Analog Devices

AD7492BR-5 12-Bit 1.25 MSPS SAR ADC | Analog Devices

MPN: AD7492BR-5 ✓ فعال
2.7 V to 5.25 V Vdss 24-pin SOIC Package
MOQ: 1 |

AD7492BR-5 جائزہ

The Analog Devices AD7492BR-5 is a 12-bit, single-channel successive-approximation-register (SAR) analog-to-digital converter in a 24-pin SOIC package. It is identified as a 5 V device with single-ended input, parallel output, and throughput rates up to 1.25 MSPS. The AD7492 family operates from a single 2.7 V to 5.25 V power supply, covering common industrial, instrumentation, communications, and embedded measurement supply rails.

An ADC is a data-acquisition IC that converts an analog voltage into a digital code. SAR ADCs perform conversion through repeated comparison of the input voltage with a reference-derived voltage. This architecture is widely used for moderate-speed measurement because it provides predictable sampling behavior, compact implementation, and direct digital output for downstream processing. The AD7492 belongs to the ADC > data converter > integrated circuit hierarchy and is designed for applications that require more resolution than a low-resolution sensor interface but do not require the throughput of a high-speed pipeline converter.

The AD7492BR-5 is specified as a 12-bit converter with a 1.25 MSPS maximum throughput, while one product listing describes the AD7492BR as a 1 MHz device. The distinction may reflect package or listing variation, so the manufacturer product page and datasheet should control the final design limit. The device uses a single-ended input, making it suitable for unipolar analog measurements that can be referenced to ground. Its parallel output interface is appropriate for systems in which digital data is captured directly by a controller or FPGA.

Typical uses include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, communications infrastructure, and embedded control systems. The 24-pin SOIC package provides a conventional surface-mount footprint and exposed lead access for automated assembly. Designers should confirm the exact timing, input range, reference requirements, acquisition circuitry, and logic levels against the manufacturer datasheet before releasing a production design.

The principal design consideration is input conditioning. The ADC should be driven through a suitable front end that limits out-of-band noise, protects the input from transients, and provides the required settling behavior for the selected sample rate. Keep the analog input path short, maintain a stable return path, and place bypass and reference-decoupling capacitors close to their associated pins. The manufacturer’s recommended application circuit should be followed when defining impedance, filtering, and layout.

This page combines the AD7492 family specifications, package information, pricing references, candidate drop-in alternatives, and application guidance into one engineering-oriented resource. It also highlights the distinction between general ADC functionality and the specific electrical and timing requirements that must be confirmed before substituting a converter on an existing PCB.

کے لیے ڈراپ اِن متبادل AD7492BR-5 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD7492BR-5 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Analog Devices
Package: 24-lead SOIC, MS-013AD
موازنہ کریں AD7492BR-5 →

AD7492BRZ

✅ ڈراپ-اِن
Analog Devices
📦 24-SOIC
12 bit · Successive approximation (SAR) · 1 analog input · 1 MSPS · 1.25 MSPS · 400 kSPS · 2.7 V to 5.25 V · 0 V to 2.5 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

AD7492BRU

✅ ڈراپ-اِن
📦 24-SOIC
Same AD7492 family and 24-SOIC package; ordering-suffix availability and grade details differ and require confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD7492BRUZ

✅ ڈراپ-اِن
📦 24-SOIC
Same AD7492 family and 24-SOIC package; suffix-specific orderable configuration differs from AD7492BR-5

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD7492BR

✅ ڈراپ-اِن
📦 24-SOIC
Base AD7492 ordering option in 24-SOIC; one listing states 1 MHz while the family page states up to 1.25 MSPS

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD7492BR-REEL7

✅ ڈراپ-اِن
📦 24-SOIC
Same AD7492 family and 24-SOIC electrical configuration; reel packaging code differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD7492BR-5-REEL7

✅ ڈراپ-اِن
📦 24-SOIC
Same AD7492BR-5 family and 24-SOIC electrical configuration; reel packaging code differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD7492BR-5 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Converter Type Successive Approximation Register (SAR) ADC
ریزولوشن 12 bit
Number of Channels 1 channel
Input Type Single-ended
Maximum Throughput 1.25 MSPS
AD7492BR Listed Sampling Rate 1 MHz
Supply Voltage Range 2.7 V to 5.25 V
Analog Supply Voltage 2.7 V to 5.25 V
Digital Supply Voltage 2.7 V to 5.25 V
Nominal Supply 5 V
Output Interface Parallel
پیکیج 24-pin SOIC
ماؤنٹنگ ٹائپ Surface Mount

AD7492BR-5 24-pin soic پن کنفیگریشن گائیڈ

AD7492BR-5 (24-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD7492BR-5 کے لیے 24-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD7492BR-5.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD7492BR-5 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Monitoring, Sensor Signal Acquisition, Laboratory Measurement Equipment, Communications Infrastructure, Embedded Control Systems, Data Acquisition Modules.

