Silicon Labs

EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs

부품 번호: EFM32TG108F32-QFN24T ✓ 활성
MOQ: 1 |

EFM32TG108F32-QFN24T 개요

Silicon Labs EFM32TG108F32-QFN24T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 mm × 5 mm package. Its 1.85 V to 3.8 V operating range and low-power architecture suit compact, energy-sensitive embedded systems. The device belongs to the microcontroller hierarchy that includes ARM Cortex-M3, embedded MCU, processor IC, and semiconductor.

A low-power microcontroller is a processor integrated with memory, I/O, timers, and communication peripherals for control-oriented products. The EFM32TG platform emphasizes short wake-up periods and low consumption in both active and sleep states. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making it useful where battery life, sleep current, and rapid reactivation are important.

The EFM32TG108F32-QFN24T combines a 32 MHz Cortex-M3 core with 32 KB Flash and 4 KB RAM. Its integrated feature set includes 17 digital I/O pins and two 16-bit timers. The 24-QFN package measures 5 mm on each side, supporting compact layouts without requiring a large through-hole or high-pin-count package. The operating supply range of 1.85 V to 3.8 V accommodates common low-voltage embedded systems.

Its low-power architecture combines normal processing with energy-saving modes and relatively short wake-up times. This makes the MCU suitable for systems that spend substantial time idle but must respond promptly to sensor, communication, or user-interface events. Peripheral integration reduces external component count in designs that require timing, general-purpose I/O, and embedded control functions. The Cortex-M3 architecture also provides a 32-bit processing environment while retaining a compact software model for embedded firmware.

Typical applications include battery-powered sensor nodes, compact industrial monitors, wearable accessories, low-energy IoT endpoints, and embedded control modules. The combination of 32 KB Flash and 4 KB RAM is appropriate for firmware featuring protocol handling, state management, and modest local data processing. The 17 available digital I/O pins also support switches, indicators, sensors, and discrete control signals.

Designers should calculate both average and peak supply demand, place decoupling capacitors close to the supply and ground pins, and confirm the exposed-pad connection and thermal layout against the manufacturer package drawing. Firmware should use the device's low-energy modes deliberately, because leaving the core active can consume substantially more power than the Stop-mode figure. The 1.85 V to 3.8 V range also requires attention to sensor and radio supply compatibility.

This product page combines the manufacturer specifications with package-level guidance, verified replacement candidates, comparison criteria, and practical implementation considerations. It helps engineers narrow a Tiny Gecko selection by core architecture, memory capacity, clock rate, pin count, package, supply voltage, and low-power behavior before completing a firmware and PCB design.

드롭인 대체품: EFM32TG108F32-QFN24T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: EFM32TG108F32-QFN24T (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Timers, Package, Digital I/O Pins, RAM.

Silicon Labs
Flash Memory: 16 KB
Timers: 2 × 16-bit timers
Package: 24-QFN, 5 mm × 5 mm
비교 대상: EFM32TG108F32-QFN24T →
Silicon Labs
Flash Memory: 32 kB
Timers: 2 x 16-bit timers
Package: 24-QFN (5 x 5 mm)
비교 대상: EFM32TG108F32-QFN24T →
Silicon Labs
Flash Memory: 32 kB (32K x 8)
Timers: 2 x 16-bit
Digital I/O Pins: 17
비교 대상: EFM32TG108F32-QFN24T →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Timers: 2 x 16-bit timers
Package: 24-QFN, 5 mm x 5 mm
비교 대상: EFM32TG108F32-QFN24T →
Silicon Labs
Flash Memory: 32 KB (32K × 8)
Timers: 2 × 16-bit
Package: 24-QFN (5 mm × 5 mm)
비교 대상: EFM32TG108F32-QFN24T →

EFM32TG108F32-D-QFN24

✅ 드롭인
Silicon Labs
📦 24-QFN (5x5)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 32 kB · 4 kB · 17 pins · 2 x 16-bit timers · 1.98 V to 3.8 V

가격 문의

데이터시트 보기 →

EFM32TG108F32-QFN24

✅ 드롭인
Silicon Labs
📦 24-QFN (5x5)
ARM Cortex-M3 · 32 MHz · 32 kB (32K x 8) · 4 kB · 17 · 2 x 16-bit · 1.98 V to 3.8 V · 24-QFN (5x5 mm) Exposed Pad

가격 문의

데이터시트 보기 →

EFM32TG110F16-QFN24T

✅ 드롭인
📦 24-QFN (5x5)
Flash memory is 16 KB versus 32 KB, a 50% reduction; clock speed and 24-QFN package remain 32 MHz and 24-QFN respectively.

📋 참조 대체품 (카탈로그에 없음)

EFM32HG108F32G-C-QFN24

✅ 드롭인
📦 24-QFN (5x5)
Uses a Cortex-M0+ rather than Cortex-M3 core; both provide 32 KB Flash in a 24-QFN format, but maximum clock and peripheral behavior differ.

📋 참조 대체품 (카탈로그에 없음)

EFM32HG110F32G-A-QFN24

✅ 드롭인
📦 24-QFN (5x5)
Uses a Cortex-M0+ core instead of Cortex-M3 while retaining 32 KB Flash in a 24-QFN package; processing and peripheral compatibility require validation.

📋 참조 대체품 (카탈로그에 없음)

EFM32ZG108F32-QFN24

✅ 드롭인
Silicon Labs
📦 24-QFN (5x5)
32-bit ARM Cortex-M0+ microcontroller (MCU) · EFM32 Zero Gecko · ARM Cortex-M0+ · 24 MHz · 32 KB (32K × 8) · 4 KB · 17 · 2 × 16-bit

가격 문의

데이터시트 보기 →

EFM32TG108F32-QFN24T 최대 정격 & 전기적 특성

사양 정보 없음

EFM32TG108F32-QFN24T standard 핀 구성 가이드

EFM32TG108F32-QFN24T(standard 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

EFM32TG108F32-QFN24T의 standard 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: EFM32TG108F32-QFN24T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

EFM32TG108F32-QFN24T 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Node, Low-Energy IoT Endpoint, Wearable Accessory Controller, Compact Industrial Monitor, Low-Power Data Logger, Embedded Control Module.

🧩

Battery-Powered Sensor Node

The EFM32TG108F32-QFN24T fits battery-powered sensor nodes that must process readings while preserving standby endurance. Its 32 MHz ARM Cortex-M3 core supports local filtering and protocol handling, while 32 KB of Flash accommodates firmware, configuration, and calibration tables. The device can operate from 1.85 V to 3.8 V and may consume as little as 0.6 µA in Stop mode, allowing the controller to sleep between samples and wake for new measurements. Use low-energy scheduling, disable unused peripherals, and size the external storage only when the internal 4 KB RAM is insufficient.

🌐

Low-Energy IoT Endpoint

The EFM32TG108F32-QFN24T is appropriate for compact IoT endpoints that periodically communicate through an external radio and must return quickly from a low-energy state. Its ARM Cortex-M3 processor operates up to 32 MHz, providing enough performance for protocol framing and local state management without a larger application processor. The 17 digital I/O pins can support a radio enable line, sensor interrupts, status indicators, and user inputs. The family-level Run consumption of 150 µA/MHz and Stop consumption of 0.6 µA make power-mode selection central to the design, especially when radio transmission dominates the energy budget.

📱

Wearable Accessory Controller

The EFM32TG108F32-QFN24T suits wearable accessories where board area, supply voltage, and standby current are tightly constrained. Its 24-QFN package measures 5 mm × 5 mm, while 17 digital I/O pins provide control and sensing connections in a compact layout. The 32 MHz Cortex-M3 core can service button events, haptic control, display updates, and wearable sensor logic. Low-power operation is especially important in accessories that spend long periods idle, making the Stop-mode figure of 0.6 µA a useful design target. Firmware should wake only for relevant interrupts and keep analog and communication blocks disabled during idle periods.

🏭

Compact Industrial Monitor

The EFM32TG108F32-QFN24T can serve as the control MCU in a compact industrial monitor that combines digital sensors, status indicators, and periodic data capture. Its two 16-bit timers support timing, sampling, and periodic event generation, while the 17 digital I/O pins simplify connections to discrete inputs and outputs. The 1.85 V to 3.8 V operating range allows use with common low-voltage industrial front ends, subject to sensor and isolation requirements. In installations with long idle intervals, the device's low-power modes can reduce maintenance burden, but the final design must include appropriate transient protection and verify the power budget under worst-case operating conditions.

