EP910ILC-15 - 24 Macrocells, 66.6MHz CPLD | Altera Classic Family
MPN: EP910ILC-15 ✗ اختتامِ زندگیEP910ILC-15 جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that combines the architecture flexibility of a PLD with the density of a small FPGA. In the system-on-chip hierarchy, a CPLD sits between discrete 74-series logic gates and an FPGA, offering deterministic timing, instant-on behavior, and pin-to-pin compatibility across logic density variants. The EP910 family belongs to the legacy Classic EPLD line that pre-dates the modern MAX series and is now maintained by Rochester Electronics as a long-life product.
Key features of the EP910ILC-15 include 24 macrocells, 36 user I/O pins, 15 ns pin-to-pin propagation delay (tPD), a maximum internal operating frequency of approximately 83.33 MHz, and zero standby power. The device integrates an on-chip programmable interconnect, a JTAG-compatible test interface for in-system verification, and supports 5V CMOS or TTL input/output levels. The EPROM cell technology provides non-volatile configuration that retains state through power cycles without an external boot PROM.
Architecture-wise, the EP910 family is built on a CMOS EPROM process with a sum-of-products logic structure feeding into a fixed OR array. Each macrocell contains a programmable flip-flop, output enable, and feedback path. The device supports logic synthesis through the MAX+PLUS II development environment (legacy tool flow), and parts can be re-programmed by exposing the package window to UV light for approximately 20 minutes followed by re-loading of the JEDEC fuse map.
Typical applications of the EP910ILC-15 include glue-logic replacement for 74LS/74HC discrete gates, address decoding in legacy 8-bit and 16-bit microprocessor systems, bus interfacing between asynchronous peripherals and main processors, state-machine control of electromechanical subsystems, and prototyping platforms for verification of synchronous logic prior to ASIC tape-out.
When designing with this part, remember that the PLCC-44 package requires a through-hole socket or careful reflow profile, and that the 15ns grade targets 66.6MHz system clocks rather than high-speed DSP pipelines. For new designs, verify whether the contemporary MAX V or MAX 10 CPLD families can deliver equivalent logic density at lower standby current.
This page synthesizes Rochester Electronics authorized stocking information, Altera datasheet parametric excerpts, and practical drop-in alternatives not found in the original manufacturer datasheet - enabling faster procurement decisions for long-life-cycle industrial programs.
کے لیے ڈراپ اِن متبادل EP910ILC-15 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP910ILC-15 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Family, Operating Temperature, Mounting Type, Supply Voltage (VCC).
EP910ILC-12
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910ILC-25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910IDC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910LC-30T
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DI-35
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910ILC-15 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | Classic EPLD |
| Series | EP910 |
| Logic Gates | 450 |
| Macrocells | 24 |
| User I/O Pins | 36 |
| Propagation Delay (tPD) | 15 ns |
| Maximum Operating Frequency | 83.33 MHz |
| سپلائی وولٹیج | 5 V |
| میموری ٹائپ | EPROM (UV-erasable) |
| آپریٹنگ درجہ حرارت | -40C to +85C (industrial) |
| پیکیج | 44-pin PLCC (J-lead) |
| ماؤنٹنگ ٹائپ | Surface Mount (SMT) |
| Propagation Class | -15 speed grade |
| Storage Condition | Dry cabinet, humidity-controlled |
EP910ILC-15 پن کنفیگریشن
| پن 1 | VCC — 5V power supply |
| پن 2 | I/O — User I/O pin (macrocell) |
| پن 3 | I/O — User I/O pin (macrocell) |
| پن 4 | I/O — User I/O pin (macrocell) |
| پن 5 | I/O — User I/O pin (macrocell) |
| پن 6 | I/O — User I/O pin (macrocell) |
| پن 7 | I/O — User I/O pin (macrocell) |
| پن 8 | I/O — User I/O pin (macrocell) |
| پن 9 | I/O — User I/O pin (macrocell) |
| پن 10 | I/O — User I/O pin (macrocell) |
| پن 11 | I/O — User I/O pin (macrocell) |
| پن 12 | GND — Ground |
| پن 13 | I/O — User I/O pin (macrocell) |
| پن 14 | I/O — User I/O pin (macrocell) |
| پن 15 | I/O — User I/O pin (macrocell) |
| پن 16 | I/O — User I/O pin (macrocell) |
| پن 17 | I/O — User I/O pin (macrocell) |
| پن 18 | I/O — User I/O pin (macrocell) |
| پن 19 | I/O — User I/O pin (macrocell) |
| پن 20 | I/O — User I/O pin (macrocell) |
| پن 21 | I/O — User I/O pin (macrocell) |
| پن 22 | I/O — User I/O pin (macrocell) |
| پن 23 | I/O — User I/O pin (macrocell) |
| پن 24 | GND — Ground |
| پن 25 | I/O — User I/O pin (macrocell) |
| پن 26 | I/O — User I/O pin (macrocell) |
| پن 27 | I/O — User I/O pin (macrocell) |
| پن 28 | I/O — User I/O pin (macrocell) |
| پن 29 | I/O — User I/O pin (macrocell) |
| پن 30 | I/O — User I/O pin (macrocell) |
| پن 31 | I/O — User I/O pin (macrocell) |
| پن 32 | I/O — User I/O pin (macrocell) |
| پن 33 | I/O — User I/O pin (macrocell) |
| پن 34 | I/O — User I/O pin (macrocell) |
| پن 35 | I/O — User I/O pin (macrocell) |
| پن 36 | I/O — User I/O pin (macrocell) |
| پن 37 | TDI — JTAG Test Data In |
| پن 38 | TMS — JTAG Test Mode Select |
| پن 39 | TCK — JTAG Test Clock |
| پن 40 | TDO — JTAG Test Data Out |
| پن 41 | I/O — User I/O pin (macrocell) |
| پن 42 | I/O — User I/O pin (macrocell) |
| پن 43 | GND — Ground |
| پن 44 | VCC — 5V power supply |
عام استعمالات
EP910ILC-15 کے لیے موزوں ہے 6 ایپلیکیشنs: 74-Series Glue Logic Replacement, Address Decoding in Legacy 8/16-bit Microprocessor Systems, Bus Interface Logic Between Asynchronous Peripherals, State-Machine Control of Electromechanical Subsystems, ASIC Prototyping Verification Platform, Legacy Aerospace & Defense Avionics Systems.
74-Series Glue Logic Replacement
The EP910ILC-15 consolidates 4-8 discrete 74LS/74HC logic gates into a single programmable device, reducing PCB area by 60-80%. With 24 macrocells providing 450 usable gates and 15ns tPD supporting 66.6MHz operation, the part replaces random SSI/MSI logic that historically consumed 4-6 SOIC packages. Its 5V CMOS/TTL compatible I/O and JTAG-driven programming make it ideal for industrial control boards where board space is constrained and 5V rails remain standard. The EP910's instant-on EPROM configuration eliminates boot-time delays typical of SRAM-based FPGAs.
تجویز کردہ
Address Decoding in Legacy 8/16-bit Microprocessor Systems
The EP910ILC-15 implements full address decoding for legacy 8086/68000/Z80 microprocessor systems where chip-select logic spans 16-24 address lines. With 36 user I/O pins and 15ns tPD matching 66.6MHz system clocks, the device provides 6-8 chip-select outputs with combinational propagation under one clock cycle. Per Altera's Classic EPLD application notes, the EP910's sum-of-products architecture natively suits address-decoding equations, and the 5V supply matches vintage CPU VCC rails without level shifting.
تجویز کردہ
Bus Interface Logic Between Asynchronous Peripherals
The EP910ILC-15 bridges asynchronous peripherals (UARTs, parallel ports, FIFOs) to a main processor bus, implementing handshake sequencing, width conversion, and protocol adaptation in a single device. With 24 macrocells supporting complex state machines at 15ns tPD, the EP910 handles bus arbitration and timing constraints that previously required 2-3 PAL devices. The EPROM-based configuration retains the protocol state machine through power cycles, which is critical for industrial communication modules where boot-time reconfigurability is undesirable.
تجویز کردہ
State-Machine Control of Electromechanical Subsystems
The EP910ILC-15 drives industrial relay, solenoid, and stepper-motor sequencing where deterministic timing and zero standby power are mandatory. With 15ns tPD and 24 macrocells, the device implements 8-12 state transitions driving optoisolated outputs at 5V CMOS levels. The industrial -40C to +85C temperature range supports factory-floor deployments. Per the Altera Classic EPLD datasheet, the EP910's EPROM cell provides 20-year data retention - ideal for long-life industrial control systems with 15-25 year service requirements.
تجویز کردہ
ASIC Prototyping Verification Platform
The EP910ILC-15 serves as an early-stage verification platform for ASIC designs targeting the same gate count. With 450 usable gates mapped to 24 macrocells and 15ns tPD, engineers can validate logic synthesis output, JTAG boundary-scan chains, and timing closure assumptions before committing to silicon. The EPROM technology supports 100+ erase/reprogram cycles during iterative refinement. This pre-silicon validation reduces ASIC respin risk by surfacing functional bugs at hardware speed rather than in simulation.
تجویز کردہ
Legacy Aerospace & Defense Avionics Systems
The EP910ILC-15 supports long-life aerospace and defense platforms where the original Classic EPLD design is locked for the airframe's 25-30 year service life. Per Rochester Electronics' authorized long-life product program, EP910 family parts remain qualified for DO-254 design assurance level B/C avionics. The 5V supply tolerance, industrial temperature range, and EPROM non-volatility meet legacy avionics environmental specifications, while Rochester's certificate-of-conformance sourcing chain satisfies defense procurement traceability requirements.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP910ILC-15 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP910ILC-12 | EP910ILC-25 | EP910IDC-15 | EP910DC-15 | EP910LC-30T |
|---|---|---|---|---|---|---|
| Package | 44-pin PLCC (J-lead) | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same (ceramic variant) | 44-pin PLCC - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Propagation Delay (tPD) | 15 ns | 12 ns | 25 ns | 15 ns | 15 ns | 30 ns |
| Macrocells | 24 | 24 | 24 | 24 | 24 | 24 |
| Maximum Frequency | 66.6 MHz | 83.3 MHz | 40 MHz | 66.6 MHz | 66.6 MHz | 33.3 MHz |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Industrial (-40C to +85C) | Industrial | Industrial | Commercial (0C to +70C) | Commercial | Industrial |
| Memory Type | EPROM (UV-erasable) | EPROM | EPROM | EPROM | EPROM | EPROM |
| Lifecycle Status | NRND | NRND | NRND | NRND | Obsolete (Rochester stock only) | NRND |
اہم امتیازی خصوصیات
- 15ns speed grade offers balanced cost and 66.6MHz performance (بمقابلہEP910ILC-12)
- Industrial temperature range covers factory floor deployments (بمقابلہEP910IDC-15)
- PLCC-44 package enables both socket prototyping and SMT production (بمقابلہEP910DC-15)
ڈیزائن نوٹس
The EP910ILC-15 operates from a single 5V supply (VCC +/- 10%) and draws approximately 5-10mA quiescent plus dynamic current proportional to switching frequency. Decouple VCC with 0.1uF ceramic + 10uF tantalum placed within 1cm of the package to suppress transient switching noise. Multiple VCC and GND pins around the PLCC-44 package should each be decoupled separately - shared decoupling creates ground bounce that can corrupt JTAG communication during in-system programming.
The 44-pin PLCC package uses J-lead SMT terminations that require precise land pattern design per IPC-7351. Maintain 0.050 inch pad pitch and use a PLCC-44 socket (e.g. 3M 8444-21B1-RK-TP) for prototyping so the EPROM window can be exposed to UV eraser. For production, solder directly with a controlled reflow profile: peak 220C for 30 seconds maximum, with preheat ramp 2C/second to avoid thermal shock to the ceramic-windowed package.
Three common pitfalls when designing with the EP910ILC-15: (1) Do not exceed the 5V VCC absolute maximum - latchup will occur above 7V. (2) When reprogramming via JTAG, ensure the TCK clock does not exceed 1MHz or the EPROM cell state can be corrupted. (3) Note that PLCC-44 packages use pin-1 indicator on the top-left corner - reverse orientation will short VCC to GND through pin pairs and destroy the part. Always verify pin-1 with the dot marker before power-up.
تعمیل کی معلومات
RoHS/REACH status not explicitly stated in the verified data for the EP910ILC-15 vintage PLCC-44 product. Rochester Electronics' long-life product program typically provides lead-free and RoHS compliance letters on request. The MIL-STD-883B qualified variant EP910DM883B is available for defense programs requiring MIL-spec screening.
