and other embedded controllers.

Typical uses include industrial sensing modules, compact motor-control boards, building automation endpoints, communication transceivers, and low-cost data-acquisition products. The 32-pin package is particularly useful when board space is constrained but the design still requires mixed signal conversion and multiple communication functions rather than a minimal GPIO-only controller.

PCB design should preserve clean supply distribution and controlled return paths around the 5 mm x 5 mm package. Place decoupling capacitors close to the power pins, route sensitive analog signals away from switching nodes, and use the manufacturer pin-description table when assigning tracks. Confirm exposed-pad, programming, and debug connections against the package drawing before releasing the PCB.

This page combines the manufacturer specifications, package-focused engineering guidance, application selection criteria, and a parameter comparison of potential replacements. It also distinguishes true board-level drop-in candidates from related STM32 devices that require different packages or different peripheral assignments.

Drop-in alternatifler için STM32F051K6U6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM32F051K6U6 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Flash Memory, Maximum CPU Frequency, Processor Core.

STMicroelectronics
Package: 32-pin UFQFPN (5x5 mm)
Product Type: 32-bit ARM Cortex-M0 microcontroller
Flash Memory: 32 KB
İle Karşılaştır STM32F051K6U6 →
STMicroelectronics
Package: 32-LQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0 microcontroller
İle Karşılaştır STM32F051K6U6 →
STMicroelectronics
Package: 32-UFQFPN (5 x 5 mm)
Product Type: 32-bit microcontroller
İle Karşılaştır STM32F051K6U6 →
STMicroelectronics
Package: 32-pin UFQFPN (5 x 5 mm)
Product Type: 32-bit mixed-signal microcontroller
Maximum CPU Frequency: 72 MHz
İle Karşılaştır STM32F051K6U6 →

STM32F051K6U7

✅ Yerleştirme
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit microcontroller · STMicroelectronics · ARM Cortex-M0 · 32-bit RISC · 48 MHz · 32 KB (32K x 8) · 32-UFQFPN (5 x 5 mm) · Surface mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32F042K6U6

✅ Yerleştirme
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 48 MHz · 32 KB · 32-bit RISC · 2.5 V/3.3 V · USB · CAN

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32F301K6U7

✅ Yerleştirme
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit mixed-signal microcontroller · Arm Cortex-M4 · 72 MHz · 32-bit RISC · 32 KB (32K x 8) · 16 KB · Integrated · Supported

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32F051K6T6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32 KB (32K x 8) · ARM Cortex-M0 · 32-bit · 2.5 V/3.3 V · 32-LQFP (7 x 7 mm) · 32 pins

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32F051K6U6 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type ARM Cortex-M0 32-bit microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
Supply Voltage Range 2.0 V to 3.6 V
Processor Architecture ARM Cortex-M0, 32-bit RISC
Timer Count 11 timers
Analog Conversion Resources ADC and DAC
Communication Interfaces Serial communication interfaces
Paket 32-UFQFPN (5 mm x 5 mm)
Pin Sayısı 32 pins
Montaj Türü Surface mount
Series STM32F0
Manufacturer Family Flash Range 16 KB to 64 KB

STM32F051K6U6 32-ufqfpn (5 mm x 5 mm) Pin Yapısı Kılavuzu

STM32F051K6U6 (32-ufqfpn (5 mm x 5 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-ufqfpn (5 mm x 5 mm) paket pin çizelgesi için STM32F051K6U6

Ayrıntılı pin çıkış verisi mevcut değil: STM32F051K6U6.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32F051K6U6 için uygundur 6 uygulamas: Compact Industrial Sensor Node, Low-Power Data Acquisition Module, Communication Transceiver Controller, Compact Motor and Relay Controller, Building Automation Endpoint, Portable Instrumentation and Test Equipment.

🏭

Compact Industrial Sensor Node

The STM32F051K6U6 fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0 core can process measurements and control logic while the 32 KB Flash provides room for embedded firmware. The integrated ADC supports analog sensor acquisition, and the 2.0 V to 3.6 V operating range is compatible with common 3.3 V industrial electronics. In a practical design, the MCU can sample sensors, apply filtering, evaluate thresholds, and publish results through a serial interface. The 32-UFQFPN package also reduces board area compared with larger MCU packages, although thermal grade, EMC isolation, and the exact exposed-pad layout must be validated for the deployment environment.

