AMD

XC5VLX50-2FFG324C - 46,080-Cell 1V Virtex-5 LX FPGA | AMD

N.º de pieza: XC5VLX50-2FFG324C ✗ Fin de vida
0.95 V to 1.05 V Vdss 324-pin FCBGA Package
MOQ: 1 |

XC5VLX50-2FFG324C Descripción general

The AMD Xilinx XC5VLX50-2FFG324C is a Virtex-5 LX field-programmable gate array built on 65 nm CMOS, with 46,080 logic cells, 3,600 configurable logic blocks, 1,769,472 RAM bits, and 220 I/O in a 324-pin FCBGA package. It operates from a 0.95 V to 1.05 V supply and is identified by the -2 performance grade in its part number.

A field-programmable gate array is a programmable logic device that combines configurable logic, block memory, programmable I/O, and dedicated hard resources on one semiconductor. The FPGA hierarchy places this device within the Virtex-5 LX family, which provides substantially more logic and memory capacity than small CPLDs while allowing board-level designs to be revised without changing the physical circuit. This combination makes it suitable for parallel processing, interface bridging, protocol termination, and embedded control functions.

Principal characteristics include 46,080 logic cells distributed across 3,600 CLBs, 1,769,472 bits of block RAM, 220 user I/O, and a nominal 1 V core supply. The 19 mm by 19 mm 324-ball FCBGA package supports high-density connections between the FPGA and surrounding circuitry. The package and its exposed-ball layout also make accurate PCB escape routing, via assignment, and power-plane continuity important parts of an FPGA layout.

The -2 suffix identifies the device performance grade. This grade is intended for designs requiring more timing performance than the -1 grade while retaining the same XC5VLX50 logic, memory, and I/O organization. Comparable family members differ principally in speed grade or temperature-market designation; design substitution therefore requires checking the active bitstream timing constraints, clocking architecture, I/O standards, and pinout against the selected replacement rather than relying only on the package name.

Typical uses include industrial networking, telecommunications interface equipment, instrumentation, test systems, embedded signal processing, and high-speed data acquisition. The 220 available I/O are valuable when a design must connect multiple buses, converters, memories, clocks, and control signals. Its logic and RAM resources can implement parallel datapaths, protocol state machines, packet buffering, and host-interface functions in a single programmable device.

PCB design should use the official Virtex-5 package pinout files when assigning every ball and locating dedicated configuration pins. The BGA footprint requires controlled via geometry, appropriate escape routing, and multiple power connections to meet simultaneous switching and configuration-current requirements. Board validation should also include configuration startup, clock stability, JTAG access, and voltage checks before the design depends on the configured logic.

This product page combines the confirmed Virtex-5 LX resource and package details with practical guidance for FPGA selection, footprint validation, and drop-in family comparison. It also separates package-compatible options from changes that require a different speed grade or operating-market designation, helping engineers preserve board-level constraints while planning an assembly revision.

Alternativas directas para XC5VLX50-2FFG324C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XC5VLX50-2FFG324C (mismo factor de forma y huella) — difiere en Device Type, Package, Core Supply Voltage, Mounting Type, Speed Grade.

AMD
Device Type: Virtex-5 LX field-programmable gate array (FPGA)
Package: 324-BBGA FCBGA
Core Supply Voltage: 1 V nominal
Comparar con XC5VLX50-2FFG324C →
Xilinx
Core Supply Voltage: 1 V
Speed Grade: -1
Comparar con XC5VLX50-2FFG324C →
AMD
Device Type: Virtex-5 LX field-programmable gate array
Speed Grade: -2
Comparar con XC5VLX50-2FFG324C →
AMD
Device Type: Virtex-5 LX field-programmable gate array (FPGA)
Package: 324-BBGA FCBGA, 19 mm x 19 mm
Comparar con XC5VLX50-2FFG324C →

XC5VLX50-2FFG324I

✅ Sustitución directa
AMD
📦 324-pin FCBGA
Virtex-5 LX field-programmable gate array · 46,080 cells · 3,600 LABs/CLBs · 1,769,472 bits · 220 pins · 324-pin FCBGA · 65 nm CMOS · 1 V

Consulte el precio

Ver hoja de datos →

XC5VLX50-3FFG324C

✅ Sustitución directa
📦 324-pin FCBGA
Same logic, RAM, I/O, and FFG324 package; -3 replaces the -2 performance grade, giving an approximately 90% parameter match.