🏭

Industrial Process Monitoring

The AD7492BR-5 fits process-monitoring systems that sample a single analog measurement with a 12-bit SAR ADC. Its 2.7 V to 5.25 V operating range supports both 3.3 V and 5 V instrumentation, while the family’s throughput up to 1.25 MSPS provides headroom for periodic measurements and diagnostic sampling. Use a protected, filtered front end ahead of the single-ended input, and keep the analog trace short. The parallel output can feed a controller or FPGA directly, although logic compatibility and acquisition timing must be verified against the exact datasheet.

🧩

Sensor Signal Acquisition

The AD7492BR-5 is appropriate for acquiring a unipolar sensor output through its single-ended input. The 12-bit resolution provides 4096 digital codes before considering the converter’s complete transfer behavior, making it useful for temperature, pressure, position, and slow-varying chemical sensors. The SAR architecture supports periodic sampling without the continuous internal pipeline operation associated with higher-speed converters. Place an anti-alias filter and input-protection network at the sensor interface, and verify the sensor’s output range against the confirmed ADC input limits.

🔧

Laboratory Measurement Equipment

A 12-bit SAR converter with up to 1.25 MSPS family throughput can support laboratory instruments that digitize slow and medium-speed analog signals. The AD7492BR-5’s single-ended input simplifies front-end design when the measured quantity is ground-referenced, while the parallel interface reduces protocol overhead in FPGA- or logic-based capture systems. For accurate measurements, use a low-noise reference, decouple supply pins locally, and isolate sensitive input routing from digital outputs. The final input range, reference requirement, and acquisition timing should come from the manufacturer datasheet.

🌐

Communications Infrastructure

The AD7492BR-5 can be used for monitoring or control signals in communications equipment where a moderate-resolution, single-channel converter is sufficient. The 2.7 V to 5.25 V supply range accommodates common embedded and line-card voltage levels, and the parallel outputs can be captured by digital logic. Designers should treat the ADC front end as a precision analog subsystem: use controlled-impedance routing, solid grounding, local bypass capacitors, and protection suitable for the interface environment. Verify the exact sample rate and timing margin before relying on the family-level 1.25 MSPS figure.

⚡

Embedded Control Systems

The AD7492BR-5 is suitable for embedded systems that need more measurement resolution than a simple comparator but do not need a high-speed converter. A microcontroller can control acquisition and conversion while the ADC’s parallel bus delivers the 12-bit result. In a compact mixed-signal design, route the data bus away from the analog input, provide a continuous ground reference, and place bypass capacitors close to the converter. The selected controller must support the converter’s logic levels, and the complete timing sequence should be checked for contention between conversion start, chip select, and data capture.

🖥️

Data Acquisition Modules

The AD7492BR-5 is a practical converter choice for compact single-channel data-acquisition modules that prioritize resolution, interface simplicity, and low supply complexity. Its parallel output allows the module to feed captured data directly into an FPGA or digital controller, while the 12-bit SAR format is suitable for many pressure, level, voltage, and instrumentation channels. The 24-pin SOIC package also supports conventional automated PCB assembly. Layout should separate analog and digital return currents, minimize input-node capacitance, and use the manufacturer reference circuit to establish practical acquisition bandwidth.

