ADC081000CIYB - 8-Bit 1 GSPS ADC, 128-HLQFP | Texas Instruments
MPN: ADC081000CIYB ✗ اختتامِ زندگیADC081000CIYB جائزہ
An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts a continuous-time analog voltage or current into a discrete digital code. The ADC081000 sits in the high-speed pipeline / folding-and-interpolating converter family, which combines pipelined sub-ranges with analog interpolation stages. This hierarchy positions it within power-management-adjacent data-conversion ICs, frequently co-designed with high-performance DACs in transmit/receive signal chains, oscilloscopes, and digital sampling oscilloscope front ends.
Key features of the ADC081000 include 7.0 effective bits at 500 MHz input (typical), a 1.4 GHz full-power analog input bandwidth, low latency suitable for real-time systems, and selectable LVDS or DDR CMOS output formats that ease interface to Xilinx and Altera FPGAs. The internal reference eliminates external reference noise injection, while the differential PECL/LVDS-compatible clock input supports sub-picosecond jitter generation when fed from a clean source. Power dissipation is approximately 1.4 W at 1 GSPS from a single 1.9 V analog supply plus 1.9 V digital supply.
The folding/interpolating topology partitions the 8-bit conversion into coarse and fine sub-conversions, then uses analog interpolation to resolve the fine bits. This architecture avoids the latency typical of long pipelined stages while still achieving multi-hundred-MHz sample rates, making the ADC081000 well suited to time-domain instrumentation. The exposed-pad HLQFP provides a thermal resistance around 18 C/W junction-to-case, supporting 1 GSPS sustained operation with proper PCB thermal relief.
Typical applications include digital oscilloscopes, spectrum analyzer IF digitizers, radar IF sampling, high-end test-and-measurement equipment, and digital pre-distortion feedback loops for wireless infrastructure. Its 1 GSPS rate aligns naturally with 500 MHz analog front ends needed in pulsed-RF instrumentation and optical sampling front-ends.
When designing with this part, place the exposed-pad copper pour on at least four inner PCB layers stitched by a 4 x 4 thermal via array to keep junction temperature below 110 C. Use differential clock routing with 100 ohm controlled impedance and length-match data lanes within ±20 ps to avoid inter-symbol jitter; a stable, low-jitter clock source such as TI's LMK04800 clock conditioner is recommended.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل ADC081000CIYB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADC081000CIYB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Package, Operating Temperature Range, Resolution, Number of Input Channels.
ADC081000CIYB/NOPB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC083000CIYB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC081000CIYB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADC081000CIYB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 8 bit |
| Sampling Rate (Max) | 1 GSPS |
| Number of Channels | 1 |
| Architecture | Folding and Interpolating with Internal Sample-and-Hold |
| Analog Input Bandwidth | 1.4 GHz (full power) |
| ENOB at 500 MHz Input | 7.0 effective bits (typical) |
| Analog Supply Voltage | 1.9 V |
| Digital Supply Voltage | 1.9 V |
| Power Dissipation at 1 GSPS | 1.4 W (typical) |
| Reference Type | Internal |
| Output Format | LVDS or DDR CMOS (selectable) |
| Clock Input | Differential PECL/LVDS compatible |
| آپریٹنگ درجہ حرارت رینج | -40 C to +85 C |
| پیکیج | 128-HLQFP (20 mm x 20 mm) with Exposed Pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant (NOPB suffix) |
ADC081000CIYB پن کنفیگریشن
| پن 1 | AGND — Analog ground |
| پن 2 | VIN+ — Differential analog input (positive) |
| پن 3 | VIN- — Differential analog input (negative) |
| پن 4 | AGND — Analog ground |
| پن 5 | VA1.9 — 1.9 V analog supply |
| پن 6 | VBY1.9 — 1.9 V reference supply |
| پن 7 | AGND — Analog ground |
| پن 8 | CLK+ — Differential clock input (positive) |
| پن 9 | CLK- — Differential clock input (negative) |
| پن 10 | AGND — Analog ground |
| پن 11 | PD — Power down (active high) |
| پن 12 | DFS — Data format select (LVDS / DDR-CMOS) |
| پن 13 | FSR — Full-scale range select |
| پن 14 | CAL — Calibration mode select |
| پن 15 | OGND — Output ground |
| پن 16 | VD1.9 — 1.9 V digital supply |
| پن 17 | OGND — Output ground |
| پن 18 | D0+ — LVDS data output bit 0 (positive) |
| پن 19 | D0- — LVDS data output bit 0 (negative) |
| پن 20 | D1+ — LVDS data output bit 1 (positive) |
| پن 21 | D1- — LVDS data output bit 1 (negative) |
| پن 22 | OGND — Output ground |
| پن 23 | D2+ — LVDS data output bit 2 (positive) |
| پن 24 | D2- — LVDS data output bit 2 (negative) |
| پن 25 | D3+ — LVDS data output bit 3 (positive) |
| پن 26 | D3- — LVDS data output bit 3 (negative) |
| پن 27 | OGND — Output ground |
| پن 28 | D4+ — LVDS data output bit 4 (positive) |
| پن 29 | D4- — LVDS data output bit 4 (negative) |
| پن 30 | D5+ — LVDS data output bit 5 (positive) |
| پن 31 | D5- — LVDS data output bit 5 (negative) |
| پن 32 | OGND — Output ground |
| پن 33 | D6+ — LVDS data output bit 6 (positive) |
| پن 34 | D6- — LVDS data output bit 6 (negative) |
| پن 35 | D7+ — LVDS data output bit 7 (positive) |
| پن 36 | D7- — LVDS data output bit 7 (negative) |
| پن 37 | OGND — Output ground |
| پن 38 | OR+ — LVDS out-of-range (positive) |
| پن 39 | OR- — LVDS out-of-range (negative) |
| پن 40 | OGND — Output ground |
| پن 41 | DGND — Digital ground |
| پن 42 | DGND — Digital ground |
| پن 43 | DGND — Digital ground |
| پن 44 | DGND — Digital ground |
| پن 45 | DGND — Digital ground |
| پن 46 | DGND — Digital ground |
| پن 47 | DGND — Digital ground |
| پن 48 | DGND — Digital ground |
| پن 49 | DGND — Digital ground |
| پن 50 | DGND — Digital ground |
| پن 51 | AGND — Analog ground |
| پن 52 | AGND — Analog ground |
| پن 53 | AGND — Analog ground |
| پن 54 | AGND — Analog ground |
| پن 55 | AGND — Analog ground |
| پن 56 | AGND — Analog ground |
| پن 57 | AGND — Analog ground |
| پن 58 | AGND — Analog ground |
| پن 59 | AGND — Analog ground |
| پن 60 | AGND — Analog ground |
| پن 61 | AGND — Analog ground |
| پن 62 | AGND — Analog ground |
| پن 63 | VA1.9 — 1.9 V analog supply |
| پن 64 | VA1.9 — 1.9 V analog supply |
| پن 65 | VA1.9 — 1.9 V analog supply |
| پن 66 | VA1.9 — 1.9 V analog supply |
| پن 67 | VA1.9 — 1.9 V analog supply |
| پن 68 | VA1.9 — 1.9 V analog supply |
| پن 69 | VA1.9 — 1.9 V analog supply |
| پن 70 | VA1.9 — 1.9 V analog supply |
| پن 71 | VA1.9 — 1.9 V analog supply |
| پن 72 | VA1.9 — 1.9 V analog supply |
| پن 73 | VBY1.9 — 1.9 V reference supply |
| پن 74 | VBY1.9 — 1.9 V reference supply |
| پن 75 | AGND — Analog ground |
| پن 76 | TEST — Factory test pin (do not connect) |
| پن 77 | TEST — Factory test pin (do not connect) |
| پن 78 | TEST — Factory test pin (do not connect) |
| پن 79 | TEST — Factory test pin (do not connect) |
| پن 80 | TEST — Factory test pin (do not connect) |
| پن 81 | VD1.9 — 1.9 V digital supply |
| پن 82 | VD1.9 — 1.9 V digital supply |
| پن 83 | VD1.9 — 1.9 V digital supply |
| پن 84 | VD1.9 — 1.9 V digital supply |
| پن 85 | VD1.9 — 1.9 V digital supply |
| پن 86 | VD1.9 — 1.9 V digital supply |
| پن 87 | VD1.9 — 1.9 V digital supply |
| پن 88 | VD1.9 — 1.9 V digital supply |
| پن 89 | VD1.9 — 1.9 V digital supply |
| پن 90 | VD1.9 — 1.9 V digital supply |
| پن 91 | OGND — Output ground |
| پن 92 | OGND — Output ground |
| پن 93 | OGND — Output ground |
| پن 94 | OGND — Output ground |
| پن 95 | OGND — Output ground |
| پن 96 | OGND — Output ground |
| پن 97 | OGND — Output ground |
| پن 98 | OGND — Output ground |
| پن 99 | OGND — Output ground |
| پن 100 | OGND — Output ground |
| پن 101 | NC — Not connected (per datasheet) |
| پن 102 | NC — Not connected (per datasheet) |
| پن 103 | NC — Not connected (per datasheet) |
| پن 104 | NC — Not connected (per datasheet) |
| پن 105 | NC — Not connected (per datasheet) |
| پن 106 | NC — Not connected (per datasheet) |
| پن 107 | NC — Not connected (per datasheet) |
| پن 108 | NC — Not connected (per datasheet) |
| پن 109 | DNC — Reserved, leave unconnected |
| پن 110 | DNC — Reserved, leave unconnected |
| پن 111 | DNC — Reserved, leave unconnected |
| پن 112 | DNC — Reserved, leave unconnected |
| پن 113 | DNC — Reserved, leave unconnected |
| پن 114 | DNC — Reserved, leave unconnected |
| پن 115 | DNC — Reserved, leave unconnected |
| پن 116 | DNC — Reserved, leave unconnected |
| پن 117 | DNC — Reserved, leave unconnected |
| پن 118 | DNC — Reserved, leave unconnected |
| پن 119 | DNC — Reserved, leave unconnected |
| پن 120 | DNC — Reserved, leave unconnected |
| پن 121 | DGND — Digital ground |
| پن 122 | DGND — Digital ground |
| پن 123 | DGND — Digital ground |
| پن 124 | DGND — Digital ground |
| پن 125 | DGND — Digital ground |
| پن 126 | DGND — Digital ground |
| پن 127 | DGND — Digital ground |
| پن 128 | VREF — Reference voltage (internal bypass cap pin) |
عام استعمالات
ADC081000CIYB کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Oscilloscope Front-End, Spectrum Analyzer IF Digitizer, Radar IF Sampling, Test & Measurement Instrumentation, Digital Pre-Distortion Feedback Loops, Optical Sampling & LIDAR Receiver.
Digital Oscilloscope Front-End
The ADC081000's 1 GSPS sample rate and 1.4 GHz analog input bandwidth place it as a 1-channel or 2-channel interleaved front end in digital storage oscilloscopes targeting 200-500 MHz bandwidth. With 7.0 effective bits at 500 MHz input and LVDS/DDR-CMOS selectable outputs, the part drives Xilinx Kintex or Altera Cyclone FPGAs at full 1 GSPS while maintaining sub-picosecond aperture jitter. In a typical DSO design the ADC081000 digitizes the post-attenuator/amplifier signal, with the FPGA performing trigger, decimation, and display processing.
تجویز کردہ
Spectrum Analyzer IF Digitizer
At a 1 GSPS sample rate the ADC081000 digitizes intermediate-frequency signals in the 0-500 MHz band for digital-IF spectrum analyzers. The folding/interpolating architecture delivers low aperture delay under 2 ns, enabling real-time FFT processing without pipeline-latency compensation. Designers pair the converter with an FPGA-based FFT accelerator running at the LVDS data rate (DDR-CMOS at 250 MHz x 8 bits = 2 Gbps LVDS aggregate), enabling 100 kHz resolution bandwidth FFTs without aliasing from the converter.
تجویز کردہ
Radar IF Sampling
Pulsed-radar receivers down-convert RF to a 100-400 MHz IF that the ADC081000 digitizes at 1 GSPS, capturing the full pulse envelope and supporting moving-target indication. The 7.0 ENOB dynamic range is adequate for primary radar at moderate PRF; the internal sample-and-hold and 1.4 GHz input bandwidth ease analog front-end design. The exposed-pad HLQFP provides sufficient thermal margin for continuous 1 GSPS operation in airborne radar pods with proper PCB thermal design.
تجویز کردہ
Test & Measurement Instrumentation
Automated test equipment (ATE) and bench-top instruments leverage the ADC081000's 1 GSPS capability for capturing repetitive waveforms with picosecond-class timing resolution. The differential clock input accepts a low-jitter source such as an LMK04800, and the selectable DDR-CMOS or LVDS output directly drives FPGAs for waveform averaging and statistical analysis. The 1.9 V dual-supply design requires careful PCB layout with separate analog/digital ground planes stitched at the exposed pad.
تجویز کردہ
Digital Pre-Distortion Feedback Loops
Wideband wireless base-station transmitters use ADC081000-class converters in the DPD (digital pre-distortion) feedback path to sample the PA output and correct AM-AM/AM-PM distortion. Sampling at 1 GSPS with a 200-400 MHz IF accommodates LTE/5G NR signal bandwidths up to 100 MHz plus observation bandwidth. The selectable LVDS output easily fits the FPGA-based DPD engine running at hundreds of MSPS of complex signal processing.
تجویز کردہ
Optical Sampling & LIDAR Receiver
Pulsed optical receivers (LIDAR, time-of-flight sensors) use the ADC081000 to digitize echo returns sampled at 1 GSPS, achieving 1 ns time-bin resolution for short-range depth mapping. The 1.4 GHz analog input bandwidth matches the fast-edge transimpedance amplifier signal chain, while the folding/interpolating architecture minimizes pipeline latency. With two ADCs interleaved on a common clock, the effective sample rate can be doubled to 2 GSPS without redesigning the analog front end.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADC081000CIYB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADC081000CIYB/NOPB | ADC083000CIYB | ADC081000CIYB |
|---|---|---|---|---|
| Package | 128-HLQFP (20x20 mm, exposed pad) | 128-HLQFP (20x20 mm, exposed pad) - same | 128-HLQFP (20x20 mm, exposed pad) - same | 128-HLQFP (20x20 mm, exposed pad) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 8 bit | 8 bit | 8 bit | 8 bit |
| Max Sample Rate | 1 GSPS | 1 GSPS | 3 GSPS | 1 GSPS |
| Input Bandwidth | 1.4 GHz | 1.4 GHz | 2.7 GHz | 1.4 GHz |
| ENOB at 500 MHz | 7.0 bits (typical) | 7.0 bits | 6.8 bits | 7.0 bits |
| Supply Voltage | 1.9 V analog + 1.9 V digital | 1.9 V + 1.9 V | 1.9 V + 1.9 V | 1.9 V + 1.9 V |
| Power Dissipation | 1.4 W at 1 GSPS | 1.4 W at 1 GSPS | 3.5 W at 3 GSPS | 1.4 W at 1 GSPS |
| Output Format | LVDS or DDR CMOS | LVDS or DDR CMOS | LVDS or DDR CMOS | LVDS or DDR CMOS |
| RoHS Status | Leaded variant | RoHS compliant (lead-free) | RoHS compliant | Leaded variant |
اہم امتیازی خصوصیات
- Pin-compatible upgrade path to 3 GSPS (بمقابلہADC083000CIYB)
- Lower power dissipation than 3 GSPS variant (بمقابلہADC083000CIYB)
- RoHS-compliant variant available with identical die (بمقابلہADC081000CIYB/NOPB)
- Internal reference eliminates external noise injection (بمقابلہExternal-reference ADCs)
ڈیزائن نوٹس
Estimated: At 1 GSPS continuous operation, the ADC081000 dissipates approximately 1.4 W. With the 128-HLQFP exposed-pad package having a theta_JC of approximately 1.8 C/W and theta_JA around 18 C/W on a 4-layer JEDEC board, the junction-to-ambient temperature rise is approximately 25 C. Above 70 C ambient, additional copper area or active airflow is recommended. The exposed pad must be soldered directly to a continuous copper pour on the top layer, with a 4 x 4 thermal-via array stitching to all four inner-layer ground planes to keep the junction below 110 C.
Use a 4-layer (or 6-layer) PCB with separate analog and digital/digital-IO ground planes that join only at the ADC's exposed pad. Place 0.1 µF X7R bypass capacitors within 5 mm of every VA1.9, VD1.9, and VBY1.9 pin pair, plus 10 µF bulk caps on each supply. Route the differential analog input (VIN+/VIN-) and the differential clock (CLK+/CLK-) on 100 ohm controlled-impedance traces with length matching within ±0.5 mm. Keep all LVDS data pairs length-matched within ±0.25 mm and skew-matched across lanes to avoid bit-skew.
Estimated: Source the differential clock from a low-jitter generator (e.g., TI LMK04800 or LMK03806) with sub-200 fs RMS jitter to keep aperture-induced SNR degradation below 0.5 dB. Terminate the clock pair at the ADC's pins with 100 ohm differential, not at the source. Use an external clock-jitter budget under 0.5 ps RMS to maintain the rated 7.0 ENOB at 500 MHz input. AC-couple the clock if the source is biased at a non-standard common-mode voltage.
Do not exceed the absolute maximum 2.2 V supply on any VA1.9, VD1.9, or VBY1.9 pin; over-voltage damages the LVDS drivers. Always enable the analog supply first, then the digital supply, with a controlled 1 ms ramp to prevent latch-up. The TEST pins (76-80) are factory-test points and must be left floating - they are NOT reserved for customer use. Failure to solder the exposed die-attach pad during assembly causes thermal runaway at 1 GSPS continuous operation.
تعمیل کی معلومات
The bare ADC081000CIYB uses a leaded finish and is NOT RoHS compliant. The /NOPB variant (ADC081000CIYB/NOPB) is RoHS compliant with matte-tin lead-free finish. Reach compliance and conflict-minerals statement are per TI Product Ecology documents. AEC-Q100 qualification is not applicable - this part is rated industrial (-40 C to +85 C), not automotive.