📟

Low-Power Data Acquisition Module

The STM32F051K6U6 is suitable for a compact data-acquisition module that must combine sensor conditioning, control, and communications on one board. Its ADC resources can capture analog measurements, while the 48 MHz Cortex-M0 core handles scaling, filtering, buffering, and control tasks. The 32 KB Flash is appropriate for firmware, calibration tables, and configuration logic in a focused embedded design. Communications interfaces allow the module to forward results to a host processor or network interface. The principal design consideration is analog layout: keep the ADC input path away from switching nodes, provide a clean reference arrangement, and follow the manufacturer pin and grounding recommendations.

🌐

Communication Transceiver Controller

The STM32F051K6U6 can serve as the control processor in a small communication transceiver or protocol-conversion module. Its communication interfaces provide a path between external transceivers, configuration registers, and a host interface, while the 11 timers support timing, framing, timeout, and periodic maintenance functions. At 48 MHz, the Cortex-M0 core has sufficient throughput for lightweight protocol stacks without requiring a larger processor. Place the MCU and transceiver according to signal-integrity requirements, including a controlled reference plane, short return paths, and separation between sensitive communication routes and switching circuitry. Firmware and pin multiplexing must be validated for the selected transceiver interface.

⚡

Compact Motor and Relay Controller

The STM32F051K6U6 can control compact motors, relays, valves, and actuator boards because its 11 timers support timing-intensive control functions while ADC inputs enable current, position, or supply monitoring. The 32 KB Flash is sufficient for a focused embedded controller, and the 2.0 V to 3.6 V supply range integrates easily with common 3.3 V logic systems. In use, the MCU executes control loops, handles fault inputs, and coordinates actuator outputs through external drivers. Designers should not drive inductive loads directly from MCU pins; use suitable driver circuitry, protection networks, and low-inductance routing to prevent switching transients from affecting the processor and analog signals.

🧩

Building Automation Endpoint

The STM32F051K6U6 fits building-automation endpoints that combine digital inputs, analog sensing, scheduled control, and serial backhaul. Its 48 MHz Cortex-M0 core supports protocol handling and local logic, while the ADC can monitor environmental sensors and analog status inputs. The compact 5 mm x 5 mm UFQFPN package is useful in wall controllers and room modules where board area is restricted. The MCU can debounce inputs, execute scheduled actions, update outputs, and communicate status over a serial bus. Firmware should include communication timeouts and safe-state behavior, while the PCB should provide appropriate separation, surge accommodation, and grounding for connections extending beyond the enclosure.

🔧

Portable Instrumentation and Test Equipment

The STM32F051K6U6 is appropriate for compact instrumentation where an operator interface, measurement, and control functions must coexist in a limited board area. The ADC resources can acquire sensor or test-point voltages, the DAC can generate test stimuli, and the timers can manage measurement windows and repetitive operations. At 48 MHz with 32 KB Flash, the device supports a lightweight embedded user interface and control routine without a complex processor. The 32-pin package leaves a small board footprint, but careful analog grounding, input protection, and calibration are essential. Verify the ADC and DAC accuracy limits in the manufacturer datasheet and include calibration data when measurements require repeatable results.

What are the key specifications of STM32F051K6U6 that engineers should know?
The STM32F051K6U6 combines an ARM Cortex-M0 core, 48 MHz maximum operating frequency, 32 KB of Flash memory, and a 2.0 V to 3.6 V supply range in a 32-pin UFQFPN package. According to the STMicroelectronics STM32F051K6 product page, the STM32F051 family also provides 11 timers, ADC, DAC, and communication interfaces. These characteristics make it suitable for compact embedded controllers that require analog conversion and serial connectivity without a larger package.
Where can I download the STM32F051K6U6 datasheet PDF?
The official STM32F051K6U6 documentation is available through the STMicroelectronics STM32F051K6 product page at the datasheet link on this page. The manufacturer page identifies the device as an ARM Cortex-M0 MCU operating up to 48 MHz with 32 KB of Flash memory. Use the manufacturer datasheet and package drawing for authoritative pin assignments, electrical limits, timing characteristics, and programming guidance.
What is the STM32F051K6U6 pinout and package?
The STM32F051K6U6 uses a 32-UFQFPN package with a stated body size of 5 mm x 5 mm. Its pin arrangement includes power, ground, clock, reset, programming, analog, and digital signal functions as defined in the manufacturer datasheet. Before routing a PCB, use the STMicroelectronics package drawing to confirm every pin number, exposed-pad connection, and exposed-pad thermal design.
What is the STM32F051K6U6 operating voltage range?
The STM32F051K6U6 operates from 2.0 V to 3.6 V according to the STMicroelectronics product listing and product family information. The device therefore fits common 3.3 V embedded systems and can operate from lower 2.0 V supplies when the complete design, including external peripherals and signal levels, remains compatible. Check individual peripheral and ADC accuracy requirements in the manufacturer datasheet before setting the system supply voltage.
What can replace the STM32F051K6U6?
The closest confirmed same-brand drop-in candidates are STM32F051K6U7, STM32F042K6U6, and STM32F301K6U7, subject to temperature-grade and peripheral validation. The STM32F051K6U6TR is only a reel-packaging variant and is not presented as a separate engineering alternative. No cross-brand device has been confirmed as both pin-to-pin and parametrically equivalent in the manufacturer and cross-reference information reviewed for this part.
Is STM32F051K6U6 the same as STM32F051K6U7?
The STM32F051K6U6 and STM32F051K6U7 use the same STM32F051K6 family and 32-UFQFPN package, but their order-code temperature grades differ. The U7 is the extended-temperature option, while U6 is the industrial-temperature option. Both retain the Cortex-M0 core, 48 MHz maximum frequency, 32 KB Flash configuration, and 5 mm x 5 mm footprint, making them board-compatible when the U7 temperature range covers the application.
STM32F051K6U6 vs STM32F042K6U6 - which is better for a compact sensor controller?
Choose the STM32F051K6U6 when the design benefits from its explicit 11-timer, ADC, DAC, and communication-interface feature set. The STM32F042K6U6 is the closer alternative when its 32-pin package and core resources meet the design while firmware and peripheral requirements differ. Verify the complete pin table and required peripherals in the manufacturer documentation rather than treating family membership as proof of complete functional interchangeability.
When should I choose STM32F051K6U6 over STM32F301K6U7?
Choose the STM32F051K6U6 when an established STM32F051 application needs its specified 32 KB Flash, 48 MHz Cortex-M0 performance, and 32-UFQFPN integration with ADC, DAC, and 11 timers. Consider the STM32F301K6U7 when its additional device resources or qualification are required and the board-level pin and firmware differences have been reviewed. The choice should be driven by peripheral requirements, not frequency alone.
Is STM32F051K6U6 suitable for industrial sensing and data acquisition?
Yes, the STM32F051K6U6 suits compact sensing and data-acquisition designs that benefit from 32 KB Flash, 48 MHz processing, ADC resources, and communication interfaces. Its 2.0 V to 3.6 V operating range also aligns with many embedded 3.3 V systems. For industrial deployment, verify the exact temperature grade, analog accuracy, isolation, EMC requirements, and long-term availability for the intended operating environment.
Where can I buy STM32F051K6U6 and check current lead time?
Use the Request a Quote form on this page to request STM32F051K6U6 availability, order quantities, and current lead time. The manufacturer lists the STM32F051K6 family as a microcontroller product, and distributor records identify the exact 32-UFQFPN ordering code. Quote requests are the appropriate channel for confirming the exact suffix, delivery schedule, and quantity needed for your production build.
What is the lead time for STM32F051K6U6?
The current lead time for STM32F051K6U6 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, component availability, and packaging requirements, so a fixed interval cannot be used as a purchasing commitment. Include your forecast quantities and target delivery date in the request to obtain an actionable schedule.
Is STM32F051K6U6 in stock?
Stock for STM32F051K6U6 should be confirmed through the Request a Quote form on this page before a purchase order is issued. The exact inventory position can change quickly with production allocation and order volume. State the required quantity, package suffix, target date, and acceptable delivery schedule so the current supply position can be matched to your procurement plan.
What is the price of STM32F051K6U6?
Use the Request a Quote form on this page for the current STM32F051K6U6 price and quantity schedule. Pricing depends on order quantity, current component availability, and commercial terms, while this exact MPN may be offered in different distribution channels. A quote request allows the current unit and volume structure to be matched to your production forecast.
Does the STM32F051K6U6 support ADC and DAC functions?
Yes, the STM32F051K6U6 includes ADC and DAC resources according to the STM32F051K6U6 technical listing. These converters support mixed-signal designs that measure analog inputs and generate analog outputs without requiring separate converter packages. Use the manufacturer datasheet for the exact channel count, resolution, sampling characteristics, reference requirements, and pin multiplexing before finalizing the schematic.
What programming and debug tools support STM32F051K6U6?
The STM32F051K6U6 is supported by the STMicroelectronics STM32 development ecosystem because it belongs to the STM32F0 family. Compatible programming and debug approaches include ST-LINK and SWD-based development systems described in the STM32F0 documentation. Confirm the exact debugger, pin assignment, boot configuration, and peripheral availability against STMicroelectronics support material for the exact device suffix.
What is the best STMicroelectronics equivalent for STM32F051K6U6?
The best same-brand equivalent depends on thermal grade and firmware requirements: STM32F051K6U7 is the closest temperature-range alternative, while STM32F042K6U6 and STM32F301K6U7 require closer peripheral review. No cross-brand equivalent can be recommended as a true drop-in replacement from the confirmed package and cross-reference information. A replacement is appropriate only when footprint, pin functions, electrical limits, memory, and firmware behavior have all been validated.

