XC7A75T - Artix-7 FPGA 75K Logic Cells, 6.6Gb/s | AMD
MPN: XC7A75T ✓ AktifXC7A75T Genel Bakış
An FPGA (Field-Programmable Gate Array) is a programmable logic device configured after manufacturing to implement arbitrary digital logic. Within the semiconductor hierarchy, FPGAs sit between ASICs and general-purpose processors, offering reconfigurability, parallel processing, and rapid prototyping. The Artix-7 family is AMD's lowest-power, lowest-cost 28nm FPGA line, optimized for highest performance per watt with integrated analog mixed-signal (AMS) capability.
Key differentiating features include DSP48E1 slices for high-speed arithmetic, an XADC dual 12-bit ADC for on-chip temperature and voltage monitoring, support for LVCMOS, LVDS, and HSTL I/O standards, and GTP transceivers supporting PCIe, Gigabit Ethernet, and Serial RapidIO protocols.
Architecturally, the device comprises configurable logic blocks (CLBs) of 6-input LUTs and flip-flops, column-based block RAM, and dedicated clocking fabric. The 28nm process reduces dynamic power versus older 40nm/65nm generations, while bitstream encryption protects IP. Configuration is supported via JTAG, SPI, or BPI flash.
Typical applications include software-defined radio (baseband processing with high-speed ADC/DAC interfacing), motor control, medical imaging, and industrial networking where moderate logic density plus 6.6 Gb/s serial connectivity is required at low cost.
Design tip: implement with the Vivado Design Suite, decouple each VCCO/VCCAUX pin with 100nF ceramics, and follow UG475/UG482 layout guidelines for transceiver routing. Pricing below reflects distributor data as of 2026-08-29.
Drop-in alternatifler için XC7A75T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC7A75T (aynı form faktörü ve ayağa oturma) — farklı olan Block RAM, Design Software, I/O Standards, Process Technology.
XC7A75T-2FGG484I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XA7A75T-1FGG484Q
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC7A100T-1FGG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7A50T-1FGG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7A100T-2FGG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7A75T Maksimum Değerlendirmeler & Elektriksel Özellikler
| Logic Cells | 75520 |
| Block RAM | 1800 Kb |
| Clock Management Tiles (CMT) | 5 (MMCM + PLL each) |
| GTP Transceivers | 6 |
| Transceiver Line Rate | up to 6.6 Gb/s |
| Maximum User I/O | 285 |
| Process Technology | 28 nm HKMG |
| Total CLB Flip-Flops | 92080 |
| Packages Available | FGG484, FTG256, FGG400, CSG324, CPG236 |
| I/O Standards | LVCMOS, LVDS, HSTL and others |
| XADC | Dual 12-bit ADC for temperature/voltage monitoring |
| Configuration Interfaces | JTAG, SPI, BPI |
| Design Software | Vivado Design Suite |
| Montaj Türü | Surface Mount (BGA) |
| Family | Artix-7 |
| RoHS Durumu | Compliant |
XC7A75T fgg484, ftg256, fgg400, csg324, cpg236 Pin Yapısı Kılavuzu
XC7A75T (fgg484, ftg256, fgg400, csg324, cpg236 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC7A75T.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC7A75T için uygundur 6 uygulamas: Software-Defined Radio, Industrial Motor Control, Medical Imaging Front-End, Industrial Networking and Protocol Bridging, Test and Measurement Instruments, Aerospace and Defense Processing.
Software-Defined Radio
The XC7A75T's 6 GTP transceivers at up to 6.6 Gb/s provide the serial bandwidth needed to stream samples from JESD204B-class ADCs and DACs, while 75,520 logic cells and DSP48E1 slices implement digital down-conversion, channel filtering, and modulation. The 1,800 Kb block RAM buffers IQ data, and 5 MMCMs generate the multiple synchronous clock domains SDR architectures require, all at 28nm-class low power.
Önerilen
Industrial Motor Control
In multi-axis motor drives, the XC7A75T implements parallel PWM engines, encoder interfaces, and current-loop math in DSP48E1 slices with deterministic sub-microsecond latency that microcontrollers cannot match. Its LVCMOS and LVDS I/Os connect directly to gate drivers and absolute encoders, while the XADC monitors board temperature and supply rails. Transceiver capability links the drive to industrial Ethernet backbones.
