Intel

EPF10K130EQC240-1N - 130K Gates FLEX 10KE FPGA, 240-PQFP | Intel

MPN: EPF10K130EQC240-1N ✗ اختتامِ زندگی

2.375 V to 2.625 V (2.5 V nominal) Vdss 240-BFQFP / 240-PQFP, 32 × 32 mm Package 333.33 MHz Speed 64 Kbit (4 × EAB, 2,048 bits each) Memory

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

EPF10K130EQC240-1N جائزہ

The Intel (formerly Altera) EPF10K130EQC240-1N is a FLEX 10KE family Field-Programmable Gate Array (FPGA) integrating 130,000 system gates with 6,656 logic elements and 65,536 bits of embedded SRAM, fabricated on a 0.22 µm (some sources cite 0.25 µm) CMOS process and housed in a 240-pin Plastic Quad Flat Pack (PQFP / 240-BFQFP) measuring 32x32 mm. The device operates from a 2.375 V to 2.625 V (2.5 V nominal) core supply, supports 186 user I/Os, and contains 832 Logic Array Blocks (LABs) implementing a built-in SRAM configuration memory so the bitstream reloads on every power-up.

A Field-Programmable Gate Array is a reconfigurable digital integrated circuit that combines programmable logic elements, an interconnect matrix, and I/O blocks in a single die. Within the broader programmable-logic taxonomy, FPGAs sit above small CPLDs and below ASICs in density; the FLEX 10KE family in particular targets glue-logic, bus-bridging, and mid-density state-machine designs of the late 1990s/early 2000s, before the Cyclone and Stratix families displaced FLEX 10KE in new designs. Engineers chose the FLEX 10KE family for SRAM-based reconfigurability, embedded memory blocks, and the mature Quartus II design-flow support.

Key specifications include 64 Kbit embedded block RAM (EAB), 342,000 maximum system gates, 4 Embedded Array Blocks (EABs) of 2,048 bits each, 333.33 MHz maximum internal operating frequency, and -40 °C to +85 °C commercial operating temperature range (note the -1N speed grade). The -1N suffix designates the faster -1 speed grade combined with an industrial/lead-free reflow profile; the package is lead-free (Pb-free) and RoHS compliant, while older -1 / -2 / -3 grades used SnPb lead finish. Compared with the -3 (slowest) grade, the -1 grade delivers the highest internal performance in this family.

Typical applications include telecom interface cards (T1/E1, Utopia, POS-PHY bridging), industrial control boards, mid-density glue logic between microprocessors and peripherals, ISA/PCI bus bridges, and legacy replacement of 74-series TTL arrays in long-lifecycle equipment. The 186 user I/Os and 64 Kbit of embedded RAM also make it suitable for protocol converters and small packet-processing engines on FPGA fabric.

When designing with this part, ensure the 2.5 V core rail is well decoupled with 0.1 µF and 10 µF capacitors near each supply pin, and route all 186 I/Os through 5 V-tolerant banks if the board mixes 3.3 V and 5 V logic. Quartus II (legacy) or the Quartus Prime FLEX 10KE device-support add-on is required for synthesis, fitting, and bitstream generation.

This page combines distributor pricing, SameFrame pin-migration alternatives, and practical design guidance not found in the original FLEX 10KE datasheet, helping engineers evaluating EOL inventory or performing legacy board-maintenance sourcing.

کے لیے ڈراپ اِن متبادل EPF10K130EQC240-1N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPF10K130EQC240-1N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Total RAM Bits, Package, Mounting Type, Configuration Method.

EPF10K100EQC240-1N

Intel

Operating Temperature: 0 °C to 70 °C (commercial)

Mounting Type: Surface Mount