📋 Alternativa de referencia (no en el catálogo)

XC5VLX50-3FFG324I

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 324-pin FCBGA
Same XC5VLX50 resources and FFG324 package; -3 performance grade and I industrial-temperature designation differ from -2 commercial, with an approximately 80% match.

📋 Alternativa de referencia (no en el catálogo)

XC5VLX50-1FFG324C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
AMD
📦 324-pin FCBGA
Virtex-5 LX FPGA · 46,080 cells · 3,600 CLBs · 1,769,472 bits · 48 slices · 220 I/Os · 65 nm CMOS · 1 V

Consulte el precio

Ver hoja de datos →

XC5VLX50-1FFG324I

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Xilinx
📦 324-pin FCBGA
Field-Programmable Gate Array (FPGA) · Virtex-5 LX · 46,080 cells · 3,600 CLBs · 1,769,472 bits · 220 I/Os · 65 nm CMOS · 1 V

Consulte el precio

Ver hoja de datos →

XC5VLX50-2FFG324C Valores máximos y características eléctricas

Device Type Virtex-5 LX Field Programmable Gate Array
Logic Cells 46,080 cells
Configurable Logic Blocks 3,600 CLBs
Total RAM 1,769,472 bits
User I/O 220 I/O
Process Technology 65 nm CMOS
Core Supply Voltage 0.95 V to 1.05 V
Nominal Supply Voltage 1 V
Encapsulado 324-pin FCBGA
Package Type FC-BGA
Package Dimensions 19 mm x 19 mm
Performance Grade -2
I/O Type Programmable user I/O
Tipo de montaje Surface Mount

Guía de configuración de pines de XC5VLX50-2FFG324C 19 mm x 19 mm

Configuración de pines para XC5VLX50-2FFG324C (encapsulado 19 mm x 19 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 19 mm x 19 mm para XC5VLX50-2FFG324C

No hay datos detallados de patillaje disponibles para XC5VLX50-2FFG324C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC5VLX50-2FFG324C es adecuado para 6 aplicacións: Industrial Networking Interfaces, High-Speed Data Acquisition, Test and Measurement Systems, Protocol Bridging and Bus Conversion, Embedded Signal Processing, Aerospace and Defense Control Logic.

🌐

Industrial Networking Interfaces

The XC5VLX50-2FFG324C fits industrial networking equipment that must combine several packet-processing paths with multiple external interfaces. Its 46,080 logic cells support parallel datapaths, framing logic, and protocol state machines, while 1,769,472 RAM bits provide useful buffering for burst traffic. The 220 I/O allow direct connection to transceivers, packet processors, memories, management controllers, and status interfaces. With a 0.95 V to 1.05 V core supply and the -2 performance grade, the device provides a practical balance of capacity and timing capability for line-card or gateway designs, subject to thermal and industrial-temperature qualification.

📺

High-Speed Data Acquisition

The XC5VLX50-2FFG324C is suited to acquisition systems that must convert parallel or high-rate data into a processed representation. Its 3,600 CLBs and 1,769,472 RAM bits can support sampling pipelines, digital filtering, channel multiplexing, and temporary capture buffers. The 220 user I/O provide enough connectivity for multiple converters, clocks, triggers, memory interfaces, and data sinks without relying exclusively on an external processor. The -2 grade provides a timing-oriented selection for data paths, but the design must establish clock-domain relationships and verify acquisition timing against the selected external components.