Mühendislik referans verileri: STM32F051K6U6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32F051K6U6 for compact embedded designs that specifically require its 48 MHz Cortex-M0 core, 32 KB Flash, 11 timers, ADC, DAC, communication interfaces, and 32-pin UFQFPN footprint. Select STM32F051K6U7 when the same electrical and memory configuration is needed but the application requires the extended-temperature order code. Consider STM32F042K6U6 when its reduced or different peripheral set is sufficient and the pin multiplexing has been checked. Consider STM32F301K6U7 when its additional device resources justify a firmware and peripheral migration. STM32F051K6T6 is appropriate when its temperature order code matches the deployment. No alternative should be approved solely because the packages match; verify pin functions, electrical limits, memory use, peripheral requirements, and firmware behavior before release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM32F051K6U7 STM32F042K6U6 STM32F301K6U7 STM32F051K6T6
Package 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB
Programming Interface STM32F0 debugging and programming ecosystem STM32F0 debugging and programming ecosystem STM32 debugging and programming ecosystem STM32 debugging and programming ecosystem STM32F0 debugging and programming ecosystem

Ana Farklılayıcılar

  • Integrated mixed-signal resources (karşılaştırma:STM32F042K6U6)
  • Extended-temperature drop-in option (karşılaştırma:STM32F051K6U7)
  • Same-footprint consolidation within STM32F0 (karşılaştırma:STM32F301K6U7)

Tasarım Notları

Use the manufacturer package drawing as the controlling source for the 32-UFQFPN footprint. Place the MCU's decoupling capacitors adjacent to the corresponding power and ground pins, with short, low-loop connections and an uninterrupted ground plane. Connect the exposed pad according to the datasheet recommendation, including its copper area and thermal-via arrangement, because an incorrectly designed thermal pad can impair heat transfer or assembly reliability.

Route analog inputs and references away from digital clock lines, relay drivers, inductive components, and switching-power nodes. Keep the analog ground connection strategy consistent with the device recommendations, and avoid long shared paths between sensitive sources and the ADC pins. If the design uses the DAC to generate a test signal, treat the output as an analog source and preserve a quiet return path to the controlled load.

Confirm every SWD, boot, reset, and clock connection against the exact package pin table before routing. Maintain a continuous ground reference beneath high-speed or communication traces, avoid unnecessary test pads on sensitive analog nets, and separate external connector paths from MCU pins where surge or ESD transients could enter. Validate the final layout with signal-integrity and EMC testing rather than relying only on schematic connectivity.

Do not assume that every similarly named STM32F0 device is firmware- or peripheral-compatible. The STM32F051K6U6 has a defined 2.0 V to 3.6 V operating range, a specific 32-pin function assignment, and a 32 KB Flash configuration. Before substituting another order code, verify the package drawing, pin multiplexing, clock setup, peripheral availability, interrupt mapping, bootloader behavior, and temperature grade against the manufacturer documentation.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The reviewed manufacturer product information does not state explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact order code. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.

İlgili Aramalar

stm32f051k6u6 datasheet STM32F051K6U6 datasheet PDF STM32F051K6U6 pinout STM32F051K6U6 footprint STM32F051K6U6 equivalent STM32F051K6U6 replacement STM32F051K6U6 cross reference STM32F051K6U6 vs STM32F051K6U7 STM32F051K6U6 price STM32F051K6U6 stock STMicroelectronics STM32F051K6U6 STM32F051K6U6 48MHz specifications STM32F051K6U6 UFQFPN pinout STM32F051K6U6 sensor controller What can replace STM32F051K6U6?

İlgili Bileşenler ve Terimler

STMicroelectronics STM32F051K6U6 STM32F051K6U7 STM32F042K6U6 STM32F301K6U7 STM32F051K6T6 ARM Cortex-M0 32-bit RISC core microcontroller embedded processor semiconductor STM32F0 series 32-UFQFPN package QFN family surface-mount package Flash memory ADC DAC timer serial communication interface industrial sensor node data acquisition building automation motor control 2.0 V to 3.6 V operating range
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle