XC7A200T-L1FBG676I - 215K Logic Cell Artix-7 FPGA | AMD
MPN: XC7A200T-L1FBG676I ✓ AktifXC7A200T-L1FBG676I Genel Bakış
A field-programmable gate array is a semiconductor whose digital functionality is defined after manufacture through configuration files rather than fixed mask patterns. Within the FPGA hierarchy, the Artix-7 family sits between the cost-focused 7-series devices and larger programmable-logic and SoC families. This makes the XC7A200T appropriate for industrial control, communications infrastructure, industrial Ethernet, test equipment, video processing, and embedded systems where programmable logic must be combined with substantial parallel digital throughput.
The XC7A200T family provides 215,360 logic cells and up to 400 user I/O in the FBG676 configuration. Its architecture supports high-speed serial transceivers, digital signal processing, and programmable logic blocks, allowing one device to implement parallel data paths, control logic, protocol bridges, and interface termination. The L1 ordering designation identifies the device's low-power speed and temperature profile, while the FBG676 code identifies the 676-ball package and I/O arrangement. The I suffix identifies the industrial temperature grade.
Compared with a fixed-function ASIC, the FPGA allows field-updatable logic, shorter product-development cycles, and design changes without respinning silicon. Compared with a microcontroller, the Artix-7 fabric offers parallel processing resources, dedicated block RAM, DSP slices, and high-speed serial transceivers. The trade-off is higher unit cost, lower power efficiency for repetitive workloads, and a longer verification effort because both hardware timing and the complete RTL design must be validated.
Board designers should use the AMD package pinout files and UG475 when assigning the 676 BGA balls. Power planning must include separate treatment for core, auxiliary, I/O, and transceiver supply rails, with local decoupling placed directly beneath the relevant device pins. Differential pairs should preserve the reference-design stack-up and controlled impedance, especially for high-speed serial links.
This page consolidates family-level technical information, package details, sourcing guidance, drop-in alternatives, and practical FPGA design considerations into a single engineering reference for the XC7A200T-L1FBG676I.
Drop-in alternatifler için XC7A200T-L1FBG676I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC7A200T-L1FBG676I (aynı form faktörü ve ayağa oturma) — farklı olan Package, Device Type, Logic Cells, Block RAM, Mounting Type.
XC7A200T-1FBG676I
✅ Yerleştirme✓ Stokta
$390 / Birim
Veri Şablonunu Görüntüle →XC7A200T-2FBG676I
✅ Yerleştirme✓ Stokta
$100 / Birim
Veri Şablonunu Görüntüle →XC7A200T-3FBG676E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7A200T-1FBG676C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7A200T-1FB676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7K410T-2FBG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7K160T-1FBG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7K410T-1FBG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7A200T-L1FBG676I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 215,360 logic cells |
| User I/O | 400 I/O |
| Package Type | 676-ball flip-chip BGA (FBG676) |
| Terminal Count | 676 terminals |
| Process Technology | 28 nm lithography |
| Programmable Logic Type | Artix-7 FPGA logic fabric |
| Speed Grade | L1 low-power speed grade |
| Temperature Grade | Industrial (I) |
| Montaj Türü | Surface mount, BGA |
XC7A200T-L1FBG676I 676-ball flip-chip bga (fbg676) Pin Yapısı Kılavuzu
XC7A200T-L1FBG676I (676-ball flip-chip bga (fbg676) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC7A200T-L1FBG676I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC7A200T-L1FBG676I için uygundur 6 uygulamas: Industrial Ethernet Protocol Bridge, Machine Vision Image Preprocessing, Programmable Logic Controller, Test and Measurement Instrumentation, Video Format Conversion, Aerospace and Defense Edge Processing.
Industrial Ethernet Protocol Bridge
The XC7A200T-L1FBG676I fits industrial Ethernet gateways that translate between multiple industrial protocols and a host processor. Its 215,360 logic cells can support parallel frame processing, checksum generation, packet classification, and custom MAC or PHY control logic, while 400 user I/O provide ample margin for management interfaces and status signals. The L1 profile favors lower-power operation where fanless cooling and sustained industrial duty are important. Design the interface clocking deterministically, keep transceiver reference-clock routing symmetric, and validate signal integrity against the selected board stack-up before production release.
Önerilen
Machine Vision Image Preprocessing
The XC7A200T-L1FBG676I is suitable for front-end image preprocessing in machine-vision controllers, where parallel pixel data must be conditioned before transfer to a processor or memory subsystem. Its large Artix-7 fabric can implement pipelines, line buffers, thresholding, color-format conversion, and synchronization logic in parallel. The 400 I/O count supports wide parallel sensor interfaces without requiring a companion programmable-logic device. Keep high-speed pixel routing on matched layers, use source-synchronous clocking where supported by the sensor interface, and budget memory bandwidth carefully before assigning frame-buffer resources.
Önerilen
Programmable Logic Controller
The XC7A200T-L1FBG676I can implement a high-channel-count programmable logic controller for machinery, process equipment, and safety-oriented control systems. Its 215,360 logic cells allow deterministic parallel control, motion sequencing, and multi-axis timing to coexist with communication interfaces. The 400 user I/O support substantial digital input, output, encoder, and interlock connectivity. For robust operation, separate fast safety functions from general-purpose application logic, constrain critical paths explicitly, and test configuration corruption recovery. The industrial I suffix aligns with environments where temperature resilience and long product availability are important.
Önerilen
Test and Measurement Instrumentation
The XC7A200T-L1FBG676I is well suited to modular test equipment because programmable acquisition logic, pattern generation, timing control, and interface conversion can be consolidated in one device. Its large logic fabric supports parallel channels and reusable instrument architectures, while high-speed serial resources can connect to external converters or test ports. Use the device for deterministic sequencing, but separate acquisition, trigger, and communication domains with explicit clock-domain-crossing constraints. A stable reference clock, low-jitter clock distribution, and carefully controlled impedance are essential when driving precision analog and mixed-signal test modules.
Önerilen
Video Format Conversion
The XC7A200T-L1FBG676I can implement video timing generation, pixel-format conversion, scaling, overlay, and interface bridging in professional or industrial display equipment. Its 215,360 logic cells provide the parallel datapath capacity needed to combine multiple video streams, while 400 user I/O support wide parallel interfaces and control logic. The Artix-7 family's DSP and programmable-logic resources allow filtering and color-space operations to be pipelined without a fixed-function controller. Constrain pixel-clock paths by interface hierarchy, place video input and output registers close to their assigned pins, and validate horizontal and vertical blanking behavior across all supported video modes.
Önerilen
Aerospace and Defense Edge Processing
The XC7A200T-L1FBG676I can support edge-processing, telemetry, and sensor-fusion functions in aerospace, drone, and rugged embedded systems where programmable logic provides flexibility during integration. The 215,360 logic cells and 400 I/O allow multiple sensor channels, data conditioning, and communication links to be consolidated. Because the exact ordering code combines an L1 profile with an industrial suffix, qualification for a flight program must be handled as a separate approval activity rather than inferred from the family name. Review radiation, temperature, vibration, and procurement requirements with the program authority, then validate clock, power, and recovery behavior under the complete environmental profile.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC7A200T-L1FBG676I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC7A200T-1FBG676I | XC7A200T-2FBG676I | XC7A200T-3FBG676E | XC7A200T-1FBG676C |
|---|---|---|---|---|---|
| Package | FBG676, 676-ball flip-chip BGA | FBG676, 676-ball flip-chip BGA | FBG676, 676-ball flip-chip BGA | FBG676, 676-ball flip-chip BGA | FBG676, 676-ball flip-chip BGA |
| Brand | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 | 215,360 | 215,360 | 215,360 | 215,360 |
| User I/O | 400 | 400 | 400 | 400 | 400 |
| Speed or Profile Code | L1 low-power profile | -1 standard speed | -2 speed | -3 speed | -1 speed |
| Temperature Suffix | I industrial | I industrial | I industrial | E expanded | C commercial |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Ana Farklılayıcılar
- Low-power ordering profile within the high-density Artix-7 family (karşılaştırma:XC7A200T-1FBG676I)
- Industrial temperature designation for the target ordering code (karşılaştırma:XC7A200T-1FBG676C)
- Same-package route for speed-profile optimization (karşılaştırma:XC7A200T-2FBG676I)
- Substantial logic and I/O capacity in a single Artix-7 device (karşılaştırma:XC7K160T-1FBG676I)
Tasarım Notları
Create separate power budgets for the core, auxiliary, I/O, and transceiver rails rather than treating the device as having one supply input. Place the largest low-frequency decoupling capacitance at the power-entry point and smaller high-frequency capacitors directly beneath the associated package balls. Follow the AMD power-guide recommendations for each rail and verify steady-state plus transient current against the selected utilization and transceiver activity. The L1 profile can reduce the performance-versus-power trade-off, but it does not eliminate the need for rail-by-rail validation.
Reserve exposed-board thermal-via structures beneath the 676-ball BGA and quantify the junction-temperature rise using the actual PCB area, copper layers, via geometry, airflow, and ambient temperature. Start with the AMD Artix-7 power estimation tools, then confirm the design on hardware because configuration, clocking, I/O slew, and transceiver loading materially affect dissipation. A fanless enclosure can still be viable with the L1 profile, but only after thermal margin has been demonstrated with the worst-case workload.
Use AMD's FBG676 package pinout files and the Vivado implementation constraints for every ball assignment. Keep configuration, clock, and dedicated transceiver pins aligned with the documented reference layouts, and preserve the recommended spacing and escape-routing conventions for the 676-ball footprint. Because this package has hundreds of connections, compare the final ball map against the board file and use independent third-party inspection on the first production articles to detect mirrored or shifted footprints.
High-speed serial links depend on a controlled-impedance stack-up, continuous reference planes, and matched length treatment that includes package and connector effects in the channel budget. Route high-speed pairs as tightly coupled differential pairs without plane splits, vias, or stubs where avoidable. Keep clocks away from noisy I/O and transceiver return paths, and apply source-synchronous output constraints when driving external devices. Validate eye diagrams, jitter, and compliance in hardware because schematic connectivity alone does not establish signal integrity.
Do not substitute an XC7A200T ordering option solely because the package code matches. Compare the speed or L-profile code, temperature suffix, timing tables, power characteristics, and qualification requirements. A standard -1 device is not automatically equivalent to an L1 device, and a commercial C suffix is not equivalent to an industrial I suffix. After any change, rerun synthesis, implementation, timing analysis, power estimation, and bitstream generation, then perform hardware configuration and interface regression tests.
Uyumluluk Bilgisi
Compliance declarations were not explicitly identified in the device-specific product pages. The I suffix identifies an industrial temperature grade, not an AEC-Q100 qualification. Obtain current environmental and quality declarations for the exact ordering code during procurement review.