AMD

XC7K355T-L2FFG901I - 356K Logic Kintex-7 FPGA | AMD

MPN: XC7K355T-L2FFG901I ✓ Aktif
0.97 V to 1.03 V Vdss 900-BBGA FCBGA Package L2 Speed
MOQ: 1 |

XC7K355T-L2FFG901I Genel Bakış

The AMD XC7K355T-L2FFG901I is a Kintex-7 field-programmable gate array with 356,160 logic cells, 26,357,760 RAM bits, and 300 user I/O in a 900-BBGA FCBGA package. It belongs to the FPGA hierarchy: programmable logic device > FPGA > Kintex-7 > XC7K355T. The device combines configurable logic, programmable digital signal processing resources, block RAM, programmable I/O, and dedicated clocking resources on one monolithic device.

An FPGA is a semiconductor whose digital function is defined after manufacture by loading a configuration bitstream. Unlike a fixed-function ASIC, an FPGA permits revisions, parallel interface adaptation, and hardware customization without fabricating a new chip. The XC7K355T family is positioned for demanding communications, industrial, instrumentation, high-performance signal-processing, and embedded-control systems where logic density and I/O bandwidth are more important than very low unit cost.

The XC7K355T device provides 356,160 configurable logic cells, 27,825 logic blocks, and 26,357,760 RAM bits. Its 300 user I/O support board-level connections to processors, memory devices, converters, network transceivers, and external test equipment. The -L2 designation identifies a lower-power-oriented speed grade within the Kintex-7 family, while the industrial temperature option extends the operating junction-temperature range from -40°C to 100°C.

The device supports a broad, parallel programmable architecture that can implement multiple data paths simultaneously. Designers can distribute arithmetic and control logic across the fabric, use dedicated RAM for buffering, and configure I/O standards through dedicated resources. This architecture is useful when a design requires concurrent channels, flexible timing, or interfaces that are not economically supported by a conventional microcontroller.

Typical applications include high-speed data acquisition, communications infrastructure, industrial control, test and measurement, signal processing, and embedded video or imaging systems. The large logic and RAM resources can support parallel data paths, protocol adaptation, digital filtering, and control functions without combining several lower-complexity programmable devices.

A 900-BBGA package requires careful PCB design, including controlled impedance routing, dense via structures, adequate power-plane connectivity, and thermal management. Confirm the exact pin assignments and bank voltage requirements against the AMD package pinout files and UG475 before schematic capture or PCB layout.

This page combines the device configuration, package details, replacement analysis, and practical design guidance needed to evaluate the XC7K355T-L2FFG901I for an existing Kintex-7 platform.

Drop-in alternatifler için XC7K355T-L2FFG901I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller XC7K355T-L2FFG901I (aynı form faktörü ve ayağa oturma) — farklı olan Block RAM, Device Type, Logic Cells, Package, Mounting Type.

AMD
Package: 900-BBGA, FCBGA
Mounting Type: SMD
İle Karşılaştır XC7K355T-L2FFG901I →
AMD
Block RAM: 30,060 Kb
Device Type: Field Programmable Gate Array (FPGA)
Logic Cells: 416,960 cells
İle Karşılaştır XC7K355T-L2FFG901I →
AMD
Block RAM: 34,380 Kb
Device Type: Kintex-7 Field-Programmable Gate Array
Logic Cells: 477,760 cells
İle Karşılaştır XC7K355T-L2FFG901I →

XC7K355T-1FFG901I

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 900-BBGA FF901
Uygun spesifikasyonlar

Fiyat için iletişime geçin

XC7K355T-2FFG901I

✅ Yerleştirme
AMD
📦 900-BBGA FF901
Kintex-7 · 356160 · 27825 · 26357760 · 300 · 0.97 V ~ 1.03 V · -40°C ~ 100°C (TJ) · 900-BBGA, FCBGA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7K355T-3FFG901I

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 900-BBGA FF901
Uses the -3 speed grade rather than the target L2 grade; it trades lower-power characteristics for a different timing and power grade

📋 Katalogda Olmayan Referans Alternatifi

XC7K420T-2FFG901C

✅ Yerleştirme
AMD
📦 900-BBGA FF901
Kintex-7 · Field Programmable Gate Array (FPGA) · 416,960 cells · 30,781,440 bits · 30,060 Kb · 380 I/O · 28 nm · 1 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7K480T-2FFG901C

✅ Yerleştirme
AMD
📦 900-BBGA FF901
Kintex-7 Field-Programmable Gate Array · 477,760 cells · 37,325 CLBs · 34,380 Kb · 35,205,120 bits · 1,920 slices · 380 I/O · 28 nm

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7K355T-L2FFG901I Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type Kintex-7 Field-Programmable Gate Array (FPGA)
Logic Cells 356,160 cells
Logic Blocks 27,825 LABs/CLBs
Block RAM 26,357,760 bits
User I/O Count 300 I/Os
Core Supply Voltage Range 0.97 V to 1.03 V
İşletim Jant Sıcaklığı -40°C to 100°C
Paket 900-BBGA FCBGA
Montaj Türü Surface Mount
Device Family Kintex-7 XC7K355T
Speed Grade L2
Temperature Grade Industrial

XC7K355T-L2FFG901I 900-bbga fcbga Pin Yapısı Kılavuzu

XC7K355T-L2FFG901I (900-bbga fcbga paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

900-bbga fcbga paket pin çizelgesi için XC7K355T-L2FFG901I

Ayrıntılı pin çıkış verisi mevcut değil: XC7K355T-L2FFG901I.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

XC7K355T-L2FFG901I için uygundur 6 uygulamas: High-Speed Data Acquisition, Communications Signal Processing, Industrial Control Platform, Test and Measurement Instrumentation, Parallel Digital Filtering, Aerospace and Defense Control Systems.

⚡

High-Speed Data Acquisition

The XC7K355T-L2FFG901I fits parallel data-acquisition systems that need flexible buffering, timing, and digital correction. Its 356,160 logic cells can organize multiple converter channels, while 26,357,760 RAM bits support parallel sample storage, packetization, and preprocessing. The 300 user I/O provide connections for converters, clock sources, trigger logic, and data-processing elements. A practical design routes each converter into a timed capture pipeline, stores blocks in RAM, and transfers processed results through a high-speed serial interface. The L2 grade is attractive when reducing dynamic and static power is important, although the final power budget depends on selected I/O standards, switching activity, configuration, clocking, and the -2L operating-voltage limits documented by AMD.

🌐

Communications Signal Processing

The XC7K355T-L2FFG901I supports communications signal-processing designs that require parallel channels and flexible interface adaptation. The 356,160 logic cells can implement filters, correlators, protocol state machines, and packet transformations concurrently, while the 26,357,760 RAM bits accommodate channel buffers and temporary working data. With 300 user I/O, the device can connect directly to transceivers, parallel network processors, and timing-distribution circuits. Engineers commonly use clock-management resources to establish deterministic sampling paths and separate high-speed data from control logic. Compared with a smaller FPGA, the XC7K355T provides more parallelism without moving to the largest Kintex-7 members. The L2 speed and power grade must be checked against the required interface timing, and board-level channel loss, skew, and return loss should be simulated with the actual transceiver and package model.

🏭

Industrial Control Platform

The XC7K355T-L2FFG901I is suitable for an industrial control platform that combines deterministic motion control, machine I/O, diagnostics, and communications. Its 356,160 logic cells allow supervisory control, protocol conversion, and timing functions to run alongside dedicated data pipelines, while 26,357,760 RAM bits can support history buffers and event logging. The 300 I/O accommodate encoders, sensor interfaces, actuators, industrial networks, and status signals. The industrial suffix provides a specified -40°C to 100°C junction-temperature range for the device family, making it suitable for controlled industrial equipment when the system thermal design remains within limits. Use the AMD pinout files to assign I/O standards and bank power correctly, isolate noisy industrial interfaces, and include watchdogs or redundant safety controls above the FPGA when required by the machine-risk assessment.

🔧

Test and Measurement Instrumentation

The XC7K355T-L2FFG901I can implement programmable test and measurement logic when product functionality must change without a new ASIC. The large FPGA fabric supports parallel acquisition engines, pattern generation, real-time analysis, and protocol-specific test sequences, while the 26,357,760 RAM bits provide storage for captured waveforms and intermediate results. Its 300 user I/O allow connection to analog converters, trigger generators, reference clocks, and digital test ports. A typical instrument uses a timed acquisition pipeline, FPGA-based filtering, and a data-transfer engine feeding a host processor. The L2 profile is useful when the instrument has a restricted thermal envelope, but switching activity and I/O toggling can dominate actual power. Validate acquisition timing with the selected converters, include clock uncertainty in the timing budget, and use the package pinout and UG475 to implement the 900-BBGA escape routing correctly.

📡

Parallel Digital Filtering

The XC7K355T-L2FFG901I is well suited to parallel digital filtering because 356,160 logic cells can implement multiple independent lanes, and 26,357,760 RAM bits support sample delay lines, coefficient storage, and overlap buffers. A design can distribute decimation, interpolation, correlation, or spectrum-processing stages across the fabric and use dedicated RAM for predictable throughput. The 300 user I/O provide parallel input and output channels for converters or DSP devices. Compared with a sequential processor implementation, the FPGA architecture can sustain multiple lanes concurrently while keeping the processing latency under direct control. Resource sharing can reduce logic use but may lower throughput or complicate timing closure. Validate arithmetic precision against the intended filter response, constrain all paths at the selected operating speed, and simulate the complete data path rather than evaluating only the filter coefficients.

✈️

Aerospace and Defense Control Systems

The XC7K355T-L2FFG901I can support configurable control, monitoring, and data-processing functions in aerospace, defense, and rugged embedded systems. Its programmable fabric permits implementation of multiple control channels, sensor fusion stages, protocol bridges, and health-monitoring functions, while 26,357,760 RAM bits support local buffering. The industrial temperature suffix specifies a -40°C to 100°C junction-temperature range, but the device is not automatically qualified for every aerospace program. Qualification, reliability, radiation, security, and procurement requirements must be evaluated independently. Engineers should establish a requirements traceability matrix, verify the exact ordering code, assess single-event effects where applicable, and complete worst-case power and timing analysis. The 900-BBGA package also demands controlled assembly processes, inspection, and thermal analysis appropriate to the mission environment.

What is the AMD XC7K355T-L2FFG901I?
The AMD XC7K355T-L2FFG901I is a Kintex-7 FPGA containing 356,160 logic cells, 26,357,760 RAM bits, and 300 user I/O in a 900-BBGA FCBGA package. According to the AMD Kintex-7 documentation, the XC7K355T family combines configurable logic, block RAM, programmable I/O, and dedicated clocking resources. The L2 speed grade targets reduced power operating points, while the industrial suffix supports a junction-temperature range of -40°C to 100°C.
What are the key specifications of XC7K355T-L2FFG901I that engineers should know?
The XC7K355T-L2FFG901I provides 356,160 logic cells, 27,825 logic blocks, 26,357,760 RAM bits, and 300 user I/O. Its 900-BBGA FCBGA package uses a core supply range of 0.97 V to 1.03 V, and its industrial temperature option specifies a junction-temperature range from -40°C to 100°C. The L2 grade is positioned for lower static and dynamic power than the ordinary -2 grade when suitable operating conditions are used.
Where can I download the XC7K355T-L2FFG901I datasheet PDF?
The XC7K355T-L2FFG901I datasheet can be obtained through the linked AMD documentation and the Octopart datasheet page. The product is part of the Kintex-7 family, so the manufacturer datasheet describes the DS181 Kintex-7 data sheet, while UG475 covers package pinouts, bank architecture, and device details. Use the AMD package pinout files to verify every 900-BBGA signal before laying out the board.
Where can I find the XC7K355T-L2FFG901I pinout?
The XC7K355T-L2FFG901I pinout is found in the AMD Kintex-7 package device pinout files, with package information documented in UG475. The device uses the 900-BBGA FF901 package and exposes 300 user I/O. Do not infer a complete signal list from the I/O count: each ball may carry a user I/O, supply, ground, configuration, clock, or other dedicated function. Use the package CSV or ASCII files during schematic and PCB verification.
Is the XC7K355T-L2FFG901I suitable for high-speed signal processing?
The XC7K355T-L2FFG901I is suitable for parallel high-speed signal processing because it combines 356,160 logic cells with 26,357,760 RAM bits and 300 user I/O. These resources allow multiple filtering, correlation, packet-processing, or data-formatting pipelines to operate concurrently. Actual interface performance depends on board-level signal integrity, selected I/O standards, clocking, timing constraints, and the external transceiver or converter selected for the design.
What is the difference between XC7K355T-L2FFG901I and XC7K355T-2FFG901I?
The principal documented distinction is the speed-grade designation: the XC7K355T-L2FFG901I uses the L2 grade, while the XC7K355T-2FFG901I uses the ordinary -2 grade. AMD describes the -2L devices as screened for lower maximum static power and capable of lower core voltages, which can reduce dynamic power compared with -2 devices. Both family members use the 900-BBGA FF901 package, but the exact replacement decision must include timing, power, temperature, and qualification review.
XC7K355T-L2FFG901I vs XC7K420T-2FFG901C - which is better for a control system?
Choose the XC7K355T-L2FFG901I when the design specifically needs its L2 speed grade, industrial temperature option, 356,160 logic cells, and 26,357,760 RAM bits. Choose the XC7K420T-2FFG901C when additional Kintex-7 capacity is useful and an ordinary -2 commercial-temperature grade is acceptable. AMD states that Kintex-7 devices in the FF901 package are pin-compatible, but a larger device can consume more power and may require different utilization, thermal, and timing planning.
XC7K355T-L2FFG901I vs XC7K480T-2FFG901C - which is better for parallel processing?
The XC7K355T-L2FFG901I is preferable when its L2 low-power-oriented grade and 356,160 logic cells provide enough parallel-processing capacity. The XC7K480T-2FFG901C offers a larger Kintex-7 implementation in the same FF901 package and may suit designs requiring more fabric, memory, and I/O capacity. It is not an automatic upgrade because power, timing closure, pin planning, and software configuration requirements can change substantially with the larger device.
When should I choose XC7K355T-L2FFG901I over another Kintex-7 device?
Choose the XC7K355T-L2FFG901I when the board must use the FF901 package, the L2 speed grade, the industrial temperature option, and approximately 356,000 logic cells with 26.3 million RAM bits. It is also appropriate when 300 user I/O are sufficient. Select a larger Kintex-7 option only when additional resources justify its increased power and complexity, or a different speed or temperature grade when the L2 profile does not match the system requirements.
Is XC7K355T-L2FFG901I suitable for industrial control and instrumentation?
The XC7K355T-L2FFG901I is suitable for many industrial control and instrumentation designs because its industrial temperature option specifies a -40°C to 100°C junction-temperature range and its 300 user I/O provide extensive board connectivity. The device can implement acquisition control, timing, protocol conversion, and parallel digital processing. System qualification still depends on the assembled board, enclosure temperature, power integrity, component choices, and the complete system thermal design.
What can replace XC7K355T-L2FFG901I?
A drop-in replacement should use the same 900-BBGA FF901 footprint and preserve the required Kintex-7 resources, voltage requirements, configuration behavior, and timing expectations. AMD confirms that XC7K355T, XC7K420T, and XC7K480T devices are pin-compatible in the FF901 package. Speed-grade, temperature-grade, resource, power, and timing differences still require engineering review, so a package-compatible part is not automatically a functional substitute without bitstream and timing validation.
What is the best AMD or Xilinx equivalent for XC7K355T-L2FFG901I?
The closest confirmed pin-compatible choices are other Kintex-7 devices in the FF901 package, including XC7K420T and XC7K480T variants, as AMD identifies those families as pin-compatible. For an exact L2 industrial-style replacement, other XC7K355T speed-grade options are the logical starting point. No cross-manufacturer drop-in equivalent is established here because an alternative FPGA would require validation of package balls, I/O standards, configuration, timing, and the existing design bitstream.
Can XC7K355T-2FFG901I replace XC7K355T-L2FFG901I?
The XC7K355T-2FFG901I can serve as a same-family, same-package candidate for the XC7K355T-L2FFG901I because both use the Kintex-7 XC7K355T device and 900-BBGA FF901 package. However, the -2 and L2 designations represent different speed and power operating grades. Review timing margins, power limits, temperature grade, qualification requirements, and bitstream constraints before treating the change as a drop-in substitution.
Where can I buy XC7K355T-L2FFG901I and what is its current lead time?
Use the Request a Quote form on this page to request the current XC7K355T-L2FFG901I price, stock position, minimum order quantity, and factory lead time. The linked distributor records show channels for the exact MPN, but they do not establish a uniform live inventory commitment. Current commercial terms can vary by package, quantity, traceability requirement, and production schedule, so obtain a written quotation before placing the production order.
How much does XC7K355T-L2FFG901I cost and is it in stock?
The current unit price and stock status for the XC7K355T-L2FFG901I should be obtained through the Request a Quote form on this page. Availability for a large 900-BBGA FPGA can change with order quantity, date code, traceability, and factory scheduling. Request the quantity, target date, inspection requirements, and required documentation with the quotation so the response reflects the actual production configuration.
What design checks are required for the XC7K355T-L2FFG901I power rails and PCB?
Verify every power rail against the AMD XC7K355T data sheet and UG475 before schematic completion, including the 0.97 V to 1.03 V core range shown for the device family, I/O bank voltages, sequencing, current limits, and decoupling requirements. A 900-BBGA design also needs dense escape routing, controlled-impedance layers, solid power and ground planes, via current-capacity checks, and thermal analysis. Perform signal-integrity and power-integrity simulations with the final stack-up and components.

Mühendislik referans verileri: XC7K355T-L2FFG901I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the XC7K355T-L2FFG901I when the design needs the Kintex-7 FF901 footprint, the lower-power-oriented L2 speed grade, the industrial temperature suffix, and approximately 356,000 logic cells with 26.3 million RAM bits. Select the XC7K355T-2FFG901I when its ordinary -2 performance and power profile are preferable and the industrial ordering option is acceptable. Choose the XC7K355T-1FFG901I only after confirming that its timing grade meets all interfaces; choose the -3 option when higher performance is required and its power implications are acceptable. Consider the XC7K420T-2FFG901C or XC7K480T-2FFG901C when the existing FF901 board needs more fabric, memory, or I/O capacity, but validate commercial-temperature operation and the higher power budget. For every alternative, rerun timing, resource utilization, thermal analysis, configuration generation, and hardware tests before replacement approval.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün XC7K355T-1FFG901I XC7K355T-2FFG901I XC7K355T-3FFG901I XC7K420T-2FFG901C XC7K480T-2FFG901C
Brand AMD AMD AMD AMD AMD AMD
Package 900-BBGA FF901 900-BBGA FF901 - same 900-BBGA FF901 - same 900-BBGA FF901 - same 900-BBGA FF901 - same 900-BBGA FF901 - same
Device Family Kintex-7 XC7K355T Kintex-7 XC7K355T Kintex-7 XC7K355T Kintex-7 XC7K355T Kintex-7 XC7K420T Kintex-7 XC7K480T
Speed Grade L2 -1 -2 -3 -2 -2
Temperature Suffix I - Industrial I - Industrial I - Industrial I - Industrial C - Commercial C - Commercial

Ana Farklılayıcılar

  • Lower-power-oriented L2 speed grade (karşılaştırma:XC7K355T-2FFG901I)
  • Industrial temperature ordering option (karşılaştırma:XC7K420T-2FFG901C)
  • Same FF901 package without larger-device overhead (karşılaştırma:XC7K480T-2FFG901C)
  • Kintex-7 resource allocation balanced for parallel processing (karşılaştırma:XC7K355T-1FFG901I)

Tasarım Notları

Treat the 900-BBGA package as a major thermal-design element. Place the device over a continuous power-and-ground-plane structure, provide through-hole thermal vias beneath the package where the footprint and assembly process permit, and avoid placing heat sources directly beneath the BGA. Calculate worst-case junction temperature from actual FPGA activity, configured I/O loading, board copper, enclosure temperature, and the board-level thermal model. Validate the result with the AMD power calculator and a physical thermal measurement before production release.

Use the AMD FF901 package pinout and recommended land pattern rather than a generic BGA footprint. Verify ball assignment, power grouping, configuration pins, clock-capable pins, and I/O bank boundaries before schematic sign-off. The 900-ball package requires a multilayer PCB with short, low-inductance power connections and adequate via arrays around major power and ground balls. Complete extraction, power-integrity, and signal-integrity simulations with the final layer stack-up, components, and memory interfaces.

Constrain every external interface at its actual interface rate rather than relying on a single device timing constraint. Apply board-specific timing exceptions only when justified by measured or simulated routing behavior. Check package and board channel loss, reflection, crosstalk, clock skew, and I/O supply-noise sensitivity. For memory or transceiver links, use the manufacturer’s IBIS or SPICE models when available and validate the board with measured eye patterns or compliance fixtures before releasing the FPGA bitstream.

Do not assume that the L2, -1, -2, or -3 ordering codes are interchangeable solely because the package matches. Review timing grade, voltage limits, static and dynamic power, junction-temperature limits, configuration behavior, and qualification requirements for every substitution. Likewise, do not assume that a larger XC7K420T or XC7K480T is a drop-in functional upgrade. Re-run synthesis, place-and-route, timing analysis, power estimation, bitstream generation, and hardware validation for the exact ordering code placed on the board.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer's ordering code and program-specific qualification requirements must be reviewed before making a compliance determination.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

xc7k355t 2ffg901i XC7K355T-L2FFG901I datasheet XC7K355T-L2FFG901I pinout XC7K355T-L2FFG901I equivalent XC7K355T-L2FFG901I replacement XC7K355T-L2FFG901I vs XC7K420T-2FFG901C XC7K355T-L2FFG901I vs XC7K480T-2FFG901C AMD XC7K355T-L2FFG901I XC7K355T-L2FFG901I 900 BBGA XC7K355T-L2FFG901I price XC7K355T-L2FFG901I stock XC7K355T-L2FFG901I signal processing

İlgili Bileşenler ve Terimler

AMD Xilinx XC7K355T-L2FFG901I XC7K355T-1FFG901I XC7K355T-2FFG901I XC7K355T-3FFG901I XC7K420T-2FFG901C XC7K480T-2FFG901C Kintex-7 FPGA field-programmable gate array programmable logic device logic cell configurable logic block block RAM 900-BBGA FCBGA FF901 package ball grid array surface-mount package 300 user I/O UG475 AMD package pinout files industrial temperature grade L2 speed grade
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle