LM2901NG vs LM2901SNG موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM2901NG بذریعہ onsemi اور LM2901SNG بذریعہ onsemi. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | LM2901NG | LM2901SNG |
|---|---|---|
| برانڈ | onsemi | onsemi |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Comparator Type | Quad differential comparator | General-purpose quad comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | ±18 V |
| Supply Configuration | Single supply | Single or dual supply |
| آؤٹ پٹ کی قسم | Open collector | Open-collector |
| Logic Compatibility | TTL and CMOS | — |
| Output Saturation Voltage | 130 mV at 4 mA | — |
| Common-Mode Input Range | Includes ground | — |
| آپریٹنگ درجہ حرارت رینج | -40°C to 105°C | [DATA_NEEDED: operating temperature range] |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| ماؤنٹنگ ٹائپ | Through-hole | Through-hole |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| سپلائی کرنٹ | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Input Voltage Range | — | Includes ground V |
| پیکیج | — | 14-pin PDIP |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |