LM2901NG vs LM2901SNG 비교
다음의 상세 나란히 비교: LM2901NG 제조: onsemi 및 LM2901SNG 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM2901NG | LM2901SNG |
|---|---|---|
| 브랜드 | onsemi | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Quad differential comparator | General-purpose quad comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | ±18 V |
| Supply Configuration | Single supply | Single or dual supply |
| 출력 유형 | Open collector | Open-collector |
| Logic Compatibility | TTL and CMOS | — |
| Output Saturation Voltage | 130 mV at 4 mA | — |
| Common-Mode Input Range | Includes ground | — |
| 동작 온도 범위 | -40°C to 105°C | [DATA_NEEDED: operating temperature range] |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| 실장 유형 | Through-hole | Through-hole |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Input Voltage Range | — | Includes ground V |
| 패키지 | — | 14-pin PDIP |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |