ICS502MIT - 140MHz PLL Clock Generator | Renesas | SOIC-8
料号: ICS502MIT ✓ 量产中ICS502MIT 概述
A PLL clock multiplier is an integrated timing circuit that compares a reference signal with a divided version of its internally generated output, then adjusts the output until the two signals are phase and frequency aligned. In the product hierarchy, the ICS502MIT is a clock generator, a frequency synthesizer, and ultimately an integrated timing IC. Its LOCO architecture is intended to multiply a low-frequency reference into higher-frequency clock and reference outputs using fewer external components than traditional discrete frequency-generation approaches.
The main specifications identify the ICS502MIT as a one-circuit PLL clock generator with crystal or clock input, CMOS output, and no differential input or output. The maximum supported frequency is 140 MHz. The documented input-to-output ratio for the MIT variant is listed as 2:2. The SOIC-8 package supports surface-mount assembly and provides a compact solution for industrial, communications, networking, test, and measurement equipment.
Clock-generating ICs are useful when one low-frequency reference must be converted into a higher-frequency timing signal with predictable phase behavior. The ICS502MIT can serve as the central timing element in a clock tree or as a local clock source for digital logic, processors, interface circuits, and mixed-signal systems. Because its output is CMOS, downstream devices must be evaluated for input-voltage compatibility, rise and fall time requirements, fanout, and termination needs.
Typical clock-generation applications include communications equipment, frequency conversion, digital control systems, instrumentation, and general-purpose timing subsystems. A crystal-connected implementation is appropriate when the board needs a stable frequency reference, while a clock-input implementation can support an existing system clock. In either topology, output loading, trace length, grounding, and decoupling remain critical because clock edges must reach downstream devices within their timing specifications.
Design with the external crystal or reference network, supply decoupling, and output termination specified by the manufacturer datasheet. Confirm the selected reference frequency, multiplication ratio, and resulting maximum output frequency before layout. If an existing board must be changed, compare every pin, power rail, output type, and timing parameter against the original device rather than assuming that a similarly described clock generator is interchangeable.
This product page consolidates the verified ICS502MIT device identity, frequency, PLL, I/O, package, and sourcing details with practical clock-tree guidance. It also distinguishes documented device characteristics from parameters that must be confirmed in the manufacturer datasheet before qualification or production release.
直接替换替代料: ICS502MIT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料ICS502MIT 规格参数
| Product Type | Clock Generator IC |
| Architecture | LOCO PLL clock multiplier |
| Maximum Frequency | 140 MHz |
| Number of Circuits | 1 circuit |
| Input Type | Clock or crystal |
| 输出类型 | CMOS |
| Input-to-Output Ratio | 2:2 |
| Differential Input | No |
| Differential Output | No |
| PLL | Yes |
| 封装 | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| 安装类型 | Surface mount |
| Manufacturer | Renesas Electronics Corporation |
ICS502MIT 8-pin soic, 0.154 inch (3.90 mm) width 引脚配置指南
ICS502MIT(8-pin soic, 0.154 inch (3.90 mm) width 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ICS502MIT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ICS502MIT 适用于 6 应用s: Communications Clock Tree, Industrial Control Timing, Test and Measurement Instrumentation, Digital Logic Clock Distribution, Frequency Conversion Subsystem, Network Interface Timing.
Communications Clock Tree
The ICS502MIT fits a local clock-tree node that requires a single-ended CMOS timing signal derived from a lower-frequency crystal or system reference. Its PLL-based LOCO architecture can multiply the reference to a frequency as high as 140 MHz, allowing a communications board to distribute clocking to compatible digital logic without adding a larger clock-generator package. The 8-pin SOIC-8 footprint supports compact surface-mount layouts. Before implementation, confirm the reference frequency, required multiplication ratio, jitter budget, output loading, and downstream input thresholds against the manufacturer datasheet.
推荐
Industrial Control Timing
ICS502MIT can provide a compact, multiplexed timing reference for an industrial controller when the system uses single-ended CMOS clocking and operates below the device's documented 140 MHz maximum frequency. The PLL approach is useful when a stable low-frequency crystal reference must drive logic requiring a higher-frequency clock. Its 8-pin SOIC-8 package and one-circuit architecture simplify board-area allocation. Designers must still verify supply voltage, temperature range, clock rise and fall time, fanout, isolation strategy, and conducted-emissions requirements in the final control platform.
推荐
Test and Measurement Instrumentation
The ICS502MIT is suitable for timing blocks in test and measurement instruments that need a compact PLL-derived CMOS clock from a crystal or external reference. A single high-frequency output can support compatible counters, data converters, digital controllers, or interface circuits while reducing discrete