EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs
MPN: EFM32TG108F32-QFN24T ✓ فعالEFM32TG108F32-QFN24T جائزہ
A low-power microcontroller is a processor integrated with memory, I/O, timers, and communication peripherals for control-oriented products. The EFM32TG platform emphasizes short wake-up periods and low consumption in both active and sleep states. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making it useful where battery life, sleep current, and rapid reactivation are important.
The EFM32TG108F32-QFN24T combines a 32 MHz Cortex-M3 core with 32 KB Flash and 4 KB RAM. Its integrated feature set includes 17 digital I/O pins and two 16-bit timers. The 24-QFN package measures 5 mm on each side, supporting compact layouts without requiring a large through-hole or high-pin-count package. The operating supply range of 1.85 V to 3.8 V accommodates common low-voltage embedded systems.
Its low-power architecture combines normal processing with energy-saving modes and relatively short wake-up times. This makes the MCU suitable for systems that spend substantial time idle but must respond promptly to sensor, communication, or user-interface events. Peripheral integration reduces external component count in designs that require timing, general-purpose I/O, and embedded control functions. The Cortex-M3 architecture also provides a 32-bit processing environment while retaining a compact software model for embedded firmware.
Typical applications include battery-powered sensor nodes, compact industrial monitors, wearable accessories, low-energy IoT endpoints, and embedded control modules. The combination of 32 KB Flash and 4 KB RAM is appropriate for firmware featuring protocol handling, state management, and modest local data processing. The 17 available digital I/O pins also support switches, indicators, sensors, and discrete control signals.
Designers should calculate both average and peak supply demand, place decoupling capacitors close to the supply and ground pins, and confirm the exposed-pad connection and thermal layout against the manufacturer package drawing. Firmware should use the device's low-energy modes deliberately, because leaving the core active can consume substantially more power than the Stop-mode figure. The 1.85 V to 3.8 V range also requires attention to sensor and radio supply compatibility.
This product page combines the manufacturer specifications with package-level guidance, verified replacement candidates, comparison criteria, and practical implementation considerations. It helps engineers narrow a Tiny Gecko selection by core architecture, memory capacity, clock rate, pin count, package, supply voltage, and low-power behavior before completing a firmware and PCB design.
کے لیے ڈراپ اِن متبادل EFM32TG108F32-QFN24T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EFM32TG108F32-QFN24T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Flash Memory, Timers, Package, Digital I/O Pins, RAM.
EFM32TG108F32-D-QFN24
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32TG108F32-QFN24
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32TG110F16-QFN24T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EFM32HG108F32G-C-QFN24
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EFM32HG110F32G-A-QFN24
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EFM32ZG108F32-QFN24
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32TG108F32-QFN24T زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| کوئی تفصیلات دستیاب نہیں |
EFM32TG108F32-QFN24T standard پن کنفیگریشن گائیڈ
EFM32TG108F32-QFN24T (standard پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EFM32TG108F32-QFN24T.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EFM32TG108F32-QFN24T کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Node, Low-Energy IoT Endpoint, Wearable Accessory Controller, Compact Industrial Monitor, Low-Power Data Logger, Embedded Control Module.
Battery-Powered Sensor Node
The EFM32TG108F32-QFN24T fits battery-powered sensor nodes that must process readings while preserving standby endurance. Its 32 MHz ARM Cortex-M3 core supports local filtering and protocol handling, while 32 KB of Flash accommodates firmware, configuration, and calibration tables. The device can operate from 1.85 V to 3.8 V and may consume as little as 0.6 µA in Stop mode, allowing the controller to sleep between samples and wake for new measurements. Use low-energy scheduling, disable unused peripherals, and size the external storage only when the internal 4 KB RAM is insufficient.
تجویز کردہ
Low-Energy IoT Endpoint
The EFM32TG108F32-QFN24T is appropriate for compact IoT endpoints that periodically communicate through an external radio and must return quickly from a low-energy state. Its ARM Cortex-M3 processor operates up to 32 MHz, providing enough performance for protocol framing and local state management without a larger application processor. The 17 digital I/O pins can support a radio enable line, sensor interrupts, status indicators, and user inputs. The family-level Run consumption of 150 µA/MHz and Stop consumption of 0.6 µA make power-mode selection central to the design, especially when radio transmission dominates the energy budget.
تجویز کردہ
Wearable Accessory Controller
The EFM32TG108F32-QFN24T suits wearable accessories where board area, supply voltage, and standby current are tightly constrained. Its 24-QFN package measures 5 mm × 5 mm, while 17 digital I/O pins provide control and sensing connections in a compact layout. The 32 MHz Cortex-M3 core can service button events, haptic control, display updates, and wearable sensor logic. Low-power operation is especially important in accessories that spend long periods idle, making the Stop-mode figure of 0.6 µA a useful design target. Firmware should wake only for relevant interrupts and keep analog and communication blocks disabled during idle periods.
تجویز کردہ
Compact Industrial Monitor
The EFM32TG108F32-QFN24T can serve as the control MCU in a compact industrial monitor that combines digital sensors, status indicators, and periodic data capture. Its two 16-bit timers support timing, sampling, and periodic event generation, while the 17 digital I/O pins simplify connections to discrete inputs and outputs. The 1.85 V to 3.8 V operating range allows use with common low-voltage industrial front ends, subject to sensor and isolation requirements. In installations with long idle intervals, the device's low-power modes can reduce maintenance burden, but the final design must include appropriate transient protection and verify the power budget under worst-case operating conditions.
تجویز کردہ
Low-Power Data Logger
The EFM32TG108F32-QFN24T is well suited to a low-power data logger that stores periodic measurements and later transfers them through an external communication module. The 4 KB RAM supports short acquisition and buffering operations, while 32 KB Flash holds firmware and nonvolatile configuration. Two 16-bit timers can establish accurate sampling and transfer intervals, and the 17 digital I/O pins provide sensor selects or status signaling. Designers should use the Stop-mode capability during idle periods and account for flash write endurance when configuration or logged data is stored internally. External nonvolatile memory is appropriate when the application requires longer retention or frequent record updates.
تجویز کردہ
Embedded Control Module
The EFM32TG108F32-QFN24T can act as the central controller in a small embedded module controlling actuators, reading inputs, and coordinating system timing. Its Cortex-M3 core runs up to 32 MHz, providing responsive task execution for control loops and communication handling. The available 17 digital I/O pins are sufficient for typical mixed-signal peripheral interfaces when external conversion or isolation is added. Its 5 mm × 5 mm 24-QFN package supports compact module construction, while the 1.85 V to 3.8 V supply range simplifies integration with low-voltage logic. Place supply and ground decoupling close to the device and follow the manufacturer exposed-pad recommendation for reliable thermal performance.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EFM32TG108F32-QFN24T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EFM32TG108F32-D-QFN24 | EFM32TG108F32-QFN24 | EFM32TG110F16-QFN24T | EFM32HG108F32G-C-QFN24 | EFM32HG110F32G-A-QFN24 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5) | 24-QFN (5x5) - same | 24-QFN (5x5) - same | 24-QFN (5x5) - same | 24-QFN - same | 24-QFN - same |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 32 KB |
اہم امتیازی خصوصیات
- Higher memory capacity than the TG110 option (بمقابلہEFM32TG110F16-QFN24T)
- Manufacturer-identified revision-level drop-in path (بمقابلہEFM32TG108F32-D-QFN24)
- Cortex-M3 performance over Cortex-M0+ options (بمقابلہEFM32ZG108F32-QFN24)
ڈیزائن نوٹس
Build the power budget from the actual active duty cycle, not only the 150 µA/MHz Run-mode figure. Calculate sleeping current from the 0.6 µA Stop-mode value, then add sensor, radio, regulator, and leakage currents. Disable unused peripherals and avoid leaving the Cortex-M3 core active between events. Confirm that the power rail remains within 1.85 V to 3.8 V during wake-up and radio activity.
Place the required input and output decoupling capacitors close to the corresponding supply and ground pins, following the capacitor values and layout sequence in the Silicon Labs EFM32TG datasheet. Provide a low-impedance ground connection and thermal-via pattern for the exposed pad. Keep high-current or switching nodes away from sensitive signal routes and follow the package drawing for the exact 24-QFN land pattern.
Do not substitute EFM32TG110F16-QFN24T without reviewing firmware size because its 16 KB Flash is half the target device's 32 KB. Likewise, moving from Cortex-M3 to a Cortex-M0+ candidate can change startup behavior, peripheral implementation, and software dependencies. Confirm the complete pinout, brownout configuration, bootloader behavior, and exposed-pad connection before approving any alternate device.
تعمیل کی معلومات
Target-specific compliance declarations were not identified in the cited manufacturer product description or EFM32TG family datasheet.