🖥️

Test and Measurement Systems

The XC5VLX50-2FFG324C can implement flexible timing, sequencing, and signal-conditioning logic in automated test equipment. Its 46,080 logic cells allow concurrent pattern generation, measurement control, and instrument-bus management, while the large block RAM supports capture buffers and look-up tables. The 220 I/O are useful for connecting test heads, programmable sources, counters, trigger logic, and communications controllers. Because the device is a mature FPGA family, engineers can also compare the -1, -2, and -3 grades to balance timing margin against cost and availability for a specific production program.

🔧

Protocol Bridging and Bus Conversion

The XC5VLX50-2FFG324C is well suited to bridging dissimilar interfaces where concurrent state machines and narrow data conversion paths are required. With 46,080 logic cells and 3,600 CLBs, it can host multiple independent protocol engines, while 1,769,472 RAM bits support buffering between devices operating at different rates. Its 220 I/O can accommodate address, data, control, clock, and interrupt signals across several interfaces. The 65 nm CMOS device operates from a 0.95 V to 1.05 V supply, simplifying integration with contemporary FPGA power trees, provided that I/O voltage standards and clock timing are selected independently from the core supply.

⚡

Embedded Signal Processing

The XC5VLX50-2FFG324C can implement parallel signal-processing functions such as digital filtering, correlation, modulation, and spectrum analysis. Its 46,080 logic cells allow multiple arithmetic pipelines to operate concurrently, and its 1,769,472 RAM bits can hold coefficients, sample windows, and intermediate results. The 220 I/O give a design practical access to ADC and DAC devices, parallel buses, and synchronization inputs. The -2 performance grade is appropriate when clock frequency and setup-and-hold margins are central to the architecture, although final timing closure must use the complete design constraints and the selected package files.

✈️

Aerospace and Defense Control Logic

The XC5VLX50-2FFG324C can serve as a programmable control element in aerospace, defense, and ruggedized industrial subsystems where deterministic logic and extensive I/O are valuable. Its 3,600 CLBs, 46,080 logic cells, and 1,769,472 RAM bits allow redundant control paths, health monitoring, and data transformation to coexist in one device. The 220 I/O support integration with sensors, actuators, memory, and communication equipment. Selection for a flight application must include a separate review of radiation, temperature, qualification, and traceability requirements; the commercial device designation alone does not establish suitability for every aerospace program.

What are the key specifications of XC5VLX50-2FFG324C?
The XC5VLX50-2FFG324C is a Virtex-5 LX FPGA with 46,080 logic cells, 3,600 CLBs, 1,769,472 RAM bits, and 220 user I/O. It uses 65 nm CMOS, operates from 0.95 V to 1.05 V, and is supplied in a 324-pin FCBGA package. According to the AMD and Xilinx device documentation, the -2 suffix denotes the performance grade. These figures establish the device's principal capacity, power-supply, and package constraints.
Where can I download the XC5VLX50-2FFG324C datasheet?
The XC5VLX50-2FFG324C datasheet is available through the linked AMD device documentation and the Virtex-5 package-pinout resources. The manufacturer resources provide the authoritative electrical tables, configuration information, package details, and ball assignments. Use the package files in ASCII format to verify every PCB connection because the part has 324 package balls. The product page also links to an accessible PDF copy of the device documentation for engineers who prefer a standalone document.
Where can I find the XC5VLX50-2FFG324C pinout?
The XC5VLX50-2FFG324C pinout is published in the AMD Virtex-5 package-device pinout files. These manufacturer files contain the package ball assignments in ASCII text format and are intended for direct comparison with the PCB footprint and constraint file. Check configuration, clock, power, ground, and user I/O balls against the exact device suffix before assigning signals. A 324-ball footprint alone does not establish functional compatibility among different speed or temperature-market variants.
What is the XC5VLX50-2FFG324C used for?
The XC5VLX50-2FFG324C is used for programmable logic, parallel processing, data acquisition, protocol bridging, and embedded control designs that require substantial FPGA resources. Its 46,080 logic cells and 1,769,472 RAM bits support concurrent datapaths and buffering, while 220 I/O provide connections to external memories, converters, buses, and control signals. According to AMD and Xilinx device information, the device belongs to the high-density Virtex-5 LX family.
What is the difference between XC5VLX50-2FFG324C and XC5VLX50-3FFG324C?
The principal difference is the performance-grade suffix: XC5VLX50-2FFG324C uses the -2 grade, while XC5VLX50-3FFG324C uses the -3 grade. Both retain the XC5VLX50 device organization, including 46,080 logic cells and 1,769,472 RAM bits, and use the 324-pin FFG package. The comparison supports an approximately 90% parameter match, but timing constraints and the replacement device's speed grade must still be checked before reuse.
What is the difference between XC5VLX50-2FFG324C and XC5VLX50-2FFG324I?
The XC5VLX50-2FFG324C is the commercial-market designation, while XC5VLX50-2FFG324I carries the industrial-temperature designation. Their -2 performance grade and XC5VLX50 resource organization are otherwise aligned for a close drop-in assessment. The important selection criterion is the required ambient-temperature range of the installed equipment. Confirm the exact temperature limits and pin assignments in the manufacturer documentation before treating them as interchangeable.
When should I choose XC5VLX50-2FFG324C over XC5VLX50-1FFG324C?
Choose XC5VLX50-2FFG324C when a design needs the -2 performance grade rather than the -1 grade while retaining the same XC5VLX50 logic, memory, and 324-pin FFG organization. Both parts provide 46,080 logic cells, 3,600 CLBs, 1,769,472 RAM bits, and 220 I/O. The approximately 90% parameter match makes the family relationship strong, but timing-sensitive designs should compare the relevant clock and I/O timing specifications rather than assuming identical timing.
Is XC5VLX50-2FFG324C suitable for industrial control and networking equipment?
The XC5VLX50-2FFG324C is technically suitable for industrial control and networking functions that fit its 46,080 logic cells, 1,769,472 RAM bits, and 220 I/O. Its 0.95 V to 1.05 V core supply and 65 nm CMOS implementation support modern FPGA power architectures. For installed industrial equipment, also verify the required ambient-temperature grade; use the I suffix when the enclosure and operating conditions require the industrial-temperature option.
What is the best drop-in replacement for XC5VLX50-2FFG324C?
The closest package-compatible replacements are other XC5VLX50-2FFG324 speed- and temperature-grade variants, including XC5VLX50-2FFG324I and the -1 or -3 grade devices in the same FFG324 package. They preserve the 324-ball footprint and XC5VLX50 resource organization, supporting 70% to 90% assessed parameter matches. No verified cross-brand drop-in equivalent was identified. Confirm timing, temperature, configuration behavior, and the exact manufacturer pinout before replacement.
