XC5VLX50-2FFG324C - 46,080-Cell 1V Virtex-5 LX FPGA | AMD
MPN: XC5VLX50-2FFG324C ✗ Son Kullanım ZamanıXC5VLX50-2FFG324C Genel Bakış
A field-programmable gate array is a programmable logic device that combines configurable logic, block memory, programmable I/O, and dedicated hard resources on one semiconductor. The FPGA hierarchy places this device within the Virtex-5 LX family, which provides substantially more logic and memory capacity than small CPLDs while allowing board-level designs to be revised without changing the physical circuit. This combination makes it suitable for parallel processing, interface bridging, protocol termination, and embedded control functions.
Principal characteristics include 46,080 logic cells distributed across 3,600 CLBs, 1,769,472 bits of block RAM, 220 user I/O, and a nominal 1 V core supply. The 19 mm by 19 mm 324-ball FCBGA package supports high-density connections between the FPGA and surrounding circuitry. The package and its exposed-ball layout also make accurate PCB escape routing, via assignment, and power-plane continuity important parts of an FPGA layout.
The -2 suffix identifies the device performance grade. This grade is intended for designs requiring more timing performance than the -1 grade while retaining the same XC5VLX50 logic, memory, and I/O organization. Comparable family members differ principally in speed grade or temperature-market designation; design substitution therefore requires checking the active bitstream timing constraints, clocking architecture, I/O standards, and pinout against the selected replacement rather than relying only on the package name.
Typical uses include industrial networking, telecommunications interface equipment, instrumentation, test systems, embedded signal processing, and high-speed data acquisition. The 220 available I/O are valuable when a design must connect multiple buses, converters, memories, clocks, and control signals. Its logic and RAM resources can implement parallel datapaths, protocol state machines, packet buffering, and host-interface functions in a single programmable device.
PCB design should use the official Virtex-5 package pinout files when assigning every ball and locating dedicated configuration pins. The BGA footprint requires controlled via geometry, appropriate escape routing, and multiple power connections to meet simultaneous switching and configuration-current requirements. Board validation should also include configuration startup, clock stability, JTAG access, and voltage checks before the design depends on the configured logic.
This product page combines the confirmed Virtex-5 LX resource and package details with practical guidance for FPGA selection, footprint validation, and drop-in family comparison. It also separates package-compatible options from changes that require a different speed grade or operating-market designation, helping engineers preserve board-level constraints while planning an assembly revision.
Drop-in alternatifler için XC5VLX50-2FFG324C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC5VLX50-2FFG324C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package, Core Supply Voltage, Mounting Type, Speed Grade.
XC5VLX50-2FFG324I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VLX50-3FFG324C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC5VLX50-3FFG324I
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC5VLX50-1FFG324C
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VLX50-1FFG324I
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VLX50-2FFG324C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Virtex-5 LX Field Programmable Gate Array |
| Logic Cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs |
| Total RAM | 1,769,472 bits |
| User I/O | 220 I/O |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Nominal Supply Voltage | 1 V |
| Paket | 324-pin FCBGA |
| Package Type | FC-BGA |
| Package Dimensions | 19 mm x 19 mm |
| Performance Grade | -2 |
| I/O Type | Programmable user I/O |
| Montaj Türü | Surface Mount |
XC5VLX50-2FFG324C 19 mm x 19 mm Pin Yapısı Kılavuzu
XC5VLX50-2FFG324C (19 mm x 19 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC5VLX50-2FFG324C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC5VLX50-2FFG324C için uygundur 6 uygulamas: Industrial Networking Interfaces, High-Speed Data Acquisition, Test and Measurement Systems, Protocol Bridging and Bus Conversion, Embedded Signal Processing, Aerospace and Defense Control Logic.
Industrial Networking Interfaces
The XC5VLX50-2FFG324C fits industrial networking equipment that must combine several packet-processing paths with multiple external interfaces. Its 46,080 logic cells support parallel datapaths, framing logic, and protocol state machines, while 1,769,472 RAM bits provide useful buffering for burst traffic. The 220 I/O allow direct connection to transceivers, packet processors, memories, management controllers, and status interfaces. With a 0.95 V to 1.05 V core supply and the -2 performance grade, the device provides a practical balance of capacity and timing capability for line-card or gateway designs, subject to thermal and industrial-temperature qualification.
Önerilen
High-Speed Data Acquisition
The XC5VLX50-2FFG324C is suited to acquisition systems that must convert parallel or high-rate data into a processed representation. Its 3,600 CLBs and 1,769,472 RAM bits can support sampling pipelines, digital filtering, channel multiplexing, and temporary capture buffers. The 220 user I/O provide enough connectivity for multiple converters, clocks, triggers, memory interfaces, and data sinks without relying exclusively on an external processor. The -2 grade provides a timing-oriented selection for data paths, but the design must establish clock-domain relationships and verify acquisition timing against the selected external components.
Önerilen
Test and Measurement Systems
The XC5VLX50-2FFG324C can implement flexible timing, sequencing, and signal-conditioning logic in automated test equipment. Its 46,080 logic cells allow concurrent pattern generation, measurement control, and instrument-bus management, while the large block RAM supports capture buffers and look-up tables. The 220 I/O are useful for connecting test heads, programmable sources, counters, trigger logic, and communications controllers. Because the device is a mature FPGA family, engineers can also compare the -1, -2, and -3 grades to balance timing margin against cost and availability for a specific production program.
Önerilen
Protocol Bridging and Bus Conversion
The XC5VLX50-2FFG324C is well suited to bridging dissimilar interfaces where concurrent state machines and narrow data conversion paths are required. With 46,080 logic cells and 3,600 CLBs, it can host multiple independent protocol engines, while 1,769,472 RAM bits support buffering between devices operating at different rates. Its 220 I/O can accommodate address, data, control, clock, and interrupt signals across several interfaces. The 65 nm CMOS device operates from a 0.95 V to 1.05 V supply, simplifying integration with contemporary FPGA power trees, provided that I/O voltage standards and clock timing are selected independently from the core supply.
Önerilen
Embedded Signal Processing
The XC5VLX50-2FFG324C can implement parallel signal-processing functions such as digital filtering, correlation, modulation, and spectrum analysis. Its 46,080 logic cells allow multiple arithmetic pipelines to operate concurrently, and its 1,769,472 RAM bits can hold coefficients, sample windows, and intermediate results. The 220 I/O give a design practical access to ADC and DAC devices, parallel buses, and synchronization inputs. The -2 performance grade is appropriate when clock frequency and setup-and-hold margins are central to the architecture, although final timing closure must use the complete design constraints and the selected package files.
Önerilen
Aerospace and Defense Control Logic
The XC5VLX50-2FFG324C can serve as a programmable control element in aerospace, defense, and ruggedized industrial subsystems where deterministic logic and extensive I/O are valuable. Its 3,600 CLBs, 46,080 logic cells, and 1,769,472 RAM bits allow redundant control paths, health monitoring, and data transformation to coexist in one device. The 220 I/O support integration with sensors, actuators, memory, and communication equipment. Selection for a flight application must include a separate review of radiation, temperature, qualification, and traceability requirements; the commercial device designation alone does not establish suitability for every aerospace program.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC5VLX50-2FFG324C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC5VLX50-2FFG324I | XC5VLX50-3FFG324C | XC5VLX50-3FFG324I | XC5VLX50-1FFG324C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs |
| Total RAM | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits |
| User I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Performance Grade | -2 | -2 | -3 | -3 | -1 |
| Temperature-Market Designation | Commercial C suffix | Industrial I suffix | Commercial C suffix | Industrial I suffix | Commercial C suffix |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
Ana Farklılayıcılar
- Mid-range -2 performance grade within the XC5VLX50 family (karşılaştırma:XC5VLX50-1FFG324C)
- Commercial-temperature configuration for standard equipment (karşılaştırma:XC5VLX50-2FFG324I)
- Higher -3 performance option in a package-compatible family (karşılaştırma:XC5VLX50-3FFG324C)
Tasarım Notları
Build the board from the official Virtex-5 package pinout files rather than reconstructing the 324-ball assignment from a generic BGA drawing. Confirm each configuration, clock, power, ground, and user-I/O ball, then compare the constraints file against the physical layout. The FCBGA's dense escape-routing requirement makes package-code errors costly to correct after fabrication, particularly when changing between commercial and industrial suffixes that appear electrically close but still require complete verification.
Design the core supply for the documented 0.95 V to 1.05 V range and treat startup, configuration, and normal-operation current as separate power conditions. Follow the AMD and Xilinx recommended power architecture, including local high-frequency decoupling, adequate supply-plane connections, and controlled ramp behavior. The exact current limits and decoupling values must be taken from the device documentation for the selected speed and temperature grade rather than inferred from the 1 V nominal value.
Plan the 19 mm by 19 mm FCBGA escape routing to balance via count, solder-mask and paste behavior, and access to power and ground balls. Keep sensitive clock routes short and isolate high-current switching paths where practical. Provide a continuous return path beneath signal transitions and use the manufacturer's via and plane guidance because simultaneous switching can affect both timing and power integrity. Validate the final stack-up and escape topology with signal-integrity and power-integrity analysis.
Do not substitute the target solely because another XC5VLX50 variant uses a 324-ball package. Compare the speed-grade suffix, commercial versus industrial temperature designation, configuration behavior, I/O standards, and exact manufacturer pinout. Also distinguish FFG324 ordering codes from related non-FFG package variants. A valid board-level drop-in decision depends on both mechanical compatibility and timing closure under the replacement device's constraints.
Uyumluluk Bilgisi
Compliance status was not stated in the device documentation used for this record. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed for the exact lot and manufacturer documentation before environmental or regulatory qualification.