📟

Low-Power Data Logger

The EFM32TG108F32-QFN24T is well suited to a low-power data logger that stores periodic measurements and later transfers them through an external communication module. The 4 KB RAM supports short acquisition and buffering operations, while 32 KB Flash holds firmware and nonvolatile configuration. Two 16-bit timers can establish accurate sampling and transfer intervals, and the 17 digital I/O pins provide sensor selects or status signaling. Designers should use the Stop-mode capability during idle periods and account for flash write endurance when configuration or logged data is stored internally. External nonvolatile memory is appropriate when the application requires longer retention or frequent record updates.

🔧

Embedded Control Module

The EFM32TG108F32-QFN24T can act as the central controller in a small embedded module controlling actuators, reading inputs, and coordinating system timing. Its Cortex-M3 core runs up to 32 MHz, providing responsive task execution for control loops and communication handling. The available 17 digital I/O pins are sufficient for typical mixed-signal peripheral interfaces when external conversion or isolation is added. Its 5 mm × 5 mm 24-QFN package supports compact module construction, while the 1.85 V to 3.8 V supply range simplifies integration with low-voltage logic. Place supply and ground decoupling close to the device and follow the manufacturer exposed-pad recommendation for reliable thermal performance.

추천 제품 요약

EFM32TG108F32-D-QFN24 Silicon Labs 사용처: Battery-Powered Sensor Node, Wearable Accessory Controller, Embedded Control Module EFM32TG110F16-QFN24T Lower-flash 24-QFN Tiny Gecko option 사용처: Battery-Powered Sensor Node, Compact Industrial Monitor, Embedded Control Module EFM32HG108F32G-C-QFN24 24-QFN low-power Cortex-M0+ controller alternative 사용처: Low-Energy IoT Endpoint, Low-Power Data Logger EFM32HG110F32G-A-QFN24 24-QFN 32 KB Flash controller alternative 사용처: Low-Energy IoT Endpoint, Low-Power Data Logger EFM32ZG108F32-QFN24 Silicon Labs 사용처: Wearable Accessory Controller EFM32TG108F32-QFN24 Silicon Labs 사용처: Compact Industrial Monitor
What are the key specifications of EFM32TG108F32-QFN24T?
The EFM32TG108F32-QFN24T is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 32 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. According to the Silicon Labs EFM32TG datasheet, it operates from 1.85 V to 3.8 V and is packaged in a 24-QFN measuring 5 mm × 5 mm. Its low-power platform also supports energy-saving modes and fast wake-up behavior.
What is the EFM32TG108F32-QFN24T used for?
The EFM32TG108F32-QFN24T is used for compact, energy-sensitive embedded control systems such as sensor nodes, industrial monitors, wearable devices, and low-power IoT equipment. Its 32 MHz Cortex-M3 core provides processing capacity, while 32 KB of Flash and 4 KB of RAM support moderate firmware and data requirements. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode.
How much power does the EFM32TG108F32-QFN24T consume?
The EFM32TG108F32-QFN24T can consume as little as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode, as stated in the Silicon Labs EFM32TG datasheet. Actual system consumption also depends on the operating frequency, enabled peripherals, output-pin loading, flash activity, and the duty cycle between active and low-energy states. Designers should measure the complete power budget instead of applying the Run-mode figure to the entire operating cycle.
Where can I download the EFM32TG108F32-QFN24T datasheet PDF?
The official EFM32TG108F32-QFN24T datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. The document covers the EFM32TG family, including the Cortex-M3 processor, memory configuration, peripherals, electrical characteristics, low-power operation, and package information. Use the device-specific product page and the pin-description table when assigning PCB signals.
Where can I find the EFM32TG108F32-QFN24T pinout?
The EFM32TG108F32-QFN24T pinout is defined in the pin-description table and package drawing in the Silicon Labs EFM32TG datasheet. The device uses a 24-QFN package with 17 digital I/O pins, power connections, ground connections, and exposed thermal pad. Use the manufacturer drawing for the exact numbering because exposed-pad and thermal connections should not be assigned as ordinary GPIO signals.
Where can I buy EFM32TG108F32-QFN24T online?
Use the Request a Quote form on this page to request the EFM32TG108F32-QFN24T, current availability, order quantity, and lead time. The form provides a direct purchasing route without relying on changing third-party listings. For engineering review, the manufacturer product page identifies the device as a 32 MHz Cortex-M3 Tiny Gecko MCU with 32 KB Flash and a 24-QFN package.
What is the price of EFM32TG108F32-QFN24T?
The current unit price and quantity breaks for the EFM32TG108F32-QFN24T should be requested through the Request a Quote form on this page. Pricing changes with quantity, availability, and order timing, so the form is the appropriate source for a current quotation. The quoted part is the 24-QFN, 32 MHz, 32 KB Flash device with the T ordering suffix.
What is the lead time for EFM32TG108F32-QFN24T?
Request the current lead time, minimum order quantity, and stock position through the Request a Quote form on this page. Lead time can change with production schedules, package demand, and order volume. The manufacturer product page confirms the EFM32TG108F32-QFN24 configuration, while the quote form supplies transaction-specific scheduling for the exact order.
Is the EFM32TG108F32-QFN24T in stock?
Current stock for the EFM32TG108F32-QFN24T should be confirmed through the Request a Quote form on this page. The form can return the quantity available for the requested reel or shipment configuration along with delivery timing. For prototype planning, the relevant ordering suffix is EFM32TG108F32-QFN24T and the package is 24-QFN at 5 mm × 5 mm.
What is the best drop-in replacement for EFM32TG108F32-QFN24T?
The closest same-family replacement is EFM32TG108F32-D-QFN24 because it retains the Cortex-M3 architecture, 32 MHz clock, 32 KB Flash, 4 KB RAM, and 24-QFN format. The manufacturer product identification notice associates the revised device with a drop-in replacement and addresses PORBOD behavior. Firmware, brownout thresholds, and board-level behavior should still be reviewed before production substitution.
Can EFM32TG108F32-D-QFN24 replace EFM32TG108F32-QFN24T?
Yes, EFM32TG108F32-D-QFN24 is identified as a drop-in replacement in the Silicon Labs EFM32TG Series revision notice. It retains the 24-QFN format and addresses revision-related errata involving PORBOD. Before substitution, confirm the exact ordering configuration, exposed-pad implementation, brownout behavior, and firmware assumptions against the manufacturer documentation.
What can replace EFM32TG108F32-QFN24T?
EFM32TG108F32-D-QFN24 is the primary replacement candidate for EFM32TG108F32-QFN24T because the manufacturer identifies it as a drop-in option for the revised EFM32TG Series device. EFM32TG110F16-QFN24T shares the 24-QFN format but has only 16 KB of Flash, so it is not an equivalent functional replacement without confirming firmware and memory requirements.
When should I choose EFM32TG108F32-QFN24T over EFM32TG110F16-QFN24T?
Choose EFM32TG108F32-QFN24T when the design requires 32 KB of Flash and 4 KB of RAM; EFM32TG110F16-QFN24T has 16 KB of Flash. Both use a 24-QFN format and reach 32 MHz, but the target device provides twice the Flash capacity of the TG110 part. The TG110 can suit smaller embedded programs, while the TG108 is safer for firmware growth, protocol tables, and application code.
Is EFM32TG108F32-QFN24T suitable for battery-powered IoT devices?
Yes, the EFM32TG108F32-QFN24T is suitable for battery-powered IoT devices because its low-power platform supports a Stop-mode current as low as 0.6 µA and fast wake-up behavior. Its 1.85 V to 3.8 V operating range also fits many low-voltage sensor and radio ecosystems. The final battery-life calculation should include radio transmission, sensor sampling, leakage, and wake-up frequency.
EFM32TG108F32-QFN24T vs EFM32ZG108F32-QFN24: which is better?
The EFM32TG108F32-QFN24T is the better match when firmware requires a 32 MHz ARM Cortex-M3 core and the original Tiny Gecko peripheral set; the EFM32ZG108F32-QFN24 uses a Cortex-M0+ core rated up to 24 MHz. Both are 24-QFN devices with 32 KB Flash according to their manufacturer-family descriptions, but core performance, peripheral behavior, software compatibility, and brownout implementation differ.

엔지니어링 참조 데이터: EFM32TG108F32-QFN24T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the EFM32TG108F32-QFN24T for a new low-power design requiring a 32 MHz Cortex-M3 core, 32 KB Flash, 4 KB RAM, 17 GPIO pins, and a compact 24-QFN footprint. Select EFM32TG108F32-D-QFN24 when the manufacturer revision and PORBOD behavior are required, since it is the closest revision-level replacement. EFM32TG110F16-QFN24T is appropriate only when 16 KB Flash is sufficient and the firmware comfortably fits that limit. Consider an HG or ZG 24-QFN candidate when a Cortex-M0+ core is acceptable, but verify peripheral behavior, software support, timing, and brownout configuration. The Tiny Gecko option is generally preferable when existing firmware targets Cortex-M3 and when the additional Flash capacity improves upgrade flexibility.

대체품과의 비교

파라미터 이 제품 EFM32TG108F32-D-QFN24 EFM32TG108F32-QFN24 EFM32TG110F16-QFN24T EFM32HG108F32G-C-QFN24 EFM32HG110F32G-A-QFN24
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (5x5) 24-QFN (5x5) - same 24-QFN (5x5) - same 24-QFN (5x5) - same 24-QFN - same 24-QFN - same
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M0+ ARM Cortex-M0+
Flash Memory 32 KB 32 KB 32 KB 16 KB 32 KB 32 KB

주요 차별점

  • Higher memory capacity than the TG110 option (vs EFM32TG110F16-QFN24T)
  • Manufacturer-identified revision-level drop-in path (vs EFM32TG108F32-D-QFN24)
  • Cortex-M3 performance over Cortex-M0+ options (vs EFM32ZG108F32-QFN24)

설계 노트

Build the power budget from the actual active duty cycle, not only the 150 µA/MHz Run-mode figure. Calculate sleeping current from the 0.6 µA Stop-mode value, then add sensor, radio, regulator, and leakage currents. Disable unused peripherals and avoid leaving the Cortex-M3 core active between events. Confirm that the power rail remains within 1.85 V to 3.8 V during wake-up and radio activity.

Place the required input and output decoupling capacitors close to the corresponding supply and ground pins, following the capacitor values and layout sequence in the Silicon Labs EFM32TG datasheet. Provide a low-impedance ground connection and thermal-via pattern for the exposed pad. Keep high-current or switching nodes away from sensitive signal routes and follow the package drawing for the exact 24-QFN land pattern.

Do not substitute EFM32TG110F16-QFN24T without reviewing firmware size because its 16 KB Flash is half the target device's 32 KB. Likewise, moving from Cortex-M3 to a Cortex-M0+ candidate can change startup behavior, peripheral implementation, and software dependencies. Confirm the complete pinout, brownout configuration, bootloader behavior, and exposed-pad connection before approving any alternate device.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Target-specific compliance declarations were not identified in the cited manufacturer product description or EFM32TG family datasheet.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

EFM32TG108F32-QFN24T datasheet EFM32TG108F32-QFN24T pinout EFM32TG108F32-QFN24T datasheet pdf EFM32TG108F32-QFN24T equivalent EFM32TG108F32-QFN24T replacement EFM32TG108F32-QFN24T cross reference EFM32TG108F32-QFN24T footprint EFM32TG108F32-QFN24T price EFM32TG108F32-QFN24T stock Silicon Labs EFM32TG108F32-QFN24T EFM32TG108F32-QFN24T vs EFM32TG110F16-QFN24T EFM32TG108F32-QFN24T battery powered IoT

관련 부품 & 용어

Silicon Labs EFM32TG108F32-QFN24T EFM32TG108F32-D-QFN24 EFM32TG110F16-QFN24T EFM32HG108F32G-C-QFN24 EFM32HG110F32G-A-QFN24 EFM32ZG108F32-QFN24 ARM Cortex-M3 ARM Cortex-M0+ Tiny Gecko microcontroller embedded processor 32-bit processor integrated circuit semiconductor 24-QFN QFN family surface-mount package low-power MCU energy-saving modes Stop mode 32 KB Flash 4 KB RAM 17 digital I/O pins IoT sensor node
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기