EP910ILC-15N - 450 Gate 24-Macrocell Classic CPLD, 15ns, 5V, 44-PLCC | Altera
MPN: EP910ILC-15N ✗ اختتامِ زندگیEP910ILC-15N جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that sits between simple SPLDs/GALs and higher-density FPGAs in the programmable logic hierarchy. CPLDs use a classic AND/OR plane architecture with a deterministic interconnect, EEPROM or EPROM configuration memory, and predictable timing that is independent of routing path. They are typically chosen over FPGAs when designs require fast input-to-output response, simple glue-logic integration, power-on instant-on behaviour without an external boot PROM, and I/O-rich, low-density logic capacity. The Classic family from Altera was an early-generation architecture that combined low static power with simple development tools such as the MAX+PLUS II environment.
Key features of the EP910ILC-15N include 24 macrocells partitioned into logic blocks, 36 user I/O pins, 16 dedicated input pins, JTAG-compliant IEEE 1149.1 boundary-scan test support, and programmable output slew-rate control. The 15 ns speed grade enables combinational logic at moderate clock rates suitable for bus-interface, address-decoding, and peripheral-control tasks.
Internally, the device uses a sum-of-products architecture with each macrocell containing a flip-flop and programmable output polarity. The 5 V CMOS I/O structure is TTL-compatible on inputs and capable of sinking 12 mA per output, allowing direct interface with 74-series logic, microprocessors, and SRAM without external buffers. The PLCC-44 package offers socketability for prototyping and field upgrades.
Typical applications include legacy ISA/PCI bus interface logic, address decoding and glue logic for 8051/Microprocessor systems, state-machine controllers, and peripheral bus arbiter replacement. The instant-on non-volatile configuration makes the EP910ILC-15N particularly attractive in industrial-control and military-aerospace designs where boot-time predictability is essential.
When designing with this part, observe the 5 V VCC tolerance and provide adequate decoupling (0.1 uF per supply pin plus a bulk 10 uF tantalum). For high-speed designs, respect the 15 ns tPD timing budget and use the JTAG port for in-system programming.
This page synthesises distributor pricing from Rochester Electronics and other sources, drop-in alternative MPNs, and practical design notes not consolidated in the original manufacturer datasheet.
کے لیے ڈراپ اِن متبادل EP910ILC-15N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP910ILC-15N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type, Operating Temperature, Family, Product Type.
EP910ILC-12
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910ILC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-15
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DM/883B
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910ILC-20
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EP610ILC-10
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910ILC-15N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | Classic |
| Product Type | CPLD (Complex Programmable Logic Device) |
| Logic Gates | 450 |
| Macro Cells | 24 |
| Maximum Propagation Delay (tPD) | 15 ns |
| Maximum Operating Frequency | 66.6 MHz |
| Supply Voltage (VCC) | 4.75 V to 5.25 V (5 V nominal) |
| User I/O Pins | 36 |
| Dedicated Input Pins | 16 |
| پیکیج | PLCC-44 (J-lead, surface mount) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | 0 C to +70 C (commercial) |
| Process Technology | CMOS EPROM (one-time programmable) |
| JTAG Support | IEEE 1149.1 boundary-scan |
| RoHS اسٹیٹس | Compliant |
| Programming | EPROM / JTAG (Classic EP-series) |
EP910ILC-15N پن کنفیگریشن
| پن 1 | I/O — Bidirectional user I/O pin (Macrocell block) |
| پن 2 | I/O — Bidirectional user I/O pin |
| پن 3 | I/O — Bidirectional user I/O pin |
| پن 4 | I/O — Bidirectional user I/O pin |
| پن 5 | I/O — Bidirectional user I/O pin |
| پن 6 | I/O — Bidirectional user I/O pin |
| پن 7 | I/O — Bidirectional user I/O pin |
| پن 8 | I/O — Bidirectional user I/O pin |
| پن 9 | GND — Ground |
| پن 10 | I/O — Bidirectional user I/O pin |
| پن 11 | I/O — Bidirectional user I/O pin |
| پن 12 | I/O — Bidirectional user I/O pin |
| پن 13 | I/O — Bidirectional user I/O pin |
| پن 14 | I/O — Bidirectional user I/O pin |
| پن 15 | I/O — Bidirectional user I/O pin |
| پن 16 | I/O — Bidirectional user I/O pin |
| پن 17 | I/O — Bidirectional user I/O pin |
| پن 18 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 19 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 20 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 21 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 22 | GND — Ground |
| پن 23 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 24 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 25 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 26 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 27 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 28 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 29 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 30 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 31 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 32 | I/O — Bidirectional user I/O pin (dedicated input capable) |
| پن 33 | GND — Ground |
| پن 34 | I/O — Bidirectional user I/O pin |
| پن 35 | I/O — Bidirectional user I/O pin |
| پن 36 | I/O — Bidirectional user I/O pin |
| پن 37 | I/O — Bidirectional user I/O pin |
| پن 38 | I/O — Bidirectional user I/O pin |
| پن 39 | I/O — Bidirectional user I/O pin |
| پن 40 | I/O — Bidirectional user I/O pin |
| پن 41 | I/O — Bidirectional user I/O pin |
| پن 42 | I/O — Bidirectional user I/O pin |
| پن 43 | TDI — JTAG Test Data In |
| پن 44 | VCC — +5 V supply |
عام استعمالات
EP910ILC-15N کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy ISA Bus Address Decoding, 8051 Microprocessor Peripheral Glue Logic, Industrial Control State Machine, Peripheral Bus Arbiter / Controller, Military / Aerospace Avionics (via MIL-STD-883 grade), Retro Computing Replica Boards.
Legacy ISA Bus Address Decoding
The EP910ILC-15N's 15 ns tPD and 36 user I/O pins make it well suited for legacy ISA-bus address decoding in industrial motherboards and retro-computing hardware. Its 5 V TTL-compatible I/O interfaces directly to 74LS245 buffers and the ISA bus without external level shifting, while 24 macrocells provide sufficient capacity for full 24-bit address decode and chip-select logic. The instant-on non-volatile configuration eliminates the boot-time delay of SRAM-based FPGAs, ensuring that address and chip-select signals are valid at power-on - critical for legacy peripherals that expect deterministic power-on behaviour.
تجویز کردہ
8051 Microprocessor Peripheral Glue Logic
The EP910ILC-15N integrates the address latching, chip-select decoding, and I/O expansion typically required around an 8-bit 8051 family processor. With 24 macrocells it can replace 4-6 discrete 74HC/74LS PALs, freeing PCB real-estate and reducing the BOM. The 15 ns tPD easily satisfies the 8051's 12 MHz ALE-to-valid timing, and the 5 V single-supply design matches the 8051's VCC rail directly. JTAG boundary-scan support assists bed-of-nails in-circuit test, lowering manufacturing test cost for medium-volume embedded products.
تجویز کردہ
Industrial Control State Machine
The EP910ILC-15N's deterministic 15 ns timing and EPROM-based non-volatile configuration make it ideal for hard-real-time industrial-control state machines where predictable response is more important than raw gate count. Applications include conveyor sortation logic, packaging-machine sequencers, and CNC auxiliary controllers. The 5 V tolerance and 0-70 C commercial temperature range suit panel-mount enclosed cabinets, while the PLCC-44 package supports socketed replacement in fielded equipment without desoldering. JTAG allows in-system reprogramming during factory commissioning.
تجویز کردہ
Peripheral Bus Arbiter / Controller
The EP910ILC-15N provides centralised bus arbitration and peripheral control in multi-master systems. With 24 macrocells, the device can implement a multi-port arbiter, interrupt controller, and timing-generator in a single chip, replacing dozens of 74LS-series TTL parts. The 5 V TTL-compatible I/O directly interfaces with DMA controllers, SCSI adapters, and other legacy peripherals. The 15 ns tPD comfortably arbitrates within standard ISA / VMEbus cycle times, while the non-volatile EPROM configuration means the arbiter is operational at the first clock edge after power-up.
تجویز کردہ
Military / Aerospace Avionics (via MIL-STD-883 grade)
While the EP910ILC-15N itself is a commercial-grade part, the same EP910 die is offered in MIL-STD-883B processing (EP910DM/883B) in the same PLCC-44 footprint, with a -55 C to +125 C operating range. This makes the Altera Classic EP910 family a long-standing choice for legacy avionics, weapon-system test equipment, and space-grade subsystems where instant-on non-volatile logic and a MIL-PRF-38535 pedigree are required. System designers standardise on the EP910 footprint to allow seamless substitution between commercial prototypes and flight-qualified hardware.
تجویز کردہ
Retro Computing Replica Boards
The EP910ILC-15N is popular among retro-computing hobbyists restoring 1980s-era arcade boards, vintage PCs, and classic gaming consoles such as the Commodore 64 cartridge expansions and early arcade logic boards. Its 5 V supply matches original-system rails, and its socketable PLCC-44 package lets hobbyists swap and reprogram (via OTP) replacement parts easily. The 15 ns tPD meets the timing budgets of 4-8 MHz original-era bus architectures. Reproducing the original Altera Classic design in FPGA is impractical for authenticity, so genuine EP910 parts are in continuous small-volume demand.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP910ILC-15N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP910ILC-12 | EP910ILC-15 | EP910DC-15 | EP910DM/883B | EP910ILC-20 | EP610ILC-10 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PLCC-44 | PLCC-44 - same | PLCC-44 - same | PLCC-44 - same | PLCC-44 - same | PLCC-44 - same | PLCC-44 - same |
| Logic Gates | 450 | 450 | 450 | 450 | 450 | 450 | 300 |
| Macro Cells | 24 | 24 | 24 | 24 | 24 | 24 | 16 |
| Propagation Delay (tPD) | 15 ns | 12 ns (faster) | 15 ns (identical) | 15 ns (identical) | 15 ns (identical) | 20 ns (slower) | 10 ns (faster) |
| Max Frequency (fMAX) | 66.6 MHz | 83.3 MHz | 66.6 MHz | 66.6 MHz | 66.6 MHz | 50 MHz | 100 MHz |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | 0 C to +70 C (commercial) | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | -55 C to +125 C (military) | 0 C to +70 C | 0 C to +70 C |
| Programming Technology | EPROM (OTP) | EPROM (OTP) | EPROM (OTP) | EPROM (OTP) | EPROM (OTP) | EPROM (OTP) | EPROM (OTP) |
اہم امتیازی خصوصیات
- Broader operating-temperature availability via MIL-STD-883B variant (بمقابلہEP910ILC-15N (commercial) vs EP910DM/883B (military))
- Faster -12 speed grade available in identical footprint (بمقابلہEP910ILC-15N vs EP910ILC-12)
- Instant-on non-volatile configuration vs SRAM-based FPGAs (بمقابلہEP910ILC-15N vs typical SRAM FPGA)
ڈیزائن نوٹس
Estimated: At 5 V VCC and typical ICC of approximately 100 mA (idle) to 150 mA (active), total power dissipation is 0.5-0.75 W per device. Place one 0.1 uF ceramic decoupling capacitor at each VCC pin (pin 44) plus one bulk 10 uF tantalum near the package. For multi-CPLD designs, add a ferrite bead on the supply rail to suppress switching-current-induced noise coupling into adjacent analog sections.
Route JTAG signals TDI/TDO/TMS/TCK as a four-wire bus with 10 kohm pull-ups on TMS and TCK. Keep the JTAG chain under 6 inches total length to avoid signal-integrity issues. Use a 44-pin PLCC socket (e.g. 3M 8444-21B1-RK-TB or Aries 44-3554-10) for prototype builds to simplify EPROM-OTP replacement during design iteration. Reserve PCB area for the JTAG header (2x5 0.1 inch pin-header) at board edge for programming access.
Do not confuse the EP910 family (one-time-programmable EPROM, 5 V VPP) with the EPM910 or EPM3060 family (in-system-programmable EEPROM). Programming voltage and algorithm differ. For designs that require field upgradeability, choose EPM-series MAX CPLDs instead. Verify in MAX+PLUS II that the target device is selected as EP910 (not EPM910) before generating the .POF file to avoid programming-voltage mismatch and permanent device damage.
For high-speed designs using the 15 ns speed grade, place the EP910ILC-15N within 2 inches of its companion bus devices to minimise stub-length-induced reflections. Use a continuous ground plane under the PLCC-44 socket; avoid signal traces under the socket cavity. Pin 1 identification: pin 1 is located at the top-left of the package with the chamfered edge down, matching standard PLCC JEDEC MS-018 pin numbering.
تعمیل کی معلومات
RoHS compliance per GlobalSpec datasheet summary. Lead-free finish on -N suffix variant. AEC-Q100 is not applicable (commercial/industrial logic device, not automotive-qualified). Military-grade MIL-STD-883B variant (EP910DM/883B) is available for defence applications in the same PLCC-44 footprint.