Önerilen
Medical Imaging Front-End
Ultrasound and digital X-ray chains rely on the XC7A75T to aggregate high-speed serial ADC data over its 6.6 Gb/s GTP transceivers, apply beamforming and matched filtering in DSP48E1 slices, and buffer frames in 1,800 Kb of block RAM. The 28nm process keeps thermal load low inside sealed diagnostic enclosures, and XADC-based monitoring supports system self-test required in medical equipment.
Önerilen
Industrial Networking and Protocol Bridging
The XC7A75T's GTP transceivers implement PCIe, Gigabit Ethernet, and Serial RapidIO, making it a protocol bridge between legacy fieldbus interfaces implemented in fabric and modern high-speed backbones. With 75,520 logic cells, multiple MACs and protocol stacks coexist in one device, while 285 user I/Os (FGG484) connect to relays, sensors, and HMI peripherals without external glue logic.
Önerilen
Test and Measurement Instruments
Bench instruments and modular (PXI-style) cards use the XC7A75T for real-time triggering, pattern generation, and capture logic with deterministic timing from its 5 MMCM/PLL clock tiles. The 6.6 Gb/s transceivers interface to high-speed data paths, and 75,520 logic cells implement protocol-aware digital test cores. Bitstream encryption protects proprietary instrument firmware in the field.
Önerilen
Aerospace and Defense Processing
For SWaP-constrained avionics and defense payloads, the XA-grade variants of the XC7A75T deliver extended-temperature operation with the same die. The fabric implements sensor interfaces, pre-processing pipelines, and secure configuration with bitstream encryption. GTP transceivers handle high-rate telemetry links, and the 28nm performance/watt advantage maximizes compute within tight power budgets.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC7A75T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC7A75T-2FGG484I | XA7A75T-1FGG484Q | XC7A100T-1FGG484C | XC7A50T-1FGG484C |
|---|---|---|---|---|---|
| Package | FCBGA-484 (FGG484) | FCBGA-484 (FGG484) - same | FCBGA-484 (FGG484) - same | FCBGA-484 (FGG484) - same | FCBGA-484 (FGG484) - same |
| Brand | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) |
| Logic Cells | 75520 | 75520 | 75520 | 101440 | 53128 |
| Block RAM | 1800 Kb | 1800 Kb | 1800 Kb | 2188 Kb | 1350 Kb |
| GTP Transceivers | 6 @ 6.6 Gb/s | 6 @ 6.6 Gb/s | 6 @ 6.6 Gb/s | 6 @ 6.6 Gb/s | 4 @ 6.6 Gb/s |
| Speed Grade | -1 (varies by order code) | -2 (faster) | -1 (XA grade) | -1 | -1 |
| Temperature Grade | Commercial/Industrial (per suffix) | Industrial (-40 to +100C) | Extended (XA/Q) | Commercial | Commercial |
Ana Farklılayıcılar
- Best cost/performance balance point (karşılaştırma:XC7A100T-1FGG484C)
- Faster timing closure headroom available (karşılaştırma:XC7A75T-1FGG484C)
- Extended temperature qualification (karşılaştırma:XC7A75T commercial variants)
Tasarım Notları
Decouple every VCCO, VCCAUX, and VCCINT ball with 100nF ceramic capacitors placed within 2mm of the device, plus bulk 47uF+ per rail. Use AMD's XPower Analyzer with your post-implementation netlist to size the core rail; VCCINT current on 28nm Artix-7 can vary 3x between idle and toggling designs. Follow the power sequencing in the 7-series configuration guide (VCCINT before VCCO) to avoid configuration faults.
Route the six GTP transceiver pairs as 100-ohm differential pairs on solid reference planes with no stubs; follow UG482 for AC coupling and reference clock jitter budget (use a low-jitter oscillator, e.g., sub-1ps RMS for 6.6 Gb/s links). Keep GTP lanes away from switching regulator nodes and configure IBIS/IBIS-AMI models in SI simulation before layout release.
Not all FGG484 devices have identical usable I/O banks - XC7A50T in FGG484 leaves some banks unpopulated versus XC7A75T/XC7A100T. When migrating between densities on the same footprint, re-check pin assignment legality in Vivado I/O Planning before committing the PCB. Also confirm configuration flash compatibility (SPI vs BPI) and bitstream encryption key management early.
Uyumluluk Bilgisi
RoHS compliance per AMD product listings. XA-grade variants serve automotive-adjacent extended-temperature uses but standard XC7A75T is not AEC-Q100 qualified.
