XC7K355T-L2FFG901I - 356K Logic Kintex-7 FPGA | AMD
MPN: XC7K355T-L2FFG901I ✓ Hoạt độngXC7K355T-L2FFG901I Tóm tắt
An FPGA is a semiconductor whose digital function is defined after manufacture by loading a configuration bitstream. Unlike a fixed-function ASIC, an FPGA permits revisions, parallel interface adaptation, and hardware customization without fabricating a new chip. The XC7K355T family is positioned for demanding communications, industrial, instrumentation, high-performance signal-processing, and embedded-control systems where logic density and I/O bandwidth are more important than very low unit cost.
The XC7K355T device provides 356,160 configurable logic cells, 27,825 logic blocks, and 26,357,760 RAM bits. Its 300 user I/O support board-level connections to processors, memory devices, converters, network transceivers, and external test equipment. The -L2 designation identifies a lower-power-oriented speed grade within the Kintex-7 family, while the industrial temperature option extends the operating junction-temperature range from -40°C to 100°C.
The device supports a broad, parallel programmable architecture that can implement multiple data paths simultaneously. Designers can distribute arithmetic and control logic across the fabric, use dedicated RAM for buffering, and configure I/O standards through dedicated resources. This architecture is useful when a design requires concurrent channels, flexible timing, or interfaces that are not economically supported by a conventional microcontroller.
Typical applications include high-speed data acquisition, communications infrastructure, industrial control, test and measurement, signal processing, and embedded video or imaging systems. The large logic and RAM resources can support parallel data paths, protocol adaptation, digital filtering, and control functions without combining several lower-complexity programmable devices.
A 900-BBGA package requires careful PCB design, including controlled impedance routing, dense via structures, adequate power-plane connectivity, and thermal management. Confirm the exact pin assignments and bank voltage requirements against the AMD package pinout files and UG475 before schematic capture or PCB layout.
This page combines the device configuration, package details, replacement analysis, and practical design guidance needed to evaluate the XC7K355T-L2FFG901I for an existing Kintex-7 platform.
Bộ thay thế dễ dàng lắp đặt cho XC7K355T-L2FFG901I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K355T-L2FFG901I (cùng hình factor và footprint) — khác nhau ở Block RAM, Device Type, Logic Cells, Package, Mounting Type.
XC7K355T-1FFG901I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
XC7K355T-2FFG901I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K355T-3FFG901I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7K420T-2FFG901C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K480T-2FFG901C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K355T-L2FFG901I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 356,160 cells |
| Logic Blocks | 27,825 LABs/CLBs |
| Block RAM | 26,357,760 bits |
| User I/O Count | 300 I/Os |
| Core Supply Voltage Range | 0.97 V to 1.03 V |
| Nhiệt độ mối nối hoạt động | -40°C to 100°C |
| Hộp | 900-BBGA FCBGA |
| Kiểu lắp đặt | Surface Mount |
| Device Family | Kintex-7 XC7K355T |
| Speed Grade | L2 |
| Temperature Grade | Industrial |
Hướng dẫn cấu hình chân XC7K355T-L2FFG901I 900-bbga fcbga
Cấu hình chân cho XC7K355T-L2FFG901I (900-bbga fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K355T-L2FFG901I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K355T-L2FFG901I phù hợp cho 6 Áp dụngs: High-Speed Data Acquisition, Communications Signal Processing, Industrial Control Platform, Test and Measurement Instrumentation, Parallel Digital Filtering, Aerospace and Defense Control Systems.
High-Speed Data Acquisition
The XC7K355T-L2FFG901I fits parallel data-acquisition systems that need flexible buffering, timing, and digital correction. Its 356,160 logic cells can organize multiple converter channels, while 26,357,760 RAM bits support parallel sample storage, packetization, and preprocessing. The 300 user I/O provide connections for converters, clock sources, trigger logic, and data-processing elements. A practical design routes each converter into a timed capture pipeline, stores blocks in RAM, and transfers processed results through a high-speed serial interface. The L2 grade is attractive when reducing dynamic and static power is important, although the final power budget depends on selected I/O standards, switching activity, configuration, clocking, and the -2L operating-voltage limits documented by AMD.
Được đề xuất
Communications Signal Processing
The XC7K355T-L2FFG901I supports communications signal-processing designs that require parallel channels and flexible interface adaptation. The 356,160 logic cells can implement filters, correlators, protocol state machines, and packet transformations concurrently, while the 26,357,760 RAM bits accommodate channel buffers and temporary working data. With 300 user I/O, the device can connect directly to transceivers, parallel network processors, and timing-distribution circuits. Engineers commonly use clock-management resources to establish deterministic sampling paths and separate high-speed data from control logic. Compared with a smaller FPGA, the XC7K355T provides more parallelism without moving to the largest Kintex-7 members. The L2 speed and power grade must be checked against the required interface timing, and board-level channel loss, skew, and return loss should be simulated with the actual transceiver and package model.
Được đề xuất
Industrial Control Platform
The XC7K355T-L2FFG901I is suitable for an industrial control platform that combines deterministic motion control, machine I/O, diagnostics, and communications. Its 356,160 logic cells allow supervisory control, protocol conversion, and timing functions to run alongside dedicated data pipelines, while 26,357,760 RAM bits can support history buffers and event logging. The 300 I/O accommodate encoders, sensor interfaces, actuators, industrial networks, and status signals. The industrial suffix provides a specified -40°C to 100°C junction-temperature range for the device family, making it suitable for controlled industrial equipment when the system thermal design remains within limits. Use the AMD pinout files to assign I/O standards and bank power correctly, isolate noisy industrial interfaces, and include watchdogs or redundant safety controls above the FPGA when required by the machine-risk assessment.
Được đề xuất
Test and Measurement Instrumentation
The XC7K355T-L2FFG901I can implement programmable test and measurement logic when product functionality must change without a new ASIC. The large FPGA fabric supports parallel acquisition engines, pattern generation, real-time analysis, and protocol-specific test sequences, while the 26,357,760 RAM bits provide storage for captured waveforms and intermediate results. Its 300 user I/O allow connection to analog converters, trigger generators, reference clocks, and digital test ports. A typical instrument uses a timed acquisition pipeline, FPGA-based filtering, and a data-transfer engine feeding a host processor. The L2 profile is useful when the instrument has a restricted thermal envelope, but switching activity and I/O toggling can dominate actual power. Validate acquisition timing with the selected converters, include clock uncertainty in the timing budget, and use the package pinout and UG475 to implement the 900-BBGA escape routing correctly.
Được đề xuất
Parallel Digital Filtering
The XC7K355T-L2FFG901I is well suited to parallel digital filtering because 356,160 logic cells can implement multiple independent lanes, and 26,357,760 RAM bits support sample delay lines, coefficient storage, and overlap buffers. A design can distribute decimation, interpolation, correlation, or spectrum-processing stages across the fabric and use dedicated RAM for predictable throughput. The 300 user I/O provide parallel input and output channels for converters or DSP devices. Compared with a sequential processor implementation, the FPGA architecture can sustain multiple lanes concurrently while keeping the processing latency under direct control. Resource sharing can reduce logic use but may lower throughput or complicate timing closure. Validate arithmetic precision against the intended filter response, constrain all paths at the selected operating speed, and simulate the complete data path rather than evaluating only the filter coefficients.
Được đề xuất
Aerospace and Defense Control Systems
The XC7K355T-L2FFG901I can support configurable control, monitoring, and data-processing functions in aerospace, defense, and rugged embedded systems. Its programmable fabric permits implementation of multiple control channels, sensor fusion stages, protocol bridges, and health-monitoring functions, while 26,357,760 RAM bits support local buffering. The industrial temperature suffix specifies a -40°C to 100°C junction-temperature range, but the device is not automatically qualified for every aerospace program. Qualification, reliability, radiation, security, and procurement requirements must be evaluated independently. Engineers should establish a requirements traceability matrix, verify the exact ordering code, assess single-event effects where applicable, and complete worst-case power and timing analysis. The 900-BBGA package also demands controlled assembly processes, inspection, and thermal analysis appropriate to the mission environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K355T-L2FFG901I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K355T-1FFG901I | XC7K355T-2FFG901I | XC7K355T-3FFG901I | XC7K420T-2FFG901C | XC7K480T-2FFG901C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA FF901 | 900-BBGA FF901 - same | 900-BBGA FF901 - same | 900-BBGA FF901 - same | 900-BBGA FF901 - same | 900-BBGA FF901 - same |
| Device Family | Kintex-7 XC7K355T | Kintex-7 XC7K355T | Kintex-7 XC7K355T | Kintex-7 XC7K355T | Kintex-7 XC7K420T | Kintex-7 XC7K480T |
| Speed Grade | L2 | -1 | -2 | -3 | -2 | -2 |
| Temperature Suffix | I - Industrial | I - Industrial | I - Industrial | I - Industrial | C - Commercial | C - Commercial |
Bảo phân biệt quan trọng
- Lower-power-oriented L2 speed grade (vsXC7K355T-2FFG901I)
- Industrial temperature ordering option (vsXC7K420T-2FFG901C)
- Same FF901 package without larger-device overhead (vsXC7K480T-2FFG901C)
- Kintex-7 resource allocation balanced for parallel processing (vsXC7K355T-1FFG901I)
Ghi chú thiết kế
Treat the 900-BBGA package as a major thermal-design element. Place the device over a continuous power-and-ground-plane structure, provide through-hole thermal vias beneath the package where the footprint and assembly process permit, and avoid placing heat sources directly beneath the BGA. Calculate worst-case junction temperature from actual FPGA activity, configured I/O loading, board copper, enclosure temperature, and the board-level thermal model. Validate the result with the AMD power calculator and a physical thermal measurement before production release.
Use the AMD FF901 package pinout and recommended land pattern rather than a generic BGA footprint. Verify ball assignment, power grouping, configuration pins, clock-capable pins, and I/O bank boundaries before schematic sign-off. The 900-ball package requires a multilayer PCB with short, low-inductance power connections and adequate via arrays around major power and ground balls. Complete extraction, power-integrity, and signal-integrity simulations with the final layer stack-up, components, and memory interfaces.
Constrain every external interface at its actual interface rate rather than relying on a single device timing constraint. Apply board-specific timing exceptions only when justified by measured or simulated routing behavior. Check package and board channel loss, reflection, crosstalk, clock skew, and I/O supply-noise sensitivity. For memory or transceiver links, use the manufacturer’s IBIS or SPICE models when available and validate the board with measured eye patterns or compliance fixtures before releasing the FPGA bitstream.
Do not assume that the L2, -1, -2, or -3 ordering codes are interchangeable solely because the package matches. Review timing grade, voltage limits, static and dynamic power, junction-temperature limits, configuration behavior, and qualification requirements for every substitution. Likewise, do not assume that a larger XC7K420T or XC7K480T is a drop-in functional upgrade. Re-run synthesis, place-and-route, timing analysis, power estimation, bitstream generation, and hardware validation for the exact ordering code placed on the board.
Thông tin tuân thủ
The manufacturer's ordering code and program-specific qualification requirements must be reviewed before making a compliance determination.