AD7492BR-5 12-Bit 1.25 MSPS SAR ADC | Analog Devices
部品番号: AD7492BR-5 ✓ 生産中AD7492BR-5 概要
An ADC is a data-acquisition IC that converts an analog voltage into a digital code. SAR ADCs perform conversion through repeated comparison of the input voltage with a reference-derived voltage. This architecture is widely used for moderate-speed measurement because it provides predictable sampling behavior, compact implementation, and direct digital output for downstream processing. The AD7492 belongs to the ADC > data converter > integrated circuit hierarchy and is designed for applications that require more resolution than a low-resolution sensor interface but do not require the throughput of a high-speed pipeline converter.
The AD7492BR-5 is specified as a 12-bit converter with a 1.25 MSPS maximum throughput, while one product listing describes the AD7492BR as a 1 MHz device. The distinction may reflect package or listing variation, so the manufacturer product page and datasheet should control the final design limit. The device uses a single-ended input, making it suitable for unipolar analog measurements that can be referenced to ground. Its parallel output interface is appropriate for systems in which digital data is captured directly by a controller or FPGA.
Typical uses include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, communications infrastructure, and embedded control systems. The 24-pin SOIC package provides a conventional surface-mount footprint and exposed lead access for automated assembly. Designers should confirm the exact timing, input range, reference requirements, acquisition circuitry, and logic levels against the manufacturer datasheet before releasing a production design.
The principal design consideration is input conditioning. The ADC should be driven through a suitable front end that limits out-of-band noise, protects the input from transients, and provides the required settling behavior for the selected sample rate. Keep the analog input path short, maintain a stable return path, and place bypass and reference-decoupling capacitors close to their associated pins. The manufacturer’s recommended application circuit should be followed when defining impedance, filtering, and layout.
This page combines the AD7492 family specifications, package information, pricing references, candidate drop-in alternatives, and application guidance into one engineering-oriented resource. It also highlights the distinction between general ADC functionality and the specific electrical and timing requirements that must be confirmed before substituting a converter on an existing PCB.
ドロップイン代替品: AD7492BR-5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD7492BR-5 (同一形状・フットプリント) — 相違点: Package.
AD7492BRZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD7492BRU
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD7492BRUZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD7492BR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD7492BR-REEL7
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD7492BR-5-REEL7
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD7492BR-5 最大定格&電気的特性
| Converter Type | Successive Approximation Register (SAR) ADC |
| 分解能 | 12 bit |
| Number of Channels | 1 channel |
| Input Type | Single-ended |
| Maximum Throughput | 1.25 MSPS |
| AD7492BR Listed Sampling Rate | 1 MHz |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Analog Supply Voltage | 2.7 V to 5.25 V |
| Digital Supply Voltage | 2.7 V to 5.25 V |
| Nominal Supply | 5 V |
| Output Interface | Parallel |
| パッケージ | 24-pin SOIC |
| 実装タイプ | Surface Mount |
AD7492BR-5 24-pin soic ピン配置ガイド
AD7492BR-5 (24-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD7492BR-5.
詳細は データシート をご参照ください。
主な用途
AD7492BR-5 の用途: 6 件s: Industrial Process Monitoring, Sensor Signal Acquisition, Laboratory Measurement Equipment, Communications Infrastructure, Embedded Control Systems, Data Acquisition Modules.
Industrial Process Monitoring
The AD7492BR-5 fits process-monitoring systems that sample a single analog measurement with a 12-bit SAR ADC. Its 2.7 V to 5.25 V operating range supports both 3.3 V and 5 V instrumentation, while the family’s throughput up to 1.25 MSPS provides headroom for periodic measurements and diagnostic sampling. Use a protected, filtered front end ahead of the single-ended input, and keep the analog trace short. The parallel output can feed a controller or FPGA directly, although logic compatibility and acquisition timing must be verified against the exact datasheet.
おすすめ
Sensor Signal Acquisition
The AD7492BR-5 is appropriate for acquiring a unipolar sensor output through its single-ended input. The 12-bit resolution provides 4096 digital codes before considering the converter’s complete transfer behavior, making it useful for temperature, pressure, position, and slow-varying chemical sensors. The SAR architecture supports periodic sampling without the continuous internal pipeline operation associated with higher-speed converters. Place an anti-alias filter and input-protection network at the sensor interface, and verify the sensor’s output range against the confirmed ADC input limits.
おすすめ
Laboratory Measurement Equipment
A 12-bit SAR converter with up to 1.25 MSPS family throughput can support laboratory instruments that digitize slow and medium-speed analog signals. The AD7492BR-5’s single-ended input simplifies front-end design when the measured quantity is ground-referenced, while the parallel interface reduces protocol overhead in FPGA- or logic-based capture systems. For accurate measurements, use a low-noise reference, decouple supply pins locally, and isolate sensitive input routing from digital outputs. The final input range, reference requirement, and acquisition timing should come from the manufacturer datasheet.
おすすめ
Communications Infrastructure
The AD7492BR-5 can be used for monitoring or control signals in communications equipment where a moderate-resolution, single-channel converter is sufficient. The 2.7 V to 5.25 V supply range accommodates common embedded and line-card voltage levels, and the parallel outputs can be captured by digital logic. Designers should treat the ADC front end as a precision analog subsystem: use controlled-impedance routing, solid grounding, local bypass capacitors, and protection suitable for the interface environment. Verify the exact sample rate and timing margin before relying on the family-level 1.25 MSPS figure.
おすすめ
Embedded Control Systems
The AD7492BR-5 is suitable for embedded systems that need more measurement resolution than a simple comparator but do not need a high-speed converter. A microcontroller can control acquisition and conversion while the ADC’s parallel bus delivers the 12-bit result. In a compact mixed-signal design, route the data bus away from the analog input, provide a continuous ground reference, and place bypass capacitors close to the converter. The selected controller must support the converter’s logic levels, and the complete timing sequence should be checked for contention between conversion start, chip select, and data capture.
おすすめ
Data Acquisition Modules
The AD7492BR-5 is a practical converter choice for compact single-channel data-acquisition modules that prioritize resolution, interface simplicity, and low supply complexity. Its parallel output allows the module to feed captured data directly into an FPGA or digital controller, while the 12-bit SAR format is suitable for many pressure, level, voltage, and instrumentation channels. The 24-pin SOIC package also supports conventional automated PCB assembly. Layout should separate analog and digital return currents, minimize input-node capacitance, and use the manufacturer reference circuit to establish practical acquisition bandwidth.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD7492BR-5 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD7492BRZ | AD7492BRU | AD7492BRUZ | AD7492BR | AD7492BR-REEL7 | AD7492BR-5-REEL7 |
|---|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Converter Architecture | SAR | SAR | SAR | SAR | SAR | SAR | SAR |
| Channel Count | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Input Type | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended |
| Output Interface | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Family Throughput | Up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS | 1 MHz listed; family page states up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS |
主な差別化要因
- Defined single-channel 12-bit conversion (vs AD7495BRZ)
- Parallel data acquisition interface (vs AD7495BRZ)
- Common single-supply operating range (vs AD7492BR)
設計ノート
Route the analog input as a short, controlled-impedance trace directly toward the AD7492BR-5 input pin. Keep digital output routing on the opposite side of the device and return digital switching current through a dedicated ground path. Place input filtering and protection components close to the ADC rather than near the signal source, where long traces could add capacitance and pickup.
Use the manufacturer reference circuit for analog and digital bypass-capacitor placement. Keep each capacitor adjacent to its intended supply or reference pin, use short ground connections, and provide a continuous ground plane. Decoupling cannot correct an unsuitable reference network, so verify reference stability separately if the measurement accuracy depends on a low-noise conversion result.
Do not treat the 1.25 MSPS family statement and the 1 MHz AD7492BR listing as interchangeable timing limits without checking the exact suffix. Also avoid assuming that similar AD7492 order codes are automatically production equivalents. Compare acquisition time, output timing, grade, temperature range, lead finish, and lifecycle status in the exact manufacturer documentation before approving a substitution.
The source impedance presented to the single-ended input affects settling accuracy and the usable acquisition bandwidth. Select the input network so the converter can charge its sampling capacitance within the available acquisition interval. Include the output impedance of the sensor or amplifier, capacitor tolerances, and the required input bandwidth when designing the filter, rather than sizing the network from nominal capacitance alone.
コンプライアンス情報
The comparison material references RoHS and REACH status, but a definitive compliance determination for the exact AD7492BR-5 ordering code was not identified. AEC-Q100 qualification is not established for this part.