AD7492BR-5 12-Bit 1.25 MSPS SAR ADC | Analog Devices
MPN: AD7492BR-5 ✓ 啟用中AD7492BR-5 概覽
An ADC is a data-acquisition IC that converts an analog voltage into a digital code. SAR ADCs perform conversion through repeated comparison of the input voltage with a reference-derived voltage. This architecture is widely used for moderate-speed measurement because it provides predictable sampling behavior, compact implementation, and direct digital output for downstream processing. The AD7492 belongs to the ADC > data converter > integrated circuit hierarchy and is designed for applications that require more resolution than a low-resolution sensor interface but do not require the throughput of a high-speed pipeline converter.
The AD7492BR-5 is specified as a 12-bit converter with a 1.25 MSPS maximum throughput, while one product listing describes the AD7492BR as a 1 MHz device. The distinction may reflect package or listing variation, so the manufacturer product page and datasheet should control the final design limit. The device uses a single-ended input, making it suitable for unipolar analog measurements that can be referenced to ground. Its parallel output interface is appropriate for systems in which digital data is captured directly by a controller or FPGA.
Typical uses include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, communications infrastructure, and embedded control systems. The 24-pin SOIC package provides a conventional surface-mount footprint and exposed lead access for automated assembly. Designers should confirm the exact timing, input range, reference requirements, acquisition circuitry, and logic levels against the manufacturer datasheet before releasing a production design.
The principal design consideration is input conditioning. The ADC should be driven through a suitable front end that limits out-of-band noise, protects the input from transients, and provides the required settling behavior for the selected sample rate. Keep the analog input path short, maintain a stable return path, and place bypass and reference-decoupling capacitors close to their associated pins. The manufacturer’s recommended application circuit should be followed when defining impedance, filtering, and layout.
This page combines the AD7492 family specifications, package information, pricing references, candidate drop-in alternatives, and application guidance into one engineering-oriented resource. It also highlights the distinction between general ADC functionality and the specific electrical and timing requirements that must be confirmed before substituting a converter on an existing PCB.
直接替換替代品,適用於 AD7492BR-5 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD7492BR-5 (相同外形與佔位) — 差異在於 Package.
AD7492BRZ
✅ 直接替換聯絡詢價
查看資料表 →AD7492BRU
✅ 直接替換📋 參考替代品(不在目錄中)
AD7492BRUZ
✅ 直接替換📋 參考替代品(不在目錄中)
AD7492BR
✅ 直接替換📋 參考替代品(不在目錄中)
AD7492BR-REEL7
✅ 直接替換📋 參考替代品(不在目錄中)
AD7492BR-5-REEL7
✅ 直接替換📋 參考替代品(不在目錄中)
AD7492BR-5 最大額定值與電氣特性
| Converter Type | Successive Approximation Register (SAR) ADC |
| 解析度 | 12 bit |
| Number of Channels | 1 channel |
| Input Type | Single-ended |
| Maximum Throughput | 1.25 MSPS |
| AD7492BR Listed Sampling Rate | 1 MHz |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Analog Supply Voltage | 2.7 V to 5.25 V |
| Digital Supply Voltage | 2.7 V to 5.25 V |
| Nominal Supply | 5 V |
| Output Interface | Parallel |
| 封裝 | 24-pin SOIC |
| 安裝類型 | Surface Mount |
AD7492BR-5 24-pin soic 腳位配置指南
AD7492BR-5(24-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD7492BR-5.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD7492BR-5 適用於 6 應用s: Industrial Process Monitoring, Sensor Signal Acquisition, Laboratory Measurement Equipment, Communications Infrastructure, Embedded Control Systems, Data Acquisition Modules.
Industrial Process Monitoring
The AD7492BR-5 fits process-monitoring systems that sample a single analog measurement with a 12-bit SAR ADC. Its 2.7 V to 5.25 V operating range supports both 3.3 V and 5 V instrumentation, while the family’s throughput up to 1.25 MSPS provides headroom for periodic measurements and diagnostic sampling. Use a protected, filtered front end ahead of the single-ended input, and keep the analog trace short. The parallel output can feed a controller or FPGA directly, although logic compatibility and acquisition timing must be verified against the exact datasheet.
推薦
Sensor Signal Acquisition
The AD7492BR-5 is appropriate for acquiring a unipolar sensor output through its single-ended input. The 12-bit resolution provides 4096 digital codes before considering the converter’s complete transfer behavior, making it useful for temperature, pressure, position, and slow-varying chemical sensors. The SAR architecture supports periodic sampling without the continuous internal pipeline operation associated with higher-speed converters. Place an anti-alias filter and input-protection network at the sensor interface, and verify the sensor’s output range against the confirmed ADC input limits.
推薦
Laboratory Measurement Equipment
A 12-bit SAR converter with up to 1.25 MSPS family throughput can support laboratory instruments that digitize slow and medium-speed analog signals. The AD7492BR-5’s single-ended input simplifies front-end design when the measured quantity is ground-referenced, while the parallel interface reduces protocol overhead in FPGA- or logic-based capture systems. For accurate measurements, use a low-noise reference, decouple supply pins locally, and isolate sensitive input routing from digital outputs. The final input range, reference requirement, and acquisition timing should come from the manufacturer datasheet.
推薦
Communications Infrastructure
The AD7492BR-5 can be used for monitoring or control signals in communications equipment where a moderate-resolution, single-channel converter is sufficient. The 2.7 V to 5.25 V supply range accommodates common embedded and line-card voltage levels, and the parallel outputs can be captured by digital logic. Designers should treat the ADC front end as a precision analog subsystem: use controlled-impedance routing, solid grounding, local bypass capacitors, and protection suitable for the interface environment. Verify the exact sample rate and timing margin before relying on the family-level 1.25 MSPS figure.
推薦
Embedded Control Systems
The AD7492BR-5 is suitable for embedded systems that need more measurement resolution than a simple comparator but do not need a high-speed converter. A microcontroller can control acquisition and conversion while the ADC’s parallel bus delivers the 12-bit result. In a compact mixed-signal design, route the data bus away from the analog input, provide a continuous ground reference, and place bypass capacitors close to the converter. The selected controller must support the converter’s logic levels, and the complete timing sequence should be checked for contention between conversion start, chip select, and data capture.
推薦
Data Acquisition Modules
The AD7492BR-5 is a practical converter choice for compact single-channel data-acquisition modules that prioritize resolution, interface simplicity, and low supply complexity. Its parallel output allows the module to feed captured data directly into an FPGA or digital controller, while the 12-bit SAR format is suitable for many pressure, level, voltage, and instrumentation channels. The 24-pin SOIC package also supports conventional automated PCB assembly. Layout should separate analog and digital return currents, minimize input-node capacitance, and use the manufacturer reference circuit to establish practical acquisition bandwidth.
推薦
推薦產品摘要
工程參考資料,適用於 AD7492BR-5 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD7492BRZ | AD7492BRU | AD7492BRUZ | AD7492BR | AD7492BR-REEL7 | AD7492BR-5-REEL7 |
|---|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Converter Architecture | SAR | SAR | SAR | SAR | SAR | SAR | SAR |
| Channel Count | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Input Type | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended |
| Output Interface | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Family Throughput | Up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS | 1 MHz listed; family page states up to 1.25 MSPS | Up to 1.25 MSPS | Up to 1.25 MSPS |
主要差異化特點
- Defined single-channel 12-bit conversion (對比AD7495BRZ)
- Parallel data acquisition interface (對比AD7495BRZ)
- Common single-supply operating range (對比AD7492BR)
設計說明
Route the analog input as a short, controlled-impedance trace directly toward the AD7492BR-5 input pin. Keep digital output routing on the opposite side of the device and return digital switching current through a dedicated ground path. Place input filtering and protection components close to the ADC rather than near the signal source, where long traces could add capacitance and pickup.
Use the manufacturer reference circuit for analog and digital bypass-capacitor placement. Keep each capacitor adjacent to its intended supply or reference pin, use short ground connections, and provide a continuous ground plane. Decoupling cannot correct an unsuitable reference network, so verify reference stability separately if the measurement accuracy depends on a low-noise conversion result.
Do not treat the 1.25 MSPS family statement and the 1 MHz AD7492BR listing as interchangeable timing limits without checking the exact suffix. Also avoid assuming that similar AD7492 order codes are automatically production equivalents. Compare acquisition time, output timing, grade, temperature range, lead finish, and lifecycle status in the exact manufacturer documentation before approving a substitution.
The source impedance presented to the single-ended input affects settling accuracy and the usable acquisition bandwidth. Select the input network so the converter can charge its sampling capacitance within the available acquisition interval. Include the output impedance of the sensor or amplifier, capacitor tolerances, and the required input bandwidth when designing the filter, rather than sizing the network from nominal capacitance alone.
合規資訊
The comparison material references RoHS and REACH status, but a definitive compliance determination for the exact AD7492BR-5 ordering code was not identified. AEC-Q100 qualification is not established for this part.