STMicroelectronics

TS932AIN - Dual 100 kHz Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS932AIN ✗ Son Kullanım Zamanı
8-pin DIP Package
MOQ: 1 |

TS932AIN Genel Bakış

The STMicroelectronics TS932AIN is a dual general-purpose operational amplifier with rail-to-rail output, a 100 kHz gain-bandwidth product, and micropower operation, packaged in an 8-pin through-hole DIP. Each package contains two amplifier circuits, allowing a design to use two independent analog signal paths while retaining a compact, industry-standard footprint.

An operational amplifier is a voltage-feedback analog IC that compares an amplified error signal with a feedback network to control its output. The TS932AIN belongs to the dual operational amplifier category, combining two amplifier channels in one package. Its rail-to-rail output architecture is useful when signals must remain usable near the available supply limits, while its micropower design suits battery-operated and low-power instrumentation.

The principal features of the TS932AIN include two amplifier circuits, rail-to-rail output, a 100 kHz gain-bandwidth product, and an industrial temperature grade. The 100 kHz bandwidth supports general-purpose low-frequency signal conditioning rather than demanding high-speed waveform applications. The through-hole 8-DIP construction supports prototyping, repair, legacy equipment, and industrial control boards where leaded packages remain convenient to assemble.

The TS932AIN is specified as a general-purpose amplifier rather than a precision or high-voltage part. Because the device uses an 8-pin DIP, it provides two complete amplifier channels with shared supply pins. Designers should verify the manufacturer's pin description and operating limits against the target circuit before substituting it into safety-critical, automotive, or medical equipment.

Typical uses include low-frequency sensor conditioning, current-loop and voltage-amplifier stages, industrial control interfaces, audio preamplification, and portable measurement systems. Its dual-channel configuration can reduce component count when two similar low-frequency signals must be conditioned. The 100 kHz gain-bandwidth rating also makes it appropriate for slow control loops and modest instrumentation bandwidth, rather than pulse or data-conversion applications demanding much higher bandwidth.

For a new design, check input bias current, output swing, supply range, noise, and stability requirements against the manufacturer datasheet before committing to the TS932AIN. Place bypass capacitors close to the supply pins, keep feedback paths compact, and observe the standard dual-op-amp pin arrangement shown below. This page also identifies package and function alternatives while clearly separating true PCB drop-ins from options that require a layout change.

Drop-in alternatifler için TS932AIN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

TS932AIN Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type General-purpose operational amplifier
Number of Circuits 2 circuits
Gain-Bandwidth Product 100 kHz
Output Architecture Rail-to-rail output
Power Class Micropower operational amplifier
Temperature Grade Industrial
Package Type 8-pin DIP
Package Code DIP
Package Shape Rectangular
Montaj Türü Through-hole
Number of Terminals 8 terminals
Number of Amplifier Channels 2
RoHS Durumu Compliant

TS932AIN Pin Yapısı

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN-1 — Amplifier 1 inverting input
Pin 3 IN+1 — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply
Pin 5 IN+2 — Amplifier 2 non-inverting input
Pin 6 IN-2 — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 V+ — Positive supply

Tipik Uygulamalar

TS932AIN için uygundur 6 uygulamas: Low-Frequency Sensor Conditioning, Industrial Control Signal Interface, Portable Battery-Powered Measurement, Audio Preamplifier Stage, Precision Test and Measurement Front End, Legacy Equipment Repair and Continuation.

🏭

Low-Frequency Sensor Conditioning

The TS932AIN fits two-channel sensor conditioning because each package provides two general-purpose operational amplifiers with rail-to-rail output and a 100 kHz gain-bandwidth product. One channel can amplify a sensor signal while the other handles a reference or monitor signal, reducing duplicated components. The 8-pin DIP construction is particularly convenient for industrial instrumentation prototypes and repair boards that use through-hole footprints. Before finalizing the stage, verify the sensor impedance, amplifier input bias current, common-mode range, and output-swing limits in the manufacturer datasheet. The 100 kHz bandwidth is appropriate for slow process variables, resistive sensors, and supervisory signals rather than fast pulse measurement.

🏭

Industrial Control Signal Interface

The dual TS932AIN is useful in industrial control boards that must translate low-level voltage signals into control-system ranges. Its two rail-to-rail-output amplifier channels can be assigned to separate command or feedback paths, while the 100 kHz gain-bandwidth product covers most slow closed-loop and signal-conditioning tasks. The through-hole 8-DIP package simplifies assembly and repair on legacy PLC or instrumentation boards. Designers should confirm the operating voltage, input common-mode range, output capability, and stability with the required feedback network. Industrial qualification also requires checking the exact temperature grade and any application-specific isolation or safety requirements.

📱

Portable Battery-Powered Measurement

The TS932AIN's micropower operational-amplifier positioning makes it applicable to portable, battery-powered measurement circuits where power consumption and analog conditioning must be balanced. Two amplifier channels can process related sensor outputs without requiring two separate packages, and the 100 kHz gain-bandwidth product is sufficient for many portable health, environmental, and industrial monitoring signals. Rail-to-rail output can improve utilization of limited signal headroom, although actual swing limits depend on the supply and load. Verify quiescent current, input offset, noise, and achievable output range in the manufacturer datasheet before setting battery-life expectations or designing the enclosure and power tree.

🎧

Audio Preamplifier Stage

The TS932AIN can serve in low-level audio preamplifier and buffering paths where two channels must be handled by one dual package. Rail-to-rail output supports use of more of the available signal range, and the 100 kHz gain-bandwidth product is ample for common audio-band conditioning stages. The 8-pin DIP package is useful in prototype audio equipment, educational designs, and legacy amplifier boards where through-hole construction is preferred. Audio performance still depends on input-noise behavior, offset voltage, output drive, and the selected gain network, all of which must be checked in the manufacturer datasheet. Stable feedback layout and adequate supply decoupling are especially important near microphone-level inputs.

🔧

Precision Test and Measurement Front End

The TS932AIN can support low-frequency instrumentation and test-equipment front ends where a dual general-purpose amplifier is needed for excitation, buffering, or gain stages. Its 100 kHz gain-bandwidth product covers many slowly varying measurement channels, and the two channels provide flexibility for processing a sense signal and a reference within one package. The industrial temperature grade supports appropriate equipment categories when the complete operating-range requirements are met. For precision work, engineers must review offset voltage, bias current, noise density, common-mode range, and drift rather than relying on bandwidth alone. The manufacturer datasheet should supply the values needed for error-budget calculations.

🔧

Legacy Equipment Repair and Continuation

The TS932AIN is especially relevant to repairing and maintaining equipment designed around 8-pin through-hole DIP operational amplifiers. The rectangular DIP package, two amplifier channels, and documented general-purpose rail-to-rail function make it a practical candidate for restoring failed analog sections in legacy instrumentation, control, and signal-processing equipment. Before ordering, compare the failed device's pin functions, supply requirements, gain-bandwidth behavior, offset, bias current, and load capability. Because the part is obsolete, request current condition and traceability through the Request a Quote form. For a new board, use the original footprint and verify every electrical limit rather than assuming every dual DIP amplifier is interchangeable.

What is the TS932AIN?
The TS932AIN is a dual, general-purpose, rail-to-rail-output operational amplifier with a 100 kHz gain-bandwidth product and micropower characteristics. The STMicroelectronics device contains two amplifier circuits in an 8-pin through-hole DIP package and is intended for low-frequency signal-conditioning and control applications. According to the manufacturer datasheet, the TS932AIN is categorized as an output rail-to-rail micropower operational amplifier.
What are the key specifications of TS932AIN that engineers should know?
The TS932AIN provides two amplifier channels, rail-to-rail output, a 100 kHz gain-bandwidth product, micropower operation, and an industrial temperature grade. It is supplied in an 8-pin rectangular DIP with through-hole mounting. The manufacturer datasheet describes the part as a general-purpose, output rail-to-rail micropower operational amplifier, making it appropriate for general analog conditioning rather than high-speed signal processing.
Is the TS932AIN still active?
The TS932AIN is classified as obsolete and may require sourcing legacy inventory for repair and continuation work. A distributor listing identifies the exact STMicroelectronics TS932AIN as obsolete while still offering rare stock, and the manufacturer datasheet remains available for design reference. For a new production design, confirm lifecycle status and obtain a written quotation through the Request a Quote form on this page.
Where can I download the TS932AIN datasheet PDF?
The TS932AIN datasheet PDF is available from the datasheet link on this page, which redirects to the documented STMicroelectronics TS932AIN data sheet for the rail-to-rail micropower operational amplifier. The indexed document contains 15 pages. Use the manufacturer pin-description table and electrical characteristics before assigning PCB connections or selecting external feedback and biasing components.
Where can I find the TS932AIN pinout?
The TS932AIN pinout is shown in the package diagram on this page and uses the conventional 8-pin dual-op-amp arrangement: outputs on pins 1 and 7, inverting inputs on pins 2 and 6, non-inverting inputs on pins 3 and 5, negative supply on pin 4, and positive supply on pin 8. Cross-check these connections against the manufacturer datasheet before finalizing a PCB or repairing legacy equipment.
What is the gain-bandwidth product of the TS932AIN?
The TS932AIN has a gain-bandwidth product of 100 kHz. This value indicates that the closed-loop bandwidth decreases as the operational-amplifier gain increases, following the approximate relationship between gain-bandwidth product and closed-loop bandwidth. The 100 kHz rating is suitable for general-purpose low-frequency conditioning, but it is not intended for high-speed pulse, video, or precision data-acquisition front ends.
Is the TS932AIN suitable for low-frequency sensor conditioning?
Yes, the TS932AIN is suitable for low-frequency sensor conditioning because it combines a 100 kHz gain-bandwidth product with rail-to-rail output and two amplifier channels per package. The dual arrangement can condition two related inputs while reducing board area. Verify sensor source impedance, input bias current, common-mode range, and noise requirements in the manufacturer datasheet before selecting the amplifier for a high-impedance source.
Where can I buy TS932AIN online?
Use the Request a Quote form on this page to request TS932AIN availability, condition, and a formal quotation. Because the TS932AIN is an obsolete STMicroelectronics part, the available supply may consist of legacy inventory rather than current production. Provide the required quantity, package condition, and target delivery schedule so the request can be matched to available sourcing options.
What is the lead time for TS932AIN?
The current TS932AIN lead time depends on available legacy inventory and should be requested through the Request a Quote form on this page. The device is obsolete, so its supply is not equivalent to a routinely manufactured part. Include your required quantity, date code preference, acceptable storage duration, and destination country when requesting a quotation and delivery commitment.
Is TS932AIN in stock?
Stock availability for the obsolete TS932AIN must be confirmed through the Request a Quote form on this page. One distributor listing identifies the exact MPN as obsolete with rare inventory available, but that observation does not guarantee a quantity suitable for every production run. Submit the required quantity and packaging preference so current stock can be checked against your schedule.
What is the difference between TS932AIN and TS932AID?
The principal documented difference is package construction: TS932AIN uses an 8-pin through-hole DIP, while TS932AID is listed as a related same-series SO-8 option. Both belong to the TS932A dual operational-amplifier family and provide rail-to-rail output, but an SO-8 version is not a direct drop-in replacement for a through-hole DIP PCB. Verify the exact pin arrangement and electrical details in the manufacturer datasheet before choosing it.
When should I choose TS932AIN instead of TS932AID?
Choose TS932AIN when the board specifically uses an 8-pin through-hole DIP footprint or an existing assembly requires a leaded package. Choose TS932AID when the PCB is designed for an SO-8 footprint and the associated package dimensions, pin geometry, and assembly process have already been verified. TS932AID offers smaller surface-mount construction, while TS932AIN supports leaded insertion and legacy repair workflows.
Can TS932AID replace TS932AIN without changing the PCB?
No, TS932AID should not be treated as a direct TS932AIN replacement on an unchanged 8-pin DIP footprint. The related part uses an SO-8 package, so its body dimensions, lead geometry, and land pattern differ from the TS932AIN through-hole package. An adapter board or PCB redesign is required, and the pin functions must be checked before assembly.
What is the best drop-in replacement for TS932AIN?
No verified same-package drop-in replacement is identified for the obsolete TS932AIN. A genuine replacement must match the 8-pin DIP footprint, provide two amplifier channels, maintain compatible supply and signal connections, and stay within acceptable bandwidth, noise, bias-current, and output-swing limits. Use the Request a Quote form for the original MPN, and obtain manufacturer or engineering approval before introducing any substitute into production.
Is TS932AIN the same as LM2902N/PB?
The TS932AIN and LM2902N/PB are both dual operational-amplifier devices that may serve related general-purpose signal-conditioning roles, but they are not automatically interchangeable. The TS932AIN has a documented 100 kHz gain-bandwidth product, rail-to-rail output, micropower positioning, and an 8-pin DIP package. Compare the exact LM2902N/PB supply range, input bias current, offset voltage, output swing, noise, and pinout before considering a substitution.

Mühendislik referans verileri: TS932AIN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TS932AIN when an existing circuit requires a dual, general-purpose, rail-to-rail-output operational amplifier in an 8-pin through-hole DIP package, particularly for legacy repair or industrial instrumentation. Its 100 kHz gain-bandwidth product supports low-frequency conditioning rather than fast pulse or data-acquisition applications. Choose TS932AID or TS932AIDT for a new surface-mount design because their SO-8 packages permit smaller PCB layouts, but they are not drop-in replacements for the DIP footprint. LM2902N/PB may be useful as a functional benchmark for dual general-purpose amplification, although it should not be released as a substitution without checking supply range, offset, bias current, noise, output swing, and stability. Because TS932AIN is obsolete, use the Request a Quote form for current legacy inventory, and require engineering approval for any proposed alternate.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TS932AID TS932AIDT LM2902N/PB
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments
Amplifier Circuits 2 circuits 2 circuits 2 circuits 2 circuits

Tasarım Notları

Use the manufacturer pin-description table when assigning the eight DIP connections. The TS932AIN contains two complete amplifiers but only one pair of supply pins, so both channels share the same positive and negative rails. Keep the two feedback networks separate and route each output only to its intended load. If a board change from DIP to SO-8 is considered, treat it as a layout redesign rather than a drop-in conversion because the lead pattern and body dimensions differ.

Confirm the device's supported supply range and total supply current before selecting the bypass network. Place a suitable low-ESR bypass capacitor close to the positive supply pin and return its ground path directly to the device ground connection. Because the TS932AIN is a dual amplifier, both channels share supply pins; excessive output loading or inadequate rail decoupling can therefore affect both channels simultaneously.

Keep each feedback loop physically short and use the lowest practical source resistance at the non-inverting input. The 100 kHz gain-bandwidth product makes the TS932AIN suitable for slow signals, but high gain combined with excessive parasitic capacitance can reduce stability or alter bandwidth. Check the manufacturer stability guidance for the intended noise gain and keep sensitive input nodes away from output and supply-return paths.

Do not treat every dual 8-pin amplifier as a substitute for the TS932AIN. Rail-to-rail output, 100 kHz bandwidth, micropower operation, input bias, offset, noise, common-mode range, and output swing all affect interchangeability. Also distinguish the through-hole TS932AIN from related surface-mount TS932AID variants; changing package type requires a different PCB land pattern and careful assembly-process review.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

A distributor product listing explicitly identifies the exact TS932AIN as RoHS compliant. No additional compliance declarations are stated for the component.

İlgili Aramalar

TS932AIN datasheet TS932AIN pinout TS932AIN datasheet pdf TS932AIN equivalent TS932AIN replacement TS932AIN DIP-8 TS932AIN 100 kHz op amp TS932AIN vs TS932AID TS932AIN rail to rail amplifier TS932AIN obsolete replacement TS932AIN price TS932AIN stock

İlgili Bileşenler ve Terimler

STMicroelectronics TS932AIN TS932AID TS932AIDT LM2902N/PB dual operational amplifier general-purpose amplifier voltage-feedback amplifier rail-to-rail output amplifier micropower operational amplifier gain-bandwidth product 100 kHz bandwidth 8-pin DIP through-hole package industrial temperature grade signal conditioning industrial instrumentation sensor interface feedback network bypass capacitor RoHS obsolete component
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle