LM2901NG vs LM2901SNG مقایسه
مقایسه دقیق کنار به کنار LM2901NG توسط onsemi و LM2901SNG توسط onsemi. مشخصات کلیدی، پارامترهای الکتریکی، بستهبندی، وضعیت چرخه عمر، قیمتگذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | LM2901NG | LM2901SNG |
|---|---|---|
| برند | onsemi | onsemi |
| دستهبندی | Amplifier ICs | Amplifier ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Comparator Type | Quad differential comparator | General-purpose quad comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | ±18 V |
| Supply Configuration | Single supply | Single or dual supply |
| نوع خروجی | Open collector | Open-collector |
| Logic Compatibility | TTL and CMOS | — |
| Output Saturation Voltage | 130 mV at 4 mA | — |
| Common-Mode Input Range | Includes ground | — |
| محدوده دمای کاری | -40°C to 105°C | [DATA_NEEDED: operating temperature range] |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| نوع نصب | Through-hole | Through-hole |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| جریان تغذیه | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Input Voltage Range | — | Includes ground V |
| بستهبندی | — | 14-pin PDIP |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |