ADSP-21571CSWZ-4 - 450MHz Dual-Core SHARC+ DSP | ADI
MPN: ADSP-21571CSWZ-4 ✓ فعالADSP-21571CSWZ-4 جائزہ
A digital signal processor is a specialized semiconductor that executes mathematical operations in parallel using a SIMD architecture. The ADSP-21571 belongs to the SHARC+ processor family, which combines two high-performance signal-processing cores with dedicated peripherals for demanding industrial, communications, audio, and control applications. Its architecture is designed to reduce instruction overhead in filter, FFT, modulation, and other data-intensive algorithms.
Principal features include two SHARC+ cores operating at 450 MHz, support for fixed-point and floating-point arithmetic, and integration in a 176-LQFP-EP package. The processor is identified as part of the ADSP-SC571-class family, while the Analog Devices product page also describes the closely related ADSP-SC573 architecture as combining SHARC+ processing with an Arm Cortex-A5 core. Detailed core-count, memory, interface, voltage, and thermal parameters should be confirmed against the appropriate manufacturer documentation for the exact device variant.
The dual-core SIMD organization is the key architectural advantage. Workloads that can be partitioned across both SHARC+ cores can achieve greater throughput than a single-core implementation, while parallel data paths are well suited to real-time filtering and spectral analysis. Software design must still account for synchronization, inter-core communication, and deterministic execution requirements when splitting a signal-processing chain.
Typical uses include industrial motor and motion control, professional audio and communications processing, test and measurement instrumentation, embedded communications infrastructure, and real-time signal analysis. The 450 MHz operating point supports computationally intensive algorithms while the exposed-pad package provides a direct path for board-level heat dissipation.
For a robust PCB design, provide clean power rails, continuous ground-plane return paths, and thermal copper beneath the exposed pad. Confirm every power, decoupling, clock, and signal requirement against the manufacturer datasheet and reference design; a 176-pin mixed-signal processor requires careful high-speed routing and comprehensive layout review before production release.
This product overview consolidates the confirmed processor identity, package format, core architecture, and clock rate with practical guidance for PCB layout, thermal management, firmware architecture, and replacement planning.
کے لیے ڈراپ اِن متبادل ADSP-21571CSWZ-4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADSP-21571CSWZ-4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, DSP Core Count, Instruction Architecture, Processor Family, Product Type.
ADSP-21571BSWZ-4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADSP-21571CSWZ-5
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADSP-SC571BSWZ-4
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADSP-21571CSWZ-4 تفصیلات
| Product Type | Fixed/Floating Point Digital Signal Processor |
| Processor Family | SHARC+ SIMD DSP |
| DSP Core Count | 2 SHARC+ cores |
| Clock Frequency | 450 MHz |
| Architecture | Super Harvard Architecture |
| Arithmetic Support | Fixed-point and floating-point |
| پیکیج | 176-LQFP-EP, 24 x 24 mm |
| پن کی تعداد | 176 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Exposed Pad | Present |
| Instruction Architecture | SIMD |
| Core Type | SHARC+ |
| Product Class | Digital Signal Processors and Controllers |
| Manufacturer | Analog Devices |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
ADSP-21571CSWZ-4 176-lqfp-ep, 24 x 24 mm پن کنفیگریشن گائیڈ
ADSP-21571CSWZ-4 (176-lqfp-ep, 24 x 24 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADSP-21571CSWZ-4.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADSP-21571CSWZ-4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor and Motion Control, Digital Filtering and Spectrum Analysis, Professional Audio Processing, Communications Signal Processing, Test and Measurement Instrumentation, Industrial Imaging and Sensor Processing.
Industrial Motor and Motion Control
The ADSP-21571CSWZ-4 is suitable for real-time motor-control systems that combine sampling, digital filtering, and supervisory algorithms. Its two 450 MHz SHARC+ cores can partition time-critical signal processing from control or communication tasks, while SIMD execution supports efficient block-processing operations. The 176-LQFP exposed-pad package also offers a defined thermal path for compact industrial controller boards. Implementation should use the manufacturer's reference power architecture and hardware design guide, preserve deterministic timing, and validate encoder, current-sense, communication, and fault-response paths during bring-up.
تجویز کردہ
Digital Filtering and Spectrum Analysis
The ADSP-21571CSWZ-4 supports demanding FIR, IIR, adaptive-filter, and spectral-analysis workloads by applying SIMD instructions across multiple data lanes. Two SHARC+ cores at 450 MHz can improve throughput when a filter bank or analysis pipeline is divided into independent channels. The processor is appropriate for instrumentation and embedded signal-processing products where deterministic latency and numerical control matter. Designers should partition data carefully between cores, use the supported development environment, and verify coefficient formats, scaling, and real-time execution margins for the selected algorithm set.
تجویز کردہ
Professional Audio Processing
The ADSP-21571CSWZ-4 can serve as the central processing engine in professional audio equipment requiring high-throughput filtering, mixing, equalization, or sample-rate conversion. Two 450 MHz SHARC+ cores allow audio channels or processing stages to run in parallel, while SIMD operations improve the efficiency of repetitive block calculations. In a clock-sensitive audio design, use the manufacturer clocking and interface guidance, isolate sensitive analog sections, and keep high-current switching circuitry away from converter and signal-processing routing to minimize system-level noise coupling.
تجویز کردہ
Communications Signal Processing
The ADSP-21571CSWZ-4 is applicable to communications equipment that performs real-time modulation, demodulation, channel filtering, or packet-signal preprocessing. The two 450 MHz SHARC+ cores can execute SIMD-oriented algorithms concurrently, helping organize a pipeline from digital conversion through filtering and data transfer. Exact peripheral and interface availability must be matched to the communications architecture before design commitment. The system should include controlled clock distribution, impedance-controlled connections, return-path continuity, and firmware checks for overflow or real-time constraint violations.
تجویز کردہ
Test and Measurement Instrumentation
The ADSP-21571CSWZ-4 is well matched to modular test and measurement products that combine acquisition, real-time analysis, and control functions. Its dual 450 MHz SHARC+ architecture can accelerate FFT processing, calibration routines, digital filtering, and data reduction while maintaining deterministic execution. The exposed-pad LQFP package requires careful thermal design but supports compact instrument electronics. Validate clock-jitter sensitivity, data-converter interface timing, grounding, and acquisition-buffer behavior before production, and use the manufacturer's benchmark and application material to establish realistic performance expectations.
تجویز کردہ
Industrial Imaging and Sensor Processing
The ADSP-21571CSWZ-4 can support embedded vision and sensor-processing systems that perform filtering, feature conditioning, or signal analysis close to the acquisition hardware. Parallel SHARC+ cores at 450 MHz allow multiple data streams or algorithm stages to be processed concurrently, reducing the need to transmit raw data to a host processor. The design should define buffering and overflow-handling policies, use deterministic frame timing, and keep high-speed data routes away from sensitive analog inputs. Thermal testing at maximum processor activity is important because the exposed pad must dissipate internal losses into the PCB.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADSP-21571CSWZ-4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADSP-21571BSWZ-4 | ADSP-21571CSWZ-5 | ADSP-SC571BSWZ-4 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) |
| Product Type | Digital Signal Processor | Digital Signal Processor | Digital Signal Processor | Digital Signal Processor |
| Architecture | SHARC+ SIMD with Super Harvard Architecture | SHARC+ SIMD | SHARC+ SIMD | SHARC processor family |
| Pin Count | 176 pins | 176 pins | 176 pins | 176 pins |
اہم امتیازی خصوصیات
- Confirmed 450 MHz operating point (بمقابلہADSP-21571BSWZ-4)
- Two-core SHARC+ SIMD processing (بمقابلہADSP-SC571BSWZ-4)
- Same-package family substitution path (بمقابلہADSP-21571CSWZ-5)
ڈیزائن نوٹس
Treat the exposed pad as the primary thermal path and follow the manufacturer land pattern exactly. Provide uninterrupted copper beneath the package, secure the pad with the specified solder-paste geometry, and inspect for assembly voids after reflow. Maximum processor activity and the highest permitted ambient temperature should be included in thermal validation, since package performance depends on effective heat transfer through the PCB rather than airflow alone.
Use the manufacturer power-supply and decoupling guidance for every supply rail. Place required bulk and high-frequency capacitors at the specified pins with short, low-inductance paths, and preserve a continuous ground reference beneath high-speed interfaces. Review all 176 signal connections against the official pin-description table and land pattern before releasing the PCB artwork.
Route clocks and high-speed interfaces with controlled impedance and avoid splitting return currents beneath signal paths. Keep switching-regulator loops compact and separated from sensitive clocks and data buses, and route external clock sources with short paths away from switching nodes. Apply the manufacturer's reference design as the baseline for topology and then adapt only the necessary board-level integration.
Do not treat identical package dimensions as proof of drop-in equivalence. Before replacing the CSWZ-4 ordering code with ADSP-21571BSWZ-4, ADSP-21571CSWZ-5, or ADSP-SC571BSWZ-4, verify clock grade, temperature range, memory map, peripheral assignments, boot behavior, exposed-pad connections, and software support. This prevents a board-level mismatch from appearing only after firmware deployment.
تعمیل کی معلومات
Compliance status was not stated in the manufacturer product-page excerpt or distributor records and must be confirmed for the exact ordering code.