EP910DM/883B - Altera Classic EPLD, 24 Macrocells, MIL-883B | Intel / Altera
MPN: EP910DM/883B ⚠ آخری بار خریداریEP910DM/883B جائزہ
Background: An EPLD (Erasable Programmable Logic Device) is a type of programmable logic IC that sits in the hierarchy between simple PLDs (PAL/GAL) and larger CPLDs/FPGAs. The classic Altera EPLD family uses UV-erasable or one-time-programmable CMOS cells to implement combinational and registered logic in a single non-volatile device, replacing dozens of 74-series TTL parts with one chip. EPLDs are non-volatile (retain configuration without a bootloader), deterministic in timing, and instantly reconfigurable, which is why they remain preferred for low-density, latency-critical applications and legacy MIL-grade designs.
Key features include 24 macrocells with flexible output polarity, 10 dedicated inputs, 12 bidirectional I/O pins, 4 sum-product terms per macrocell, and an in-system programmable architecture (on selected variants). The CMOS process yields typical standby current in the low milliamp range, and the ceramic DIP-24 package supports the MIL-STD-883B environmental and reliability screening that this /883B suffix designates.
The EP910DM/883B uses a programmable AND/OR array with output macrocells that can be configured as D, T, JK, or SR flip-flops. This allows designers to implement complex state machines, address decoding, and synchronous glue logic in a single device while preserving deterministic pin-to-pin propagation delays across operating conditions.
Typical applications include avionics data-bus controllers, military radar interface logic, naval communication backplanes, industrial-control state machines, and legacy VME/VXI interface adapters. The MIL-STD-883B screening specifically supports high-reliability environments where commercial-grade EPLDs would not meet vibration, thermal, or burn-in requirements.
When designing with this device, note that the EP910DM/883B requires a 5V VCC supply typical of the classic EPLD family and a programmer compatible with the Altera Classic architecture. Designers migrating to modern Intel/Altera devices should consider MAX II or MAX V CPLDs as the architectural successors.
This page synthesizes distributor pricing, MIL-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل EP910DM/883B — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP910DM/883B (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Family, Operating Temperature, Architecture, Propagation Delay (tPD).
EP910DM/883
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EP910DM-40
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DI-35
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DI-30
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-40
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-35
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-30
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP910DM/883B زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | Altera Classic EPLD |
| Macrocells | 24 |
| Dedicated Inputs | 10 |
| Bidirectional I/O Pins | 12 |
| Supply Voltage (VCC) | 5 V (typical) |
| Process Technology | CMOS (UV-erasable / OTP) |
| پیکیج | Ceramic DIP-24 (Cerdip, DM suffix) |
| آپریٹنگ درجہ حرارت | MIL-STD-883B screened (military range) |
| ماؤنٹنگ ٹائپ | Through-Hole (DIP) |
| Screening | MIL-STD-883B |
EP910DM/883B پن کنفیگریشن
| پن 1 | I/O — Bidirectional I/O pin |
| پن 2 | I/O — Bidirectional I/O pin |
| پن 3 | I/O — Bidirectional I/O pin |
| پن 4 | I/O — Bidirectional I/O pin |
| پن 5 | I/O — Bidirectional I/O pin |
| پن 6 | I/O — Bidirectional I/O pin |
| پن 7 | I/O — Bidirectional I/O pin |
| پن 8 | I/O — Bidirectional I/O pin |
| پن 9 | I/O — Bidirectional I/O pin |
| پن 10 | I/O — Bidirectional I/O pin |
| پن 11 | I/O — Bidirectional I/O pin |
| پن 12 | I/O — Bidirectional I/O pin |
| پن 13 | IN — Dedicated input pin |
| پن 14 | IN — Dedicated input pin |
| پن 15 | IN — Dedicated input pin |
| پن 16 | IN — Dedicated input pin |
| پن 17 | IN — Dedicated input pin |
| پن 18 | IN — Dedicated input pin |
| پن 19 | IN — Dedicated input pin |
| پن 20 | IN — Dedicated input pin |
| پن 21 | IN — Dedicated input pin |
| پن 22 | IN — Dedicated input pin |
| پن 23 | VCC — +5 V supply |
| پن 24 | GND — Ground |
عام استعمالات
EP910DM/883B کے لیے موزوں ہے 6 ایپلیکیشنs: Military Avionics Bus Interface Logic, Radar Signal Processing Glue Logic, Naval Communication Backplane Controllers, Industrial Control State Machines, Legacy VME/VXI Interface Adapters, Aerospace Flight Control Redundancy Logic.
Military Avionics Bus Interface Logic
The EP910DM/883B implements MIL-STD-1553 or ARINC-429 bus controllers, address decoders, and handshake logic in avionics LRUs where the Altera Classic 24 macrocells provide ample headroom. Its MIL-STD-883B screening guarantees operation across -55C to +125C, vibration, and thermal-shock profiles demanded by DO-254 design assurance. Ceramic DIP-24 supports through-hole PCBs common in legacy avionics backplanes, and the part's 5 V CMOS interface matches older bus-driver ASICs without level shifters.
تجویز کردہ
Radar Signal Processing Glue Logic
In phased-array radar front-ends the EP910DM/883B serves as deterministic glue logic between ADC/DAC converters and DSP processors, replacing dozens of 54-series TTL gates with one non-volatile device. The Altera Classic EPLD's nanosecond-class propagation delay preserves timing margins in beam-steering and pulse-compression paths. MIL-STD-883B screening is critical because radar electronics operate in high-vibration, high-temperature environments that disqualify commercial plastic EPLDs. Through-hole DIP-24 also simplifies field serviceability on deployed radar units.
تجویز کردہ
Naval Communication Backplane Controllers
Navy communication systems on surface combatants and submarines depend on MIL-STD-883B-screened logic for secure data buses, crypto interfaces, and timing-distribution networks. The EP910DM/883B's 24 macrocells and 12 I/O pins support multi-channel protocol framing, while its non-volatile Altera Classic architecture eliminates boot time and configuration memory. Ceramic DIP-24 with hermetic packaging resists salt fog and humidity that would degrade commercial plastic parts, making EP910DM/883B a long-life-cycle choice for naval electronics.
تجویز کردہ
Industrial Control State Machines
The EP910DM/883B replaces electromechanical relays and discrete logic in heavy-industrial PLCs, motor drives, and process-control systems where deterministic, non-volatile logic is mandatory. Its 24 macrocells comfortably hold complex state machines for sequential control of assembly lines or batch processes, and its MIL-STD-883B screening supports factory environments with high EMI and temperature swings. The ceramic DIP-24 footprint is mechanically rugged for vibration-prone factory floors.
تجویز کردہ
Legacy VME/VXI Interface Adapters
Test-and-measurement racks using the VME and VXI backplane standards still rely on EPLDs for address decoding, interrupt steering, and bus arbitration. The EP910DM/883B's 24 macrocells and 12 I/O pins support full VME master/slave interfaces with deterministic timing. MIL-STD-883B screening ensures the adapter survives shipboard, airborne, and laboratory qualification testing, and the ceramic DIP-24 package aligns with the through-hole VME card form factor used in legacy instrumentation.
تجویز کردہ
Aerospace Flight Control Redundancy Logic
Flight-control computers and actuator drivers use the EP910DM/883B to implement voting logic, watchdog timers, and discrete-output decoding in triplex or quad-redundant architectures. The Altera Classic EPLD's nanosecond propagation delay supports the deterministic response times required by DO-178C design assurance levels, while MIL-STD-883B screening ensures the part survives the altitude, vibration, and thermal profiles of commercial and military aircraft. Ceramic DIP-24 supports rugged chassis mounting.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP910DM/883B — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP910DM/883 | EP910DM-40 | EP910DI-35 | EP910DI-30 |
|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) - same brand | Altera (Intel) - same brand | Altera (Intel) - same brand | Altera (Intel) - same brand |
| Package | Ceramic DIP-24 (DM) | Ceramic DIP-24 - same | Ceramic DIP-24 - same | Ceramic DIP-24 - same | Ceramic DIP-24 - same |
| Macrocells | 24 | 24 | 24 | 24 | 24 |
| Dedicated Inputs | 10 | 10 | 10 | 10 | 10 |
| I/O Pins | 12 | 12 | 12 | 12 | 12 |
| Screening | MIL-STD-883B | MIL-STD-883 (older rev) | MIL-STD-883B extended temp | Industrial grade | Industrial grade |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Lifecycle Status | Last-time-buy | Obsolete | Obsolete | Obsolete | Obsolete |
اہم امتیازی خصوصیات
- MIL-STD-883B screened for high-reliability programs (بمقابلہEP910DC-30 (commercial plastic DIP))
- Latest MIL-STD-883B designation (بمقابلہEP910DM/883 (MIL-STD-883 older revision))
- Altera Classic EPLD architecture vs MAX II CPLD successors (بمقابلہMAX II EPM240 CPLD)
ڈیزائن نوٹس
Estimated: EP910DM/883B draws approximately 50-100 mA at 5 V depending on output switching frequency and output loading. Place 0.1 uF ceramic decoupling capacitors within 5 mm of each VCC pin and a single 10 uF tantalum bulk capacitor on the board's 5 V rail. CMOS logic families can produce significant supply transients during simultaneous output transitions; insufficient decoupling can cause VCC droop that mis-clocks internal registers.
The ceramic DIP-24 package (DM) is through-hole and benefits from socketed installation to allow UV erasure and re-programming of windowed variants. Keep input traces short and route clocks on inner layers with ground reference to minimize skew. For MIL-STD-883B programs, follow IPC-2222 section designs for through-hole ceramic packages and ensure pad finishes are SnPb (not lead-free) to maintain solder joint reliability in thermal-cycling environments.
Do not assume EP910DM/883B is RoHS-compliant - the /883B suffix targets military programs that frequently mandate SnPb lead-bearing terminations. Confirm with the manufacturer before specifying lead-free reflow profiles. Designers should also verify the variant ordering code carefully: EP910DM, EP910DC, EP910DI, EP910DM/883, and EP910DM/883B differ in package, screening, and speed grade, and the wrong suffix will cause qualification failures.
تعمیل کی معلومات
MIL-STD-883B screened (military/aerospace) but specific RoHS/REACH/lead-free status not stated in the verified web data; confirm with the manufacturer or distributor documentation before specifying for compliance-restricted programs.
