ICS502MIT - 140MHz PLL Clock Generator | Renesas | SOIC-8
MPN: ICS502MIT ✓ فعالICS502MIT جائزہ
A PLL clock multiplier is an integrated timing circuit that compares a reference signal with a divided version of its internally generated output, then adjusts the output until the two signals are phase and frequency aligned. In the product hierarchy, the ICS502MIT is a clock generator, a frequency synthesizer, and ultimately an integrated timing IC. Its LOCO architecture is intended to multiply a low-frequency reference into higher-frequency clock and reference outputs using fewer external components than traditional discrete frequency-generation approaches.
The main specifications identify the ICS502MIT as a one-circuit PLL clock generator with crystal or clock input, CMOS output, and no differential input or output. The maximum supported frequency is 140 MHz. The documented input-to-output ratio for the MIT variant is listed as 2:2. The SOIC-8 package supports surface-mount assembly and provides a compact solution for industrial, communications, networking, test, and measurement equipment.
Clock-generating ICs are useful when one low-frequency reference must be converted into a higher-frequency timing signal with predictable phase behavior. The ICS502MIT can serve as the central timing element in a clock tree or as a local clock source for digital logic, processors, interface circuits, and mixed-signal systems. Because its output is CMOS, downstream devices must be evaluated for input-voltage compatibility, rise and fall time requirements, fanout, and termination needs.
Typical clock-generation applications include communications equipment, frequency conversion, digital control systems, instrumentation, and general-purpose timing subsystems. A crystal-connected implementation is appropriate when the board needs a stable frequency reference, while a clock-input implementation can support an existing system clock. In either topology, output loading, trace length, grounding, and decoupling remain critical because clock edges must reach downstream devices within their timing specifications.
Design with the external crystal or reference network, supply decoupling, and output termination specified by the manufacturer datasheet. Confirm the selected reference frequency, multiplication ratio, and resulting maximum output frequency before layout. If an existing board must be changed, compare every pin, power rail, output type, and timing parameter against the original device rather than assuming that a similarly described clock generator is interchangeable.
This product page consolidates the verified ICS502MIT device identity, frequency, PLL, I/O, package, and sourcing details with practical clock-tree guidance. It also distinguishes documented device characteristics from parameters that must be confirmed in the manufacturer datasheet before qualification or production release.
کے لیے ڈراپ اِن متبادل ICS502MIT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںICS502MIT تفصیلات
| Product Type | Clock Generator IC |
| Architecture | LOCO PLL clock multiplier |
| Maximum Frequency | 140 MHz |
| Number of Circuits | 1 circuit |
| Input Type | Clock or crystal |
| آؤٹ پٹ کی قسم | CMOS |
| Input-to-Output Ratio | 2:2 |
| Differential Input | No |
| Differential Output | No |
| PLL | Yes |
| پیکیج | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| ماؤنٹنگ ٹائپ | Surface mount |
| Manufacturer | Renesas Electronics Corporation |
ICS502MIT 8-pin soic, 0.154 inch (3.90 mm) width پن کنفیگریشن گائیڈ
ICS502MIT (8-pin soic, 0.154 inch (3.90 mm) width پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS502MIT.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ICS502MIT کے لیے موزوں ہے 6 ایپلیکیشنs: Communications Clock Tree, Industrial Control Timing, Test and Measurement Instrumentation, Digital Logic Clock Distribution, Frequency Conversion Subsystem, Network Interface Timing.
Communications Clock Tree
The ICS502MIT fits a local clock-tree node that requires a single-ended CMOS timing signal derived from a lower-frequency crystal or system reference. Its PLL-based LOCO architecture can multiply the reference to a frequency as high as 140 MHz, allowing a communications board to distribute clocking to compatible digital logic without adding a larger clock-generator package. The 8-pin SOIC-8 footprint supports compact surface-mount layouts. Before implementation, confirm the reference frequency, required multiplication ratio, jitter budget, output loading, and downstream input thresholds against the manufacturer datasheet.
تجویز کردہ
Industrial Control Timing
ICS502MIT can provide a compact, multiplexed timing reference for an industrial controller when the system uses single-ended CMOS clocking and operates below the device's documented 140 MHz maximum frequency. The PLL approach is useful when a stable low-frequency crystal reference must drive logic requiring a higher-frequency clock. Its 8-pin SOIC-8 package and one-circuit architecture simplify board-area allocation. Designers must still verify supply voltage, temperature range, clock rise and fall time, fanout, isolation strategy, and conducted-emissions requirements in the final control platform.
تجویز کردہ
Test and Measurement Instrumentation
The ICS502MIT is suitable for timing blocks in test and measurement instruments that need a compact PLL-derived CMOS clock from a crystal or external reference. A single high-frequency output can support compatible counters, data converters, digital controllers, or interface circuits while reducing discrete frequency-multiplication components. The maximum documented frequency of 140 MHz provides a clear upper boundary for initial architecture selection. Instrument designs should evaluate output drive, reference jitter, spur content, grounding, and cable or trace loading because the clock quality ultimately determines the accuracy of downstream measurements.
تجویز کردہ
Digital Logic Clock Distribution
ICS502MIT can act as the local generator feeding a single-ended CMOS clock network for processors, programmable logic, memory interfaces, or other digital peripherals. The one-circuit PLL topology produces a higher-frequency output from a lower-frequency reference, while the SOIC-8 package keeps the implementation compact. The design must account for edge-rate degradation, capacitive loading, fanout limitations, and return-path continuity on the PCB. Use short clock routes where possible, preserve a continuous ground reference, and confirm that each receiver's minimum pulse-width and input-level requirements are satisfied.
تجویز کردہ
Frequency Conversion Subsystem
The ICS502MIT can be used in a frequency-conversion subsystem that requires a stable reference multiplied from a crystal or external clock into a higher-frequency CMOS signal. Its PLL-based clock-multiplier function is particularly relevant to boards that need local frequency generation without relying on a distant system clock. The verified 2:2 ratio for this variant should be checked against the intended system architecture rather than generalized across every ICS502 suffix. Engineers should also account for reference startup time, loop settling, output jitter, and startup behavior in sequential acquisition or communication systems.
تجویز کردہ
Network Interface Timing
ICS502MIT can support a network interface that needs a locally generated, single-ended CMOS reference clock. The 140 MHz maximum frequency makes it relevant to timing blocks operating below that ceiling, while the SOIC-8 package is convenient for compact interface cards. A design should ensure that the chosen reference and PLL configuration meet the interface controller's frequency tolerance, jitter, and duty-cycle requirements. PCB implementation must also separate the clock route from noisy switching stages, provide a solid ground plane, and account for connector or cable loading where the clock leaves the board.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ICS502MIT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
Do not treat an arbitrary 140 MHz clock generator as interchangeable. The correct candidate must also match the 8-pin SOIC-8 footprint, pin assignment, crystal or clock-input architecture, supply voltage, output drive, temperature range, and timing characteristics. For a replacement, request a validated cross-reference and compare every electrical and pin-level requirement. If the system requires differential clocks, adjustable ratios, multiple independent outputs, or a package other than SOIC-8, choose a device specifically designed for those requirements rather than forcing an unreviewed substitution.
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Package | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| Brand | Renesas Electronics |
| Product Type | Clock Generator IC |
| Architecture | LOCO PLL clock multiplier |
| Maximum Frequency | 140 MHz |
| Number of Circuits | 1 circuit |
| Input Type | Clock or crystal |
| Output Type | CMOS |
| Input-to-Output Ratio | 2:2 |
| Differential I/O | No differential input or output |
اہم امتیازی خصوصیات
- Compact single-circuit PLL clock generation (بمقابلہICS502)
- Defined 140 MHz operating class (بمقابلہICS502)
- Single-ended CMOS integration (بمقابلہICS502)
ڈیزائن نوٹس
Place the crystal or reference-clock source, its required passive network, and the ICS502MIT input pins close together to minimize sensitive-loop area and input pickup. Keep the clock output on a short, continuous route with a nearby ground reference. The SOIC-8 package supports compact placement, but minimizing loop area is especially important for a high-frequency PLL clock because trace inductance and capacitance can affect startup, edge quality, and timing margin.
Follow the manufacturer reference circuit for supply decoupling and connect the decoupling capacitor close to the device's supply and ground pins. Separate the clock-generator supply route from noisy switching nodes where practical. Verify the selected regulator can start and remain stable with the reference oscillator's operating current, and avoid routing clock edges across split or interrupted ground-plane boundaries.
Do not select a replacement solely by maximum frequency. A drop-in candidate must use the same 8-pin SOIC footprint and preserve the crystal or clock-input architecture, CMOS output, relevant 2:2 configuration, supply requirements, and timing characteristics. Also verify reference frequency, output drive, temperature grade, and package dimensions. A functionally similar PLL with different pin assignments can prevent startup, distort the output, or create unsafe shorts on an existing board.
Evaluate clock amplitude, rise and fall time, duty cycle, and loading at the actual receiver rather than relying only on nominal frequency. CMOS outputs can experience edge degradation when driving long traces or high capacitance. If the clock reaches a connector, cable, or long PCB route, consider buffering or matched termination according to the interface requirements, and keep the return path continuous to prevent additional jitter or timing uncertainty.
تعمیل کی معلومات
No compliance declarations were present in the verified device listings. Compliance status must be confirmed from the current manufacturer documentation or declaration before qualification.