Can XC5VLX50-2FFG324I replace XC5VLX50-2FFG324C?
XC5VLX50-2FFG324I can serve as a close drop-in candidate because it retains the XC5VLX50-2 performance level and 324-pin FFG package while changing the commercial designation to the industrial-temperature option. The assessed parameter match is approximately 90% because the device resource organization and electrical class remain aligned. Confirm that the industrial-temperature variant satisfies the target ambient range and that the exact ball assignments match the existing PCB.
What can replace XC5VLX50-2FFG324C in an existing PCB design?
A drop-in replacement should use a 324-pin FFG XC5VLX50 device with compatible power, configuration, clock, and user-I/O assignments. Confirmed family options include XC5VLX50-2FFG324I, XC5VLX50-1FFG324C, and XC5VLX50-3FFG324C, with XC5VLX50-3FFG324I adding the industrial-temperature designation. The package match supports board reuse, but the design must be checked for timing, thermal, and operating-temperature differences before production use.
Is XC5VLX50-2FFG324C the same as XC5VLX50-1FF324C?
The XC5VLX50-2FFG324C and XC5VLX50-1FF324C are related FPGA variants, but they are not fully interchangeable without review. The visible specifications identify both as Virtex-5 LX devices with 46,080 logic cells, 3,600 CLBs, 1,769,472 RAM bits, and 220 I/O in a 324-pin package. The -2 and -1 suffixes designate different performance grades, and the FFG package code should also be checked against the board footprint and manufacturer pinout files.
Where to buy XC5VLX50-2FFG324C online?
Use the Request a Quote form on this page to request XC5VLX50-2FFG324C availability, current lead time, and minimum order quantity. Because this is a mature Virtex-5 LX FPGA, supply can depend on legacy inventory, lot traceability, and assembly requirements. State the required package, commercial or industrial temperature grade, quantity, and inspection level in the request so the quoted configuration matches the intended replacement.
What is the price of XC5VLX50-2FFG324C?
The current price for XC5VLX50-2FFG324C is provided through the Request a Quote form on this page. The structured pricing fields reflect any currently verifiable unit-price evidence rather than an estimated market value. For a legacy FPGA, a quote should also specify whether the requirement is new surplus, factory-sealed material, or an approved alternative, because those conditions can affect traceability and lead time.
What is the lead time and stock status for XC5VLX50-2FFG324C?
Current XC5VLX50-2FFG324C stock and lead time should be confirmed through the Request a Quote form on this page. No customer-facing stock conclusion should be drawn from a distributor search result alone because legacy FPGA inventory can change by lot, package marking, and shipment status. Include the target quantity and required delivery date in the request, along with any traceability or date-code restrictions required by the system.
Is XC5VLX50-2FFG324C in stock?
XC5VLX50-2FFG324C availability is confirmed on a quotation basis through the Request a Quote form on this page. The exact answer can depend on whether the requirement is for the commercial -2 grade or the industrial -2 grade, as well as inspection, traceability, and delivery constraints. Submit the complete MPN and quantity to obtain a current stock response instead of relying on a generic Virtex-5 LX availability statement.
How do I design the power and layout for XC5VLX50-2FFG324C?
Design the XC5VLX50-2FFG324C power system for a 0.95 V to 1.05 V core supply and use the manufacturer's package files to identify every configuration, power, ground, clock, and user-I/O ball. The 19 mm by 19 mm FCBGA requires an escape-routing strategy that preserves simultaneous-switching performance and adequate power and ground connectivity. Follow the recommended decoupling, via, and plane-construction guidance in the Virtex-5 design documentation, then verify the completed board's power integrity.
What is the best AMD/Xilinx equivalent for XC5VLX50-2FFG324C?
The best confirmed AMD/Xilinx equivalents are other XC5VLX50 devices in the 324-pin FFG package, particularly XC5VLX50-2FFG324I, XC5VLX50-1FFG324C, and XC5VLX50-3FFG324C. Their shared architecture produces assessed matches from 70% to 90% and allows reuse of the existing footprint. Choose according to required speed and temperature grade. No cross-brand device was verified as both pin-to-pin and parametrically equivalent, so it is not recommended as a direct drop-in replacement.

Datos de referencia de ingeniería para XC5VLX50-2FFG324C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose XC5VLX50-2FFG324C when the design specifically calls for the XC5VLX50 architecture, a -2 performance grade, 46,080 logic cells, 3,600 CLBs, 1,769,472 RAM bits, 220 I/O, and the 324-pin FCBGA footprint. Select XC5VLX50-2FFG324I when the same electrical performance and resource layout are required but the operating environment calls for the industrial-temperature designation. Consider XC5VLX50-1FFG324C when its lower speed grade satisfies timing margins, or XC5VLX50-3FFG324C when the higher -3 grade is needed and available. The -1 and -3 I-suffix combinations support different speed and temperature combinations. All listed alternatives share the package, but a valid substitution still requires comparison of timing constraints, temperature requirements, configuration behavior, and the exact manufacturer ball assignments.

Comparación con alternativas

Parámetro Este producto XC5VLX50-2FFG324I XC5VLX50-3FFG324C XC5VLX50-3FFG324I XC5VLX50-1FFG324C
Brand AMD AMD AMD AMD AMD
Package 324-pin FCBGA 324-pin FCBGA 324-pin FCBGA 324-pin FCBGA 324-pin FCBGA
Logic Cells 46,080 cells 46,080 cells 46,080 cells 46,080 cells 46,080 cells
Configurable Logic Blocks 3,600 CLBs 3,600 CLBs 3,600 CLBs 3,600 CLBs 3,600 CLBs
Total RAM 1,769,472 bits 1,769,472 bits 1,769,472 bits 1,769,472 bits 1,769,472 bits
User I/O 220 I/O 220 I/O 220 I/O 220 I/O 220 I/O
Core Supply Voltage 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V
Performance Grade -2 -2 -3 -3 -1
Temperature-Market Designation Commercial C suffix Industrial I suffix Commercial C suffix Industrial I suffix Commercial C suffix
Process Technology 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS

Diferenciadores clave

  • Mid-range -2 performance grade within the XC5VLX50 family (frente a XC5VLX50-1FFG324C)
  • Commercial-temperature configuration for standard equipment (frente a XC5VLX50-2FFG324I)
  • Higher -3 performance option in a package-compatible family (frente a XC5VLX50-3FFG324C)

Notas de diseño

Build the board from the official Virtex-5 package pinout files rather than reconstructing the 324-ball assignment from a generic BGA drawing. Confirm each configuration, clock, power, ground, and user-I/O ball, then compare the constraints file against the physical layout. The FCBGA's dense escape-routing requirement makes package-code errors costly to correct after fabrication, particularly when changing between commercial and industrial suffixes that appear electrically close but still require complete verification.

Design the core supply for the documented 0.95 V to 1.05 V range and treat startup, configuration, and normal-operation current as separate power conditions. Follow the AMD and Xilinx recommended power architecture, including local high-frequency decoupling, adequate supply-plane connections, and controlled ramp behavior. The exact current limits and decoupling values must be taken from the device documentation for the selected speed and temperature grade rather than inferred from the 1 V nominal value.

Plan the 19 mm by 19 mm FCBGA escape routing to balance via count, solder-mask and paste behavior, and access to power and ground balls. Keep sensitive clock routes short and isolate high-current switching paths where practical. Provide a continuous return path beneath signal transitions and use the manufacturer's via and plane guidance because simultaneous switching can affect both timing and power integrity. Validate the final stack-up and escape topology with signal-integrity and power-integrity analysis.

Do not substitute the target solely because another XC5VLX50 variant uses a 324-ball package. Compare the speed-grade suffix, commercial versus industrial temperature designation, configuration behavior, I/O standards, and exact manufacturer pinout. Also distinguish FFG324 ordering codes from related non-FFG package variants. A valid board-level drop-in decision depends on both mechanical compatibility and timing closure under the replacement device's constraints.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status was not stated in the device documentation used for this record. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed for the exact lot and manufacturer documentation before environmental or regulatory qualification.

Búsquedas relacionadas

xc5vlx50 1ffg676c XC5VLX50-2FFG324C datasheet XC5VLX50-2FFG324C specifications XC5VLX50-2FFG324C pinout XC5VLX50-2FFG324C footprint XC5VLX50-2FFG324C equivalent XC5VLX50-2FFG324C replacement XC5VLX50-2FFG324C price XC5VLX50-2FFG324C stock AMD XC5VLX50-2FFG324C XC5VLX50-2FFG324C vs XC5VLX50-3FFG324C XC5VLX50 324 FCBGA FPGA XC5VLX50-2FFG324C power supply Virtex-5 LX 46080 logic cells

Componentes & términos relacionados

AMD Xilinx XC5VLX50-2FFG324C XC5VLX50-2FFG324I XC5VLX50-3FFG324C XC5VLX50-3FFG324I XC5VLX50-1FFG324C XC5VLX50-1FFG324I Virtex-5 LX field-programmable gate array FPGA programmable logic device semiconductor configurable logic block CLB block RAM 220 user I/O 65 nm CMOS 324-pin FCBGA FC-BGA surface-mount package 0.95 V to 1.05 V core supply JTAG configuration industrial networking data acquisition signal processing
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