What is the AD7492BR-5?
The AD7492BR-5 is a 12-bit, single-channel, single-ended SAR analog-to-digital converter from Analog Devices in a 24-pin SOIC package. According to the Analog Devices AD7492 product page, the AD7492 family provides throughput rates up to 1.25 MSPS and operates from a single 2.7 V to 5.25 V supply. Its parallel output is intended for direct acquisition by digital control logic.
What is the conversion speed of AD7492BR-5?
The AD7492 family supports throughput rates up to 1.25 MSPS, while one AD7492BR distributor listing identifies a 1 MHz sampling rate. The manufacturer documentation should be treated as authoritative when setting the production timing limit. The distinction may reflect a product-family listing or option difference, so acquisition timing should not be finalized without checking the exact ordering code.
What is the supply voltage range of AD7492BR-5?
The AD7492BR-5 operates from a single 2.7 V to 5.25 V power supply. This range supports common 3.3 V and 5 V systems while allowing one converter family to cover multiple supply architectures. The Analog Devices product page identifies both analog and digital operation within the family-level supply range.
Does AD7492BR-5 use a serial or parallel interface?
The AD7492BR-5 uses a parallel output interface. Parallel outputs provide direct binary data to a microcontroller, FPGA, logic device, or data-capture system without requiring a serial data clock. The selected receiving device must be checked for voltage compatibility, acquisition timing, and required output timing margin.
Is AD7492BR-5 suitable for single-ended sensor measurements?
Yes. The AD7492BR-5 is identified as a single-ended-input converter, making it appropriate for unipolar sensor signals referenced to ground. The sensor output must remain within the confirmed input range and should be conditioned for the required bandwidth, settling time, noise level, and protection margin before entering the ADC input.
Where can I download the AD7492BR-5 datasheet PDF?
The official AD7492 product page at Analog Devices is the appropriate starting point for the AD7492BR-5 datasheet and supporting documentation. Use the product page’s datasheet link to select the document matching the AD7492BR-5 ordering code. The page also distinguishes the AD7492, AD7492-4, and AD7492-5 performance options.
Where can I find the AD7492BR-5 pinout?
The AD7492BR-5 pinout is found in the manufacturer datasheet and the package drawing associated with the AD7492 family. The device uses a 24-pin SOIC package, but pin functions and no-connect details should be assigned directly from the exact datasheet. Use the pin-description table when routing digital outputs, analog inputs, supplies, and reference connections.
What is the best drop-in replacement for AD7492BR-5?
The closest documented candidates are AD7492 family ordering options such as AD7492BRZ and AD7492BRU, but a drop-in claim requires verification of package, pinout, interface, timing, and acquisition specifications. The available comparison pages identify similar AD7492 listings while warning that equivalent stock entries are not automatically drop-in replacements. Confirm the exact suffix behavior before substituting any part.
Can AD7492BRZ replace AD7492BR-5?
AD7492BRZ is a possible same-family candidate for review, not an automatic replacement. Its suitability depends on whether the lead finish, grade, ordering suffix, and documented electrical behavior preserve the AD7492BR-5 interface and timing. Compare the AD7492BRZ and AD7492BR-5 datasheets, pin assignments, and production requirements before approving the substitution.
AD7492BR-5 vs AD7495BRZ: which converter should I choose?
The AD7492BR-5 is the 12-bit AD7492-family converter, while the AD7495BRZ belongs to the AD7495 family. The comparison data identifies package, compliance, and series attributes but does not establish complete pin-to-pin equivalence. Choose the part only after checking resolution, throughput, interface timing, reference requirements, and the physical pin map.
When should I choose AD7492BR-5 instead of another 12-bit SAR ADC?
Choose the AD7492BR-5 when the design specifically requires the AD7492 family behavior, a 12-bit SAR conversion architecture, single-ended input, and a 24-pin SOIC footprint. If another converter offers the same resolution and package but a different interface, acquisition timing, or pin arrangement, it may require software and PCB changes rather than serving as a direct replacement.
Is AD7492BR-5 suitable for industrial process measurement?
The AD7492BR-5 can fit industrial process-measurement loops that operate within its 2.7 V to 5.25 V supply range and can tolerate the converter’s sampling characteristics. A practical implementation also needs input protection, filtering, isolation or surge control as appropriate, and verified reference behavior. Confirm environmental and lifecycle requirements for the deployed equipment before production release.
How should I decouple the AD7492BR-5 power supply?
Place the supply bypass capacitors directly beside the converter’s analog and digital supply pins, with short ground returns and a solid ground plane. Follow the manufacturer application circuit for capacitor values and placement. Avoid long supply traces or shared return paths that can allow supply noise or switching current to appear at the analog input.
What key specifications should engineers know about AD7492BR-5?
The principal specifications are 12-bit resolution, single-channel SAR conversion, single-ended input, parallel output, a 24-pin SOIC package, and operation from 2.7 V to 5.25 V. The AD7492 family is identified as supporting throughput up to 1.25 MSPS. These characteristics position it for moderate-speed data acquisition and embedded measurement systems.
Where can I buy AD7492BR-5 and check current lead time?
Use the Request a Quote form on this page to request current AD7492BR-5 availability, pricing, and lead time for the required quantity. The listed reference price reflects a web listing dated 2026-04 and does not represent a guaranteed current quotation. Share the target quantity, packaging preference, and delivery location when requesting a quote.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD7492BR-5 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the AD7492BR-5 when the design requires a 12-bit, single-channel SAR ADC with single-ended input, parallel output, and a 24-pin SOIC footprint. It is particularly suitable for moderate-speed instrumentation, sensor acquisition, process monitoring, and embedded measurement systems that operate from a 2.7 V to 5.25 V supply. Review AD7492BRZ, AD7492BRU, AD7492BRUZ, AD7492BR, AD7492BR-REEL7, and AD7492BR-5-REEL7 only as same-family candidates whose suffix, grade, packaging, lifecycle, and timing must be checked against the exact orderable specification. For a different ADC family, such as AD7495BRZ, treat the choice as a redesign comparison rather than a drop-in decision because resolution, interface, timing, reference requirements, and pin mapping may differ. Before any substitution, confirm the complete pinout, acquisition timing, input range, reference design, supply decoupling, and production lifecycle requirements.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD7492BRZ AD7492BRU AD7492BRUZ AD7492BR AD7492BR-REEL7 AD7492BR-5-REEL7
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-SOIC 24-SOIC 24-SOIC 24-SOIC 24-SOIC 24-SOIC 24-SOIC
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Converter Architecture SAR SAR SAR SAR SAR SAR SAR
Channel Count 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Input Type Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended
Output Interface Parallel Parallel Parallel Parallel Parallel Parallel Parallel
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Family Throughput Up to 1.25 MSPS Up to 1.25 MSPS Up to 1.25 MSPS Up to 1.25 MSPS 1 MHz listed; family page states up to 1.25 MSPS Up to 1.25 MSPS Up to 1.25 MSPS

اہم امتیازی خصوصیات

  • Defined single-channel 12-bit conversion (بمقابلہAD7495BRZ)
  • Parallel data acquisition interface (بمقابلہAD7495BRZ)
  • Common single-supply operating range (بمقابلہAD7492BR)

ڈیزائن نوٹس

Route the analog input as a short, controlled-impedance trace directly toward the AD7492BR-5 input pin. Keep digital output routing on the opposite side of the device and return digital switching current through a dedicated ground path. Place input filtering and protection components close to the ADC rather than near the signal source, where long traces could add capacitance and pickup.

Use the manufacturer reference circuit for analog and digital bypass-capacitor placement. Keep each capacitor adjacent to its intended supply or reference pin, use short ground connections, and provide a continuous ground plane. Decoupling cannot correct an unsuitable reference network, so verify reference stability separately if the measurement accuracy depends on a low-noise conversion result.

Do not treat the 1.25 MSPS family statement and the 1 MHz AD7492BR listing as interchangeable timing limits without checking the exact suffix. Also avoid assuming that similar AD7492 order codes are automatically production equivalents. Compare acquisition time, output timing, grade, temperature range, lead finish, and lifecycle status in the exact manufacturer documentation before approving a substitution.

The source impedance presented to the single-ended input affects settling accuracy and the usable acquisition bandwidth. Select the input network so the converter can charge its sampling capacitance within the available acquisition interval. Include the output impedance of the sensor or amplifier, capacitor tolerances, and the required input bandwidth when designing the filter, rather than sizing the network from nominal capacitance alone.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The comparison material references RoHS and REACH status, but a definitive compliance determination for the exact AD7492BR-5 ordering code was not identified. AEC-Q100 qualification is not established for this part.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD7492BR-5 datasheet AD7492BR-5 pinout AD7492BR-5 datasheet pdf AD7492BR-5 equivalent AD7492BR-5 replacement AD7492BR-5 price AD7492BR-5 stock AD7492BR-5 24-SOIC pinout AD7492BR-5 vs AD7495BRZ Analog Devices AD7492BR-5 AD7492BR-5 12-bit SAR ADC AD7492BR-5 application circuit

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD7492BR-5 AD7492 AD7492BRZ AD7492BRU AD7492BRUZ AD7492BR AD7492BR-REEL7 AD7492BR-5-REEL7 AD7495BRZ ADC analog-to-digital converter successive approximation register SAR single-ended input parallel output 12-bit resolution 1.25 MSPS 2.7 V to 5.25 V supply 24-pin SOIC SOIC package family surface-mount package data acquisition sensor signal acquisition industrial process monitoring RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں