STM32L073VZT3 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics
Teilenummer: STM32L073VZT3 ✓ AktivSTM32L073VZT3 Übersicht
A microcontroller is a programmable system-on-chip that integrates a CPU core, embedded nonvolatile memory, RAM, peripherals, and communication interfaces onto one package. Within the product hierarchy, the STM32L073VZT3 is an ultra-low-power MCU, an Arm Cortex-M0+ microcontroller, and a member of the STM32L0 family. Its USB and LCD capabilities distinguish it from simpler STM32L0 devices intended for basic sensing or control tasks.
Key characteristics include a 32 MHz maximum operating frequency, 192 KB of Flash, a 100-pin LQFP package, 2.5 V and 3.3 V supply operation, and integrated USB connectivity. The USB 2.0 crystal-less feature allows the device to use the data lines as a clock source in supported operating modes, reducing external clock-component requirements. The LCD interface supports segmented display applications where the controller must drive a glass panel directly.
The STM32L0 architecture is intended for embedded designs where current consumption is as important as processing capability. Its Cortex-M0+ core provides a straightforward instruction set while retaining the peripherals and ecosystem associated with STM32 devices. The 192 KB Flash capacity provides room for application code, boot code, configuration data, and firmware updates in compact industrial, medical, consumer, and instrument products.
Typical uses include USB-connected data loggers, compact sensor-hub controllers, medical monitoring equipment, panel interfaces, and industrial devices that need a large pin count for external inputs, communications, and display connections. The 100-pin LQFP package offers more I/O than smaller STM32L0 packages, making it useful where several peripheral connections, analog inputs, or LCD and communication signals are required simultaneously.
When laying out the PCB, treat USB data lines as a controlled-impedance differential pair, route them away from switching nodes, and follow the layout and decoupling recommendations in the manufacturer datasheet. Validate USB enumeration, low-power behavior, display timing, and peripheral assignments on the first prototype because software pin mapping and board-level parasitics determine practical system performance.
This page consolidates package, connectivity, memory, sourcing, and design information around the STM32L073VZT3, including drop-in device options and engineering guidance that helps shorten component-selection and hardware-layout work.
Drop-in-Alternativen für STM32L073VZT3 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32L073VZT3 (gleiche Bauform und Footprint) – abweichend in Package, Supply Voltage, Flash Memory, Communication Interfaces.
STM32L073VZT6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32L072VZT6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32L071VZT6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32L071RZT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32L073RZTX
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32L073VZT3 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Instruction Set | ARM 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 192 KB (192K x 8) |
| Versorgungsspannung | 2.5 V / 3.3 V |
| USB Interface | USB 2.0 crystal-less |
| Display Support | LCD controller |
| Gehäuse | 100-pin LQFP (14 x 14 mm) |
| Montageart | Surface mount |
| Shipping Format | Tray |
STM32L073VZT3 100-pin lqfp (14 x 14 mm) Pinbelegungsleitfaden
Pinbelegung für STM32L073VZT3 (100-pin lqfp (14 x 14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32L073VZT3.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32L073VZT3 ist geeignet für 6 Anwendungs: USB-Connected Sensor Hub, LCD Instrument Panel, Medical Monitoring Controller, Industrial Data Logger, USB Configuration and Upgrade Interface, Low-Power Control Module.
USB-Connected Sensor Hub
The STM32L073VZT3 fits a USB-connected sensor hub because it combines a 32 MHz Arm Cortex-M0+ core with 192 KB of Flash and USB 2.0 crystal-less connectivity. The 100-pin LQFP provides additional GPIO for environmental sensors, status indicators, and local storage interfaces without forcing a second controller onto the board. Place the USB data pair on a controlled-impedance route and use the manufacturer recommended crystal-less USB configuration. This design gains a compact single-controller architecture while retaining 32 MHz processing for sampling, filtering, and USB data packaging.
Empfohlen
LCD Instrument Panel
The STM32L073VZT3 is well suited to a segmented LCD instrument panel because the device includes LCD support and provides up to 88 GPIO in the 100-pin LQFP configuration. Its 192 KB Flash leaves space for measurement algorithms, calibration tables, menus, and communication firmware on one MCU. Use the LCD controller outputs for glass-panel drive signals and keep the segment connections away from high-current switching edges. The result is a compact control platform for meters, laboratory instruments, and appliance interfaces without requiring a separate display controller.
Empfohlen
Medical Monitoring Controller
The STM32L073VZT3 can serve as the central controller in a medical monitoring device that combines sensors, a local display, and USB data logging. Its Cortex-M0+ core operates at up to 32 MHz for sensor sampling and signal conditioning, while 192 KB of Flash accommodates firmware for measurement, filtering, alarms, and data export. The extensive LQFP pin count helps connect multiple analog inputs, buttons, indicators, and communication signals. Validate medical-specific regulatory requirements, isolation, leakage current, and electrode protection independently of the MCU specifications.
Empfohlen
Industrial Data Logger
The STM32L073VZT3 supports an industrial data logger by combining 192 KB of Flash, a 32 MHz core, and low-power STM32L0 characteristics. Its 100-pin package provides enough connections for multiple sensors, digital inputs, status LEDs, and a serial data interface. Use the low-power modes during idle logging intervals, then activate the USB interface for configuration transfer or file export. The architecture fits temperature monitoring, equipment counters, environmental stations, and compact process recorders where low standby consumption and integrated connectivity are priorities.
Empfohlen
USB Configuration and Upgrade Interface
The STM32L073VZT3 is useful as a USB configuration interface for appliances, test equipment, and embedded modules that need firmware download or runtime configuration. The USB 2.0 crystal-less capability reduces the external clock requirement in supported modes, while 192 KB of Flash can hold both an application and communication code. Implement a USB bootloader that validates image signatures before writing Flash. Route the pair symmetrically, provide the required series impedance, and verify enumeration across the temperature range and power states used by the finished product.
Empfohlen
Low-Power Control Module
The STM32L073VZT3 fits low-power control modules that coordinate relays, analog inputs, indicators, and communication ports. The Cortex-M0+ core handles control logic at up to 32 MHz, and the STM32L0 family's low-power emphasis allows the design to remain in a reduced-consumption state when active sensing is not required. The 100-pin LQFP provides more routing flexibility than a compact MCU package. Confirm each peripheral's availability, pin multiplexing, and wake-up behavior in the STM32L073VZ documentation before finalizing the board.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32L073VZT3 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Choose STM32L073VZT6 when the package, memory, and feature set match and the required temperature grade corresponds to that suffix. Consider STM32L072VZT6 when its documented USB, LCD, and peripheral configuration satisfies the design. Use STM32L071VZT6 only after confirming that the omitted or different peripherals are acceptable. STM32L071RZT6 and STM32L073RZTX are more appropriate when 128 KB of Flash is sufficient.
For every candidate, verify the complete pin table, power architecture, oscillator requirements, temperature range, and USB behavior. Physical fit in the same LQFP-100 footprint is a starting point for second sourcing, not proof that firmware and electrical performance are identical.
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32L073VZT6 | STM32L072VZT6 | STM32L071VZT6 | STM32L071RZT6 | STM32L073RZTX |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 192 KB | 192 KB | 192 KB | 192 KB | 128 KB | 128 KB |
| Supply Voltage | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
| Temperature-Grade Suffix | T3 | T6 | T6 | T6 | T6 | TX |
Wichtigste Unterscheidungsmerkmale
- Matches the STM32L073VZ family while preserving a large-pin-count PCB footprint (vs. STM32L071RZT6)
- Combines USB connectivity and LCD control with a 32 MHz Cortex-M0+ core (vs. STM32L071VZT6)
- Uses the same 100-pin LQFP package family for pin-compatible STM32L0 sourcing options (vs. STM32L073VZT6)
- Provides higher code storage than the lower-density family alternatives (vs. STM32L073RZTX)
Designhinweise
Route the USB D+ and D- pair as a short, symmetric, continuously referenced differential pair. Keep the pair away from inductors, switching-regulator power paths, and high-current edge rates. Use the manufacturer datasheet's recommended USB routing and impedance guidance, and place any required input or output components close to the relevant package pins.
Use the 2.5 V or 3.3 V supply appropriate for the complete design and place the manufacturer-recommended bypass capacitors adjacent to the device power pins. Include adequate bulk capacitance near the supply entry point for USB bus transients. Verify current consumption in run, sleep, and standby modes because the low-power capability is useful only when peripheral clocks and unused I/O states are configured correctly.
Do not treat an LQFP-100 package match as sufficient proof of interchangeability. Compare the STM32L073VZ pin table, ground and supply assignments, boot pins, USB pins, LCD outputs, and all board-connected peripheral signals. Also verify Flash capacity, temperature grade, oscillator requirements, and device-specific USB behavior before releasing a substitute into production.
Plan the 100-pin footprint carefully because the fine-pitch LQFP can complicate assembly and rework. Follow the manufacturer package drawing for land dimensions, solder-mask clearance, and paste recommendations. Place programming and test points where they remain accessible after assembly, and separate sensitive analog or LCD routes from digital switching activity.
Compliance-Informationen
Compliance status must be confirmed for the selected order code using the manufacturer product page and its material-declaration documentation.