STMicroelectronics

STM32L073VZT3 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics

MPN: STM32L073VZT3 ✓ Aktif
2.5 V / 3.3 V Vdss 100-pin LQFP (14 x 14 mm) Package 32 MHz Speed 192 KB (192K x 8) Memory
MOQ: 1 |

STM32L073VZT3 Genel Bakış

The STMicroelectronics STM32L073VZT3 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at up to 32 MHz, with 192 KB of embedded Flash memory, in a 100-pin LQFP 14 x 14 mm package. It combines an energy-efficient core with USB 2.0 crystal-less connectivity and LCD support, making it appropriate for compact embedded products that need low standby power and USB connectivity.

A microcontroller is a programmable system-on-chip that integrates a CPU core, embedded nonvolatile memory, RAM, peripherals, and communication interfaces onto one package. Within the product hierarchy, the STM32L073VZT3 is an ultra-low-power MCU, an Arm Cortex-M0+ microcontroller, and a member of the STM32L0 family. Its USB and LCD capabilities distinguish it from simpler STM32L0 devices intended for basic sensing or control tasks.

Key characteristics include a 32 MHz maximum operating frequency, 192 KB of Flash, a 100-pin LQFP package, 2.5 V and 3.3 V supply operation, and integrated USB connectivity. The USB 2.0 crystal-less feature allows the device to use the data lines as a clock source in supported operating modes, reducing external clock-component requirements. The LCD interface supports segmented display applications where the controller must drive a glass panel directly.

The STM32L0 architecture is intended for embedded designs where current consumption is as important as processing capability. Its Cortex-M0+ core provides a straightforward instruction set while retaining the peripherals and ecosystem associated with STM32 devices. The 192 KB Flash capacity provides room for application code, boot code, configuration data, and firmware updates in compact industrial, medical, consumer, and instrument products.

Typical uses include USB-connected data loggers, compact sensor-hub controllers, medical monitoring equipment, panel interfaces, and industrial devices that need a large pin count for external inputs, communications, and display connections. The 100-pin LQFP package offers more I/O than smaller STM32L0 packages, making it useful where several peripheral connections, analog inputs, or LCD and communication signals are required simultaneously.

When laying out the PCB, treat USB data lines as a controlled-impedance differential pair, route them away from switching nodes, and follow the layout and decoupling recommendations in the manufacturer datasheet. Validate USB enumeration, low-power behavior, display timing, and peripheral assignments on the first prototype because software pin mapping and board-level parasitics determine practical system performance.

This page consolidates package, connectivity, memory, sourcing, and design information around the STM32L073VZT3, including drop-in device options and engineering guidance that helps shorten component-selection and hardware-layout work.

Drop-in alternatifler için STM32L073VZT3 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM32L073VZT3 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Supply Voltage, Flash Memory, Communication Interfaces.

STMicroelectronics
Package: 100-lead LQFP (14 x 14 mm)
Supply Voltage: 3 V
İle Karşılaştır STM32L073VZT3 →
STMicroelectronics
Package: LQFP100 (14x14 mm)
Flash Memory: 192 KB
Communication Interfaces: I2C, SPI, USART, LPUART, USB 2.0 FS
İle Karşılaştır STM32L073VZT3 →
STMicroelectronics
Package: LQFP-100 (14x14 mm)
Supply Voltage: 1.8 V to 3.6 V
Flash Memory: 192 KB
İle Karşılaştır STM32L073VZT3 →

STM32L073VZT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 100-pin LQFP (14 x 14 mm)
ARM Cortex-M0+ · 32 MHz · 192 KB · 20 KB · LQFP-100 (14x14 mm) · 1.8 V to 3.6 V · -40C to +85C · 0.29 uA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L072VZT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 100-pin LQFP (14 x 14 mm)
ARM Cortex-M0+ · 32 MHz · 192 KB · 20 KB · 1.8 V to 3.6 V · LQFP100 (14x14 mm) · 84 · 12-bit, 16 channels, 1 Msps

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L071VZT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 100-pin LQFP (14 x 14 mm)
STMicroelectronics · STM32L0 Series, STM32L071 access line · 32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 192 KB (192K x 8)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L071RZT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 100-pin LQFP (14 x 14 mm)
Same Cortex-M0+ family and LQFP-100 footprint; lower Flash density reduces embedded code capacity by approximately 33%

📋 Katalogda Olmayan Referans Alternatifi

STM32L073RZTX

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 100-pin LQFP (14 x 14 mm)
Same STM32L073 family and LQFP-100 land pattern; lower Flash density and temperature-order suffix require validation

📋 Katalogda Olmayan Referans Alternatifi

STM32L073VZT3 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ultra-low-power microcontroller
CPU Core Arm Cortex-M0+
Instruction Set ARM 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 192 KB (192K x 8)
Besleme Gerilimi 2.5 V / 3.3 V
USB Interface USB 2.0 crystal-less
Display Support LCD controller
Paket 100-pin LQFP (14 x 14 mm)
Montaj Türü Surface mount
Shipping Format Tray

STM32L073VZT3 100-pin lqfp (14 x 14 mm) Pin Yapısı Kılavuzu

STM32L073VZT3 (100-pin lqfp (14 x 14 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

100-pin lqfp (14 x 14 mm) paket pin çizelgesi için STM32L073VZT3

Ayrıntılı pin çıkış verisi mevcut değil: STM32L073VZT3.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32L073VZT3 için uygundur 6 uygulamas: USB-Connected Sensor Hub, LCD Instrument Panel, Medical Monitoring Controller, Industrial Data Logger, USB Configuration and Upgrade Interface, Low-Power Control Module.

🧩

USB-Connected Sensor Hub

The STM32L073VZT3 fits a USB-connected sensor hub because it combines a 32 MHz Arm Cortex-M0+ core with 192 KB of Flash and USB 2.0 crystal-less connectivity. The 100-pin LQFP provides additional GPIO for environmental sensors, status indicators, and local storage interfaces without forcing a second controller onto the board. Place the USB data pair on a controlled-impedance route and use the manufacturer recommended crystal-less USB configuration. This design gains a compact single-controller architecture while retaining 32 MHz processing for sampling, filtering, and USB data packaging.

📺

LCD Instrument Panel

The STM32L073VZT3 is well suited to a segmented LCD instrument panel because the device includes LCD support and provides up to 88 GPIO in the 100-pin LQFP configuration. Its 192 KB Flash leaves space for measurement algorithms, calibration tables, menus, and communication firmware on one MCU. Use the LCD controller outputs for glass-panel drive signals and keep the segment connections away from high-current switching edges. The result is a compact control platform for meters, laboratory instruments, and appliance interfaces without requiring a separate display controller.

💊

Medical Monitoring Controller

The STM32L073VZT3 can serve as the central controller in a medical monitoring device that combines sensors, a local display, and USB data logging. Its Cortex-M0+ core operates at up to 32 MHz for sensor sampling and signal conditioning, while 192 KB of Flash accommodates firmware for measurement, filtering, alarms, and data export. The extensive LQFP pin count helps connect multiple analog inputs, buttons, indicators, and communication signals. Validate medical-specific regulatory requirements, isolation, leakage current, and electrode protection independently of the MCU specifications.

🏭

Industrial Data Logger

The STM32L073VZT3 supports an industrial data logger by combining 192 KB of Flash, a 32 MHz core, and low-power STM32L0 characteristics. Its 100-pin package provides enough connections for multiple sensors, digital inputs, status LEDs, and a serial data interface. Use the low-power modes during idle logging intervals, then activate the USB interface for configuration transfer or file export. The architecture fits temperature monitoring, equipment counters, environmental stations, and compact process recorders where low standby consumption and integrated connectivity are priorities.

🖥️

USB Configuration and Upgrade Interface

The STM32L073VZT3 is useful as a USB configuration interface for appliances, test equipment, and embedded modules that need firmware download or runtime configuration. The USB 2.0 crystal-less capability reduces the external clock requirement in supported modes, while 192 KB of Flash can hold both an application and communication code. Implement a USB bootloader that validates image signatures before writing Flash. Route the pair symmetrically, provide the required series impedance, and verify enumeration across the temperature range and power states used by the finished product.

⚡

Low-Power Control Module

The STM32L073VZT3 fits low-power control modules that coordinate relays, analog inputs, indicators, and communication ports. The Cortex-M0+ core handles control logic at up to 32 MHz, and the STM32L0 family's low-power emphasis allows the design to remain in a reduced-consumption state when active sensing is not required. The 100-pin LQFP provides more routing flexibility than a compact MCU package. Confirm each peripheral's availability, pin multiplexing, and wake-up behavior in the STM32L073VZ documentation before finalizing the board.

What is the STM32L073VZT3?
The STM32L073VZT3 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller from STMicroelectronics with a maximum clock of 32 MHz, 192 KB of embedded Flash, USB 2.0 crystal-less connectivity, and LCD support. It is packaged in a 100-pin 14 x 14 mm LQFP for designs requiring more GPIO and peripheral connections than smaller STM32L0 packages provide.
What is the operating voltage of STM32L073VZT3?
The STM32L073VZT3 operates from a 2.5 V or 3.3 V supply, as identified in the manufacturer product listing and distributor specifications. This supply range suits low-voltage embedded systems that must interface with 3.3 V sensors, displays, and USB circuitry. Check the individual peripheral and I/O voltage limits in the manufacturer datasheet before applying a 2.5 V rail to every interface.
How much Flash memory does the STM32L073VZT3 have?
The STM32L073VZT3 provides 192 KB of Flash memory organized as 192K x 8. This gives a developer room for an embedded application, bootloader, configuration records, and field-update logic in one device. The distributor listing and the STM32L073VZ product family description identify the device as a 192 KB, 32 MHz STM32L0 microcontroller.
What is the maximum CPU frequency of the STM32L073VZT3?
The STM32L073VZT3 runs at up to 32 MHz. Its Arm Cortex-M0+ core provides efficient 32-bit processing without the higher clock and power requirements associated with more performance-oriented Cortex-M families. The 32 MHz figure makes the device suitable for low-power control, communications, data acquisition, and human-interface workloads where moderate processing throughput is sufficient.
Does the STM32L073VZT3 support USB and LCD?
Yes, the STM32L073VZT3 combines USB 2.0 crystal-less connectivity with an LCD controller. The crystal-less USB feature lets the device derive a usable clock from USB data activity in supported configurations, reducing the need for a dedicated USB clock source. LCD support permits direct control of compatible segmented glass panels.
Where can I download the STM32L073VZT3 datasheet?
The official STM32L073VZ product page provides the manufacturer datasheet and supporting documentation for the STM32L073VZT3. Open that product page and select the datasheet in the technical-document section. The DigiKey listing and Mouser product page also link to device documentation, but the ST product page remains the authoritative source for pin assignments and electrical characteristics.
Where can I find the STM32L073VZT3 pinout?
The STM32L073VZT3 pinout is documented in the pin-description table and package drawings in the official STM32L073VZ datasheet. Because this is a 100-pin LQFP device, use the package drawing to identify every boundary pin and exposed pad arrangement rather than relying on a reduced pin map. Confirm the exact package variant before assigning signals in the PCB footprint.
What can replace the STM32L073VZT3?
The closest drop-in options are same-family STM32L0 devices that use the same 100-pin LQFP footprint and retain the Cortex-M0+ architecture, such as STM32L073VZT6 and STM32L072VZT6. Temperature grade, Flash capacity, peripheral differences, and software device identification must still be checked before substitution. A same-footprint package match alone does not guarantee identical USB, LCD, or clock behavior.
Is the STM32L073VZT3 the same as STM32L073VZT6?
The STM32L073VZT3 and STM32L073VZT6 share the STM32L073VZ device family, Cortex-M0+ core, 192 KB Flash configuration, and 100-pin LQFP footprint. Their order-code temperature suffixes differ, so the electrical temperature ratings and availability conditions must be compared before interchange. The suffix difference is not a PCB footprint difference.
When should I choose STM32L073VZT3 instead of STM32L072VZT6?
Choose the STM32L073VZT3 when the design requires the specific STM32L073VZ feature set, including the listed USB 2.0 crystal-less connectivity and LCD support. Choose STM32L072VZT6 only after confirming that its USB, display, memory, and peripheral configuration satisfy the product requirements. For production sourcing, compare the active lifecycle state and operating-temperature grade of both order codes.
Is the STM32L073VZT3 suitable for a USB-connected sensor hub?
The STM32L073VZT3 is suitable for a USB-connected sensor hub because it combines a 32 MHz Cortex-M0+ core, 192 KB of Flash, and USB 2.0 crystal-less connectivity in one package. Its 100-pin LQFP also provides more peripheral routing options than a small-outline MCU. Validate sensor timing, USB enumeration, and low-power requirements during prototype testing.
What is the best STMicroelectronics equivalent for STM32L073VZT3?
The best same-footprint STMicroelectronics alternatives include STM32L073VZT6, STM32L072VZT6, STM32L071VZT6, and STM32L071RZT6, subject to verification of the complete pin, memory, peripheral, and temperature specifications. These are family-level drop-in candidates rather than a claim of identical behavior. Confirm every board-connected signal and required firmware peripheral against the manufacturer datasheet.
How do I check the STM32L073VZT3 pin compatibility for a replacement?
Check pin compatibility by comparing the 100-pin LQFP footprint, pin-number table, power pins, ground pins, boot and reset pins, and every externally connected signal against the manufacturer datasheet. Also verify Flash size, RAM, USB, LCD, clock sources, and the operating-temperature grade. A matching package drawing establishes physical fit, while the pin table establishes electrical compatibility.
Where can I buy STM32L073VZT3 online?
Use the Request a Quote form on this page to request STM32L073VZT3 availability, current lead time, and order handling from XAIPART. The part is also listed by STMicroelectronics, DigiKey, Mouser, Arrow, and the ST online store, but this page does not quote their prices or stock figures. Confirm the exact MPN and tray packing when submitting a purchase request.
What is the price and lead time for STM32L073VZT3?
The current price and lead time for the STM32L073VZT3 are obtained through the Request a Quote form on this page. Quote requests confirm live availability, volume breaks, and delivery scheduling against the exact 100-pin LQFP tray order code. Submit the required quantity and target ship date with the request to receive a current commercial response.
What are the key specifications of STM32L073VZT3 that engineers should know?
The key STM32L073VZT3 specifications are a 32 MHz Arm Cortex-M0+ core, 192 KB of embedded Flash, 2.5 V or 3.3 V operation, USB 2.0 crystal-less connectivity, LCD support, and a 100-pin 14 x 14 mm LQFP package. These attributes position the device for low-power embedded systems requiring USB, display control, and a relatively high pin count.

Mühendislik referans verileri: STM32L073VZT3 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32L073VZT3 when the design needs a 100-pin STM32L0 controller with a 32 MHz Cortex-M0+ core, 192 KB of Flash, USB 2.0 crystal-less connectivity, and LCD support. It is particularly suitable for connected instruments, sensor hubs, panel controllers, and low-power logging equipment that need more GPIO than compact STM32L0 packages provide.

Choose STM32L073VZT6 when the package, memory, and feature set match and the required temperature grade corresponds to that suffix. Consider STM32L072VZT6 when its documented USB, LCD, and peripheral configuration satisfies the design. Use STM32L071VZT6 only after confirming that the omitted or different peripherals are acceptable. STM32L071RZT6 and STM32L073RZTX are more appropriate when 128 KB of Flash is sufficient.

For every candidate, verify the complete pin table, power architecture, oscillator requirements, temperature range, and USB behavior. Physical fit in the same LQFP-100 footprint is a starting point for second sourcing, not proof that firmware and electrical performance are identical.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM32L073VZT6 STM32L072VZT6 STM32L071VZT6 STM32L071RZT6 STM32L073RZTX
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm)
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 192 KB 192 KB 192 KB 192 KB 128 KB 128 KB
Supply Voltage 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V
Temperature-Grade Suffix T3 T6 T6 T6 T6 TX

Ana Farklılayıcılar

  • Matches the STM32L073VZ family while preserving a large-pin-count PCB footprint (karşılaştırma:STM32L071RZT6)
  • Combines USB connectivity and LCD control with a 32 MHz Cortex-M0+ core (karşılaştırma:STM32L071VZT6)
  • Uses the same 100-pin LQFP package family for pin-compatible STM32L0 sourcing options (karşılaştırma:STM32L073VZT6)
  • Provides higher code storage than the lower-density family alternatives (karşılaştırma:STM32L073RZTX)

Tasarım Notları

Route the USB D+ and D- pair as a short, symmetric, continuously referenced differential pair. Keep the pair away from inductors, switching-regulator power paths, and high-current edge rates. Use the manufacturer datasheet's recommended USB routing and impedance guidance, and place any required input or output components close to the relevant package pins.

Use the 2.5 V or 3.3 V supply appropriate for the complete design and place the manufacturer-recommended bypass capacitors adjacent to the device power pins. Include adequate bulk capacitance near the supply entry point for USB bus transients. Verify current consumption in run, sleep, and standby modes because the low-power capability is useful only when peripheral clocks and unused I/O states are configured correctly.

Do not treat an LQFP-100 package match as sufficient proof of interchangeability. Compare the STM32L073VZ pin table, ground and supply assignments, boot pins, USB pins, LCD outputs, and all board-connected peripheral signals. Also verify Flash capacity, temperature grade, oscillator requirements, and device-specific USB behavior before releasing a substitute into production.

Plan the 100-pin footprint carefully because the fine-pitch LQFP can complicate assembly and rework. Follow the manufacturer package drawing for land dimensions, solder-mask clearance, and paste recommendations. Place programming and test points where they remain accessible after assembly, and separate sensitive analog or LCD routes from digital switching activity.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status must be confirmed for the selected order code using the manufacturer product page and its material-declaration documentation.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM32L073VZT3 datasheet STM32L073VZT3 specifications STM32L073VZT3 pinout STM32L073VZT3 LQFP-100 footprint STM32L073VZT3 equivalent STM32L073VZT3 replacement STM32L073VZT3 vs STM32L072VZT6 STM32L073VZT3 vs STM32L071VZT6 STM32L073VZT3 USB crystal-less STM32L073VZT3 192KB Flash STMicroelectronics STM32L073VZT3 STM32L073VZT3 buy online STM32L073VZT3 price quote STM32L073VZT3 lead time STM32L073VZT3 USB sensor hub

İlgili Bileşenler ve Terimler

STMicroelectronics STM32L073VZT3 STM32L073VZ STM32L073VZT6 STM32L072VZT6 STM32L071VZT6 STM32L071RZT6 STM32L073RZTX STM32L0 Arm Cortex-M0+ ultra-low-power microcontroller 32-bit microcontroller embedded Flash USB 2.0 crystal-less USB LCD controller LQFP-100 surface mount 32 MHz 192 KB Flash 2.5 V 3.3 V USB data logger industrial sensor hub
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle