Intel

EPF10K130EQI240-1N - 130K Gates FLEX 10KE FPGA, 240-PQFP | Intel / Altera

MPN: EPF10K130EQI240-1N ✗ اختتامِ زندگی

2.5 V nominal (2.3 V to 2.7 V) Vdss LVTTL, LVCMOS, PCI, SSTL (multi-voltage) Rds(on) 240-pin PQFP (RQFP-240), gull-wing, surface mount Package

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

EPF10K130EQI240-1N جائزہ

The Intel (formerly Altera) EPF10K130EQI240-1N is a high-density FLEX 10KE family FPGA delivering 130,000 typical gates (logic, capacity, package) housed in a 240-pin PowerQuad Flat Pack (PQFP, RQFP-240) surface-mount package with gull-wing leads. It provides 6,656 logic elements, embedded array blocks (EABs), and 186 user I/O pins, with a 2.5 V core supply (2.3 V to 2.7 V tolerance) suitable for industrial-temperature designs.

An FPGA (Field-Programmable Gate Array) is a programmable logic device from the broader category of programmable logic devices (PLDs) within the integrated circuits hierarchy. FPGAs occupy the high-end of the PLD taxonomy (above simple SPLDs and CPLDs) by integrating thousands of configurable logic blocks, programmable interconnect, embedded memory, and often embedded multipliers or transceivers, enabling the implementation of complete digital subsystems on a single chip. The FLEX 10KE generation is built on a 0.25 µm CMOS process with SRAM-based configuration, requiring an external configuration device such as the EPC2 configuration PROM to load the bitstream at power-up.

Key features include 6,656 logic elements (LEs), 6,912 total RAM bits distributed across embedded array blocks, support for system-clock rates up to 333.33 MHz, and a JTAG-compliant IEEE 1149.1 boundary-scan test interface. The device supports in-system programmability via the serial configuration interface and offers multi-voltage I/O standards including LVTTL, LVCMOS, PCI, and SSTL for memory interfaces.

Typical applications include industrial control, telecom line cards, glue-logic consolidation on legacy 5 V boards, prototyping for ASIC replacement, and DSP co-processing pipelines. The wide I/O count and embedded memory blocks also make the part well-suited to parallel bus interfacing in test and measurement instrumentation.

Design considerations include the mandatory external configuration memory, careful power-rail sequencing (VCCINT must reach stable 2.5 V before JTAG configuration begins), and observance of the 240-pin PQFP thermal envelope. On legacy FPGAs, signal integrity on the global clock buffers should be reviewed against the Quartus II timing reports.

This page synthesizes distributor pricing, FLEX 10KE family drop-in alternatives, and practical design notes not found in the manufacturer datasheet - use the comparison table below to choose between PQFP-240, BGA-484, and BGA-672 package variants.

کے لیے ڈراپ اِن متبادل EPF10K130EQI240-1N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPF10K130EQI240-1N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Mounting Type, Total RAM Bits, Operating Temperature, Family, Package.

EPF10K130EQC240-1

Altera

Mounting Type: Surface Mount (Gull-wing)

Total RAM Bits: 65,536

Operating Temperature: 0 C to +70 C (Commercial)