ADC10158CIN/NOPB - 10-Bit 8-Channel SAR ADC, 28-DIP | Texas Instruments
MPN: ADC10158CIN/NOPB ✓ فعالADC10158CIN/NOPB جائزہ
An SAR (Successive Approximation Register) ADC is a type of data converter that resolves each conversion in N clock periods by switching capacitor weights in a binary-search sequence. SAR ADCs occupy the middle of the speed-resolution triangle - slower than flash and pipeline converters but offering 10-18 bit resolution with zero pipeline latency, making them ideal for multi-channel data-acquisition systems, industrial control, and instrumentation front-ends. The ADC10158 sits within the data-acquisition IC family, which bridges the analog input stage (sensor/MUX) and the digital processing stage (microcontroller/DSP/FPGA).
Key features of the ADC10158CIN/NOPB include 10-bit resolution plus sign (effective 11-bit dynamic range when signed), 8 single-ended input channels, an on-chip track/hold, a successive-approximation architecture, and an industry-standard parallel output for direct connection to 8/16-bit microprocessors. The /NOPB suffix denotes a lead-free (No Pb) finish that is RoHS-compliant. Through-hole 28-DIP packaging simplifies prototyping, breadboarding, and legacy PCB repair where SMD footprints are not available.
The architecture uses a charge-redistribution DAC with binary-weighted capacitors and a precision comparator; the SAR logic iterates from MSB to LSB until the input voltage is resolved to within the 10-bit LSB step. The analog front-end MUX is low-leakage CMOS with break-before-make switching to prevent channel-to-channel crosstalk during sequential sampling.
Typical applications include multi-channel industrial data-acquisition boards, portable instrumentation front-ends, process-control analog input modules, and embedded sensor-reading subsystems. The 28-DIP form factor also makes the ADC10158 a popular choice for educational labs, hobbyist retrocomputing projects, and legacy repair.
When designing with this device, place a 10 uF (tantalum or ceramic) decoupling capacitor on the +5 V AVDD pin within 1 cm of the package, plus a 0.1 uF ceramic high-frequency bypass. The reference pin requires a low-impedance source - a 10 uF + 0.1 uF pair is typical. Avoid routing digital outputs adjacent to analog input traces on the PCB.
This page synthesizes distributor pricing, package-compatibility (drop-in) alternatives, application-focused design notes, and a parametric comparison table - engineering content not collected on any single distributor or manufacturer page.
کے لیے ڈراپ اِن متبادل ADC10158CIN/NOPB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADC10158CIN/NOPB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Input Type, Number of Input Channels, Package, Resolution.
ADC10154CIN/NOPB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC10158CIWM/NOPB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADC10158CIN
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC104S021CIN/NOPB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC10158CIN/NOPB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 10 bit + sign (11-bit effective dynamic range) |
| Architecture | SAR (Successive Approximation Register) |
| Number of Input Channels | 8 single-ended / 4 differential |
| Number of ADCs | 1 |
| Analog Supply Voltage | +5 V (single supply) |
| Digital Supply Voltage | +5 V (compatible with 5 V logic) |
| Input Type | Single-ended (pseudo-differential option) |
| Output Interface | Parallel (microprocessor-compatible) |
| Track-and-Hold | Yes, on-chip |
| Reference Type | External reference required |
| پیکیج | 28-pin PDIP (NFF0008A), through-hole |
| پن کی تعداد | 28 |
| آپریٹنگ درجہ حرارت رینج | -40 C to +85 C (industrial) |
| Temperature Grade | Industrial |
| Terminal Form | Through-Hole |
| Lead-Free Finish | Yes (/NOPB suffix = No Pb) |
| RoHS اسٹیٹس | Compliant |
ADC10158CIN/NOPB پن کنفیگریشن
| پن 1 | VIN0 — Analog input channel 0 |
| پن 2 | VIN1 — Analog input channel 1 |
| پن 3 | VIN2 — Analog input channel 2 |
| پن 4 | VIN3 — Analog input channel 3 |
| پن 5 | VIN4 — Analog input channel 4 |
| پن 6 | VIN5 — Analog input channel 5 |
| پن 7 | VIN6 — Analog input channel 6 |
| پن 8 | VIN7 — Analog input channel 7 |
| پن 9 | AGND — Analog ground |
| پن 10 | REF — Reference voltage input |
| پن 11 | VREF — Reference bypass / buffered reference output |
| پن 12 | AVDD — Analog +5 V supply |
| پن 13 | DVDD — Digital +5 V supply |
| پن 14 | DGND — Digital ground |
| پن 15 | A0 — MUX address line 0 (LSB) |
| پن 16 | A1 — MUX address line 1 |
| پن 17 | A2 — MUX address line 2 (MSB) |
| پن 18 | WR — Write control input (active low) |
| پن 19 | RD — Read control input (active low) |
| پن 20 | CS — Chip select (active low) |
| پن 21 | D0 — Data output bit 0 (LSB) |
| پن 22 | D1 — Data output bit 1 |
| پن 23 | D2 — Data output bit 2 |
| پن 24 | D3 — Data output bit 3 |
| پن 25 | D4 — Data output bit 4 |
| پن 26 | D5 — Data output bit 5 |
| پن 27 | D6 — Data output bit 6 |
| پن 28 | D7 — Data output bit 7 |
عام استعمالات
ADC10158CIN/NOPB کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Multi-Channel Data Acquisition Systems, Portable Battery-Powered Instrumentation, Process Control Analog Input Modules, Embedded Sensor Reading Subsystems, Legacy PCB Repair and Retrocomputing Projects, Test and Measurement Equipment Front-Ends.
Industrial Multi-Channel Data Acquisition Systems
The ADC10158CIN/NOPB's integrated 8-channel analog multiplexer and 10-bit plus-sign SAR architecture are ideal for industrial PLCs, distributed control systems (DCS), and panel meters that must monitor many process sensors (4-20 mA loops, 0-10 V transducer outputs, RTD-conditioned signals). The 28-DIP through-hole form factor simplifies assembly on legacy I/O cards that use plated-through-hole pads, and the parallel microprocessor-compatible output bus drops directly onto an 8051, PIC, or 80C186 data bus without a glue logic layer. The single +5 V supply aligns with industrial 5 V backplane rails, eliminating the need for a separate analog LDO. The on-chip track-and-hold and break-before-make MUX switching keep channel-to-channel settling errors under one LSB at the datasheet's recommended operating point.
تجویز کردہ
Portable Battery-Powered Instrumentation
The ADC10158CIN/NOPB operates from a single +5 V supply drawing low operating current, making it suitable for handheld digital multimeters, portable data loggers, and field-calibration instruments where battery life is critical. The single +5 V rail simplifies power tree design - a single boost converter can derive the analog and digital supply. The DIP-28 package is friendly to hand-soldering for prototype builds and one-off repair of legacy portable test equipment. The 10-bit plus-sign resolution (1024 + sign codes = 2048 effective codes) gives ~0.05% step resolution, which is sufficient for most process-control transducer readouts, though 12-bit ADCs (e.g., AD7798) are preferred for precision lab work.
تجویز کردہ
Process Control Analog Input Modules
The ADC10158CIN/NOPB is a classic choice for rack-mounted process-control analog input modules that aggregate 4-8 process variables (temperature, pressure, flow, level) per board. The integrated MUX eliminates an external 8:1 analog switch (saving BOM cost and board space), and the SAR architecture gives deterministic single-shot conversion latency - critical for closed-loop PID control where pipeline delay from a sigma-delta or pipelined ADC would complicate loop tuning. The 5 V supply and industrial -40 C/+85 C operating range are well-matched to DIN-rail I/O modules and PLC backplanes. Parallel output drops straight into the module's microcontroller data bus without DMA complexity.
تجویز کردہ
Embedded Sensor Reading Subsystems
In embedded sensor-reading applications, the ADC10158CIN/NOPB's 8-channel MUX and parallel output reduce the cost-per-sensor-channel to under $1 per channel (at 1k qty), well-suited for HVAC controllers, building-automation sensors, and appliance control boards. The 28-DIP through-hole package is also widely used in educational lab kits and university embedded-systems courses, because students can breadboard and probe every signal pin. The /NOPB lead-free finish meets modern RoHS requirements for consumer and industrial end products shipped into the EU.
تجویز کردہ
Legacy PCB Repair and Retrocomputing Projects
The ADC10158CIN/NOPB's 28-DIP through-hole footprint makes it the de-facto replacement part for legacy 1990s-era ISA-bus data-acquisition cards, retrocomputing audio interfaces, and legacy instrumentation front-ends. The DIP-28 package is breadboard-compatible and socket-compatible, which simplifies field repair without PCB rework. Hobbyist retrocomputing and vintage-computer restoration projects (e.g., vintage synthesizer CV-to-digital boards) commonly use the ADC10158 because it is still actively produced by the manufacturer and stocked at major distributors. Same-die compatibility with the through-hole and SMD variants (PDIP-28 and SOIC-28) preserves the option to upgrade an existing board to SMD without firmware changes.
تجویز کردہ
Test and Measurement Equipment Front-Ends
Bench-top digital multimeters, oscilloscope front-end signal-conditioning boards, and laboratory data-logging front-ends commonly use the ADC10158CIN/NOPB because of its deterministic single-shot SAR latency, integrated 8-channel MUX, and 5 V single-supply operation. The 10-bit plus-sign resolution gives 11-bit effective dynamic range (~66 dB) - sufficient for general-purpose bench instrumentation though not for high-precision metrology. The 28-DIP package simplifies fixture-based calibration since the IC can be socketed and replaced without desoldering.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADC10158CIN/NOPB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADC10154CIN/NOPB | ADC10158CIWM/NOPB | ADC10158CIN |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin PDIP (DIP-28) through-hole | 28-pin PDIP (DIP-28) through-hole | 28-pin SOIC (WM) SMD | 28-pin PDIP (DIP-28) through-hole |
| Resolution | 10 bit + sign | 10 bit + sign | 10 bit + sign | 10 bit + sign |
| Number of Input Channels | 8 single-ended / 4 differential | 4 single-ended / 2 differential | 8 single-ended / 4 differential | 8 single-ended / 4 differential |
| Analog Supply | +5 V single supply | +5 V single supply | +5 V single supply | +5 V single supply |
| Output Interface | Parallel | Parallel | Parallel | Parallel |
| Lead-Free Finish | Yes (/NOPB) | Yes (/NOPB) | Yes (/NOPB) | No (legacy SnPb) |
| Operating Temperature | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) |
اہم امتیازی خصوصیات
- On-chip 8-input analog MUX eliminates external analog switch IC (بمقابلہADC10154CIN/NOPB)
- Through-hole PDIP-28 form factor for legacy and prototype boards (بمقابلہADC10158CIWM/NOPB)
- Lead-free /NOPB RoHS-compliant finish (بمقابلہADC10158CIN (no suffix))
ڈیزائن نوٹس
The ADC10158CIN/NOPB requires a low-noise +5 V analog supply (AVDD) separate from the noisy digital +5 V (DVDD). Tie both supplies to the same +5 V rail at the PCB entry point (single LDO output), and decouple each AVDD/DVDD pin with a 10 uF tantalum + 0.1 uF ceramic pair placed within 1 cm of the pin. Estimated: at 5 V supply drawing typical 10 mA, each supply pin dissipates ~50 mW - no thermal concerns even in the 28-DIP package.
Route analog input traces (CH0-CH7) and the REF input on a separate inner layer isolated by AGND/DGND planes. Keep digital output bus traces (D0-D9, RD, WR, CS) on the opposite side of the PCB and never cross analog traces. Place the reference bypass capacitor on pin 11 within 5 mm of the package; a 10 uF + 0.1 uF pair is typical per TI datasheet recommendations. Avoid running digital traces parallel to analog traces for more than 10 mm - cross only at 90-degree.
Do not omit the reference bypass capacitor on pin 11 - the ADC will oscillate or exhibit excessive INL without it. Do not apply analog inputs above AVDD + 0.3 V or below AGND - 0.3 V, as the input ESD diodes will forward-conduct and degrade the channel. Do not leave the MCMC chip select (CS) pin floating - tie it inactive (logic high) for the unused ADC state. Estimated: when reading through 8 sequential channels at full throughput, the worst-case channel-to-channel settling error is approximately 1 LSB if the MCMC settling time meets the datasheet specification.
تعمیل کی معلومات
RoHS compliant per /NOPB suffix (No Pb). Not AEC-Q100 qualified - this is an industrial-grade part. Lead-free matte-tin finish confirmed.
