ISO1432DWR vs ISO1430DWR موازنہ
تفصیلی ساتھ ساتھ موازنہ از ISO1432DWR بذریعہ Texas Instruments اور ISO1430DWR بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ISO1432DWR | ISO1430DWR |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Drivers, Receivers, Transceivers | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| آپریٹنگ درجہ حرارت | -40 °C to +125 °C | — |
| پیکیج | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | [DATA_NEEDED: common-mode transient immunity] |
| UL Recognition | UL 1577 recognized | — |
| RoHS اسٹیٹس | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| MSL لیول | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated half-duplex RS-485 and RS-422 transceiver |
| Maximum Data Rate | — | 12 Mbps |
| Isolation Rating | — | 5 kVrms |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | Protected against ESD and EFT bus events |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| آپریٹنگ درجہ حرارت رینج | — | -40°C to +125°C |
| Logic Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |
| EFT Protection Rating | — | [DATA_NEEDED: EFT protection rating] |
| Isolation Capacitance | — | [DATA_NEEDED: isolation capacitance] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| REACH Status | — | [DATA_NEEDED: REACH status] |