XC5VLX50-2FFG324C - 46,080-Cell 1V Virtex-5 LX FPGA | AMD
부품 번호: XC5VLX50-2FFG324C ✗ 단종XC5VLX50-2FFG324C 개요
A field-programmable gate array is a programmable logic device that combines configurable logic, block memory, programmable I/O, and dedicated hard resources on one semiconductor. The FPGA hierarchy places this device within the Virtex-5 LX family, which provides substantially more logic and memory capacity than small CPLDs while allowing board-level designs to be revised without changing the physical circuit. This combination makes it suitable for parallel processing, interface bridging, protocol termination, and embedded control functions.
Principal characteristics include 46,080 logic cells distributed across 3,600 CLBs, 1,769,472 bits of block RAM, 220 user I/O, and a nominal 1 V core supply. The 19 mm by 19 mm 324-ball FCBGA package supports high-density connections between the FPGA and surrounding circuitry. The package and its exposed-ball layout also make accurate PCB escape routing, via assignment, and power-plane continuity important parts of an FPGA layout.
The -2 suffix identifies the device performance grade. This grade is intended for designs requiring more timing performance than the -1 grade while retaining the same XC5VLX50 logic, memory, and I/O organization. Comparable family members differ principally in speed grade or temperature-market designation; design substitution therefore requires checking the active bitstream timing constraints, clocking architecture, I/O standards, and pinout against the selected replacement rather than relying only on the package name.
Typical uses include industrial networking, telecommunications interface equipment, instrumentation, test systems, embedded signal processing, and high-speed data acquisition. The 220 available I/O are valuable when a design must connect multiple buses, converters, memories, clocks, and control signals. Its logic and RAM resources can implement parallel datapaths, protocol state machines, packet buffering, and host-interface functions in a single programmable device.
PCB design should use the official Virtex-5 package pinout files when assigning every ball and locating dedicated configuration pins. The BGA footprint requires controlled via geometry, appropriate escape routing, and multiple power connections to meet simultaneous switching and configuration-current requirements. Board validation should also include configuration startup, clock stability, JTAG access, and voltage checks before the design depends on the configured logic.
This product page combines the confirmed Virtex-5 LX resource and package details with practical guidance for FPGA selection, footprint validation, and drop-in family comparison. It also separates package-compatible options from changes that require a different speed grade or operating-market designation, helping engineers preserve board-level constraints while planning an assembly revision.
드롭인 대체품: XC5VLX50-2FFG324C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC5VLX50-2FFG324C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, Core Supply Voltage, Mounting Type, Speed Grade.
XC5VLX50-2FFG324I
✅ 드롭인가격 문의
데이터시트 보기 →XC5VLX50-3FFG324C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC5VLX50-3FFG324I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC5VLX50-1FFG324C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC5VLX50-1FFG324I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC5VLX50-2FFG324C 최대 정격 & 전기적 특성
| Device Type | Virtex-5 LX Field Programmable Gate Array |
| Logic Cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs |
| Total RAM | 1,769,472 bits |
| User I/O | 220 I/O |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Nominal Supply Voltage | 1 V |
| 패키지 | 324-pin FCBGA |
| Package Type | FC-BGA |
| Package Dimensions | 19 mm x 19 mm |
| Performance Grade | -2 |
| I/O Type | Programmable user I/O |
| 실장 유형 | Surface Mount |
XC5VLX50-2FFG324C 19 mm x 19 mm 핀 구성 가이드
XC5VLX50-2FFG324C(19 mm x 19 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC5VLX50-2FFG324C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC5VLX50-2FFG324C 적합 용도: 6 애플리케이션s: Industrial Networking Interfaces, High-Speed Data Acquisition, Test and Measurement Systems, Protocol Bridging and Bus Conversion, Embedded Signal Processing, Aerospace and Defense Control Logic.
Industrial Networking Interfaces
The XC5VLX50-2FFG324C fits industrial networking equipment that must combine several packet-processing paths with multiple external interfaces. Its 46,080 logic cells support parallel datapaths, framing logic, and protocol state machines, while 1,769,472 RAM bits provide useful buffering for burst traffic. The 220 I/O allow direct connection to transceivers, packet processors, memories, management controllers, and status interfaces. With a 0.95 V to 1.05 V core supply and the -2 performance grade, the device provides a practical balance of capacity and timing capability for line-card or gateway designs, subject to thermal and industrial-temperature qualification.
추천
High-Speed Data Acquisition
The XC5VLX50-2FFG324C is suited to acquisition systems that must convert parallel or high-rate data into a processed representation. Its 3,600 CLBs and 1,769,472 RAM bits can support sampling pipelines, digital filtering, channel multiplexing, and temporary capture buffers. The 220 user I/O provide enough connectivity for multiple converters, clocks, triggers, memory interfaces, and data sinks without relying exclusively on an external processor. The -2 grade provides a timing-oriented selection for data paths, but the design must establish clock-domain relationships and verify acquisition timing against the selected external components.
추천
Test and Measurement Systems
The XC5VLX50-2FFG324C can implement flexible timing, sequencing, and signal-conditioning logic in automated test equipment. Its 46,080 logic cells allow concurrent pattern generation, measurement control, and instrument-bus management, while the large block RAM supports capture buffers and look-up tables. The 220 I/O are useful for connecting test heads, programmable sources, counters, trigger logic, and communications controllers. Because the device is a mature FPGA family, engineers can also compare the -1, -2, and -3 grades to balance timing margin against cost and availability for a specific production program.
추천
Protocol Bridging and Bus Conversion
The XC5VLX50-2FFG324C is well suited to bridging dissimilar interfaces where concurrent state machines and narrow data conversion paths are required. With 46,080 logic cells and 3,600 CLBs, it can host multiple independent protocol engines, while 1,769,472 RAM bits support buffering between devices operating at different rates. Its 220 I/O can accommodate address, data, control, clock, and interrupt signals across several interfaces. The 65 nm CMOS device operates from a 0.95 V to 1.05 V supply, simplifying integration with contemporary FPGA power trees, provided that I/O voltage standards and clock timing are selected independently from the core supply.
추천
Embedded Signal Processing
The XC5VLX50-2FFG324C can implement parallel signal-processing functions such as digital filtering, correlation, modulation, and spectrum analysis. Its 46,080 logic cells allow multiple arithmetic pipelines to operate concurrently, and its 1,769,472 RAM bits can hold coefficients, sample windows, and intermediate results. The 220 I/O give a design practical access to ADC and DAC devices, parallel buses, and synchronization inputs. The -2 performance grade is appropriate when clock frequency and setup-and-hold margins are central to the architecture, although final timing closure must use the complete design constraints and the selected package files.
추천
Aerospace and Defense Control Logic
The XC5VLX50-2FFG324C can serve as a programmable control element in aerospace, defense, and ruggedized industrial subsystems where deterministic logic and extensive I/O are valuable. Its 3,600 CLBs, 46,080 logic cells, and 1,769,472 RAM bits allow redundant control paths, health monitoring, and data transformation to coexist in one device. The 220 I/O support integration with sensors, actuators, memory, and communication equipment. Selection for a flight application must include a separate review of radiation, temperature, qualification, and traceability requirements; the commercial device designation alone does not establish suitability for every aerospace program.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC5VLX50-2FFG324C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC5VLX50-2FFG324I | XC5VLX50-3FFG324C | XC5VLX50-3FFG324I | XC5VLX50-1FFG324C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA | 324-pin FCBGA |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs |
| Total RAM | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits |
| User I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Performance Grade | -2 | -2 | -3 | -3 | -1 |
| Temperature-Market Designation | Commercial C suffix | Industrial I suffix | Commercial C suffix | Industrial I suffix | Commercial C suffix |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
주요 차별점
- Mid-range -2 performance grade within the XC5VLX50 family (vs XC5VLX50-1FFG324C)
- Commercial-temperature configuration for standard equipment (vs XC5VLX50-2FFG324I)
- Higher -3 performance option in a package-compatible family (vs XC5VLX50-3FFG324C)
설계 노트
Build the board from the official Virtex-5 package pinout files rather than reconstructing the 324-ball assignment from a generic BGA drawing. Confirm each configuration, clock, power, ground, and user-I/O ball, then compare the constraints file against the physical layout. The FCBGA's dense escape-routing requirement makes package-code errors costly to correct after fabrication, particularly when changing between commercial and industrial suffixes that appear electrically close but still require complete verification.
Design the core supply for the documented 0.95 V to 1.05 V range and treat startup, configuration, and normal-operation current as separate power conditions. Follow the AMD and Xilinx recommended power architecture, including local high-frequency decoupling, adequate supply-plane connections, and controlled ramp behavior. The exact current limits and decoupling values must be taken from the device documentation for the selected speed and temperature grade rather than inferred from the 1 V nominal value.
Plan the 19 mm by 19 mm FCBGA escape routing to balance via count, solder-mask and paste behavior, and access to power and ground balls. Keep sensitive clock routes short and isolate high-current switching paths where practical. Provide a continuous return path beneath signal transitions and use the manufacturer's via and plane guidance because simultaneous switching can affect both timing and power integrity. Validate the final stack-up and escape topology with signal-integrity and power-integrity analysis.
Do not substitute the target solely because another XC5VLX50 variant uses a 324-ball package. Compare the speed-grade suffix, commercial versus industrial temperature designation, configuration behavior, I/O standards, and exact manufacturer pinout. Also distinguish FFG324 ordering codes from related non-FFG package variants. A valid board-level drop-in decision depends on both mechanical compatibility and timing closure under the replacement device's constraints.
규정 준수 정보
Compliance status was not stated in the device documentation used for this record. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed for the exact lot and manufacturer documentation before environmental or regulatory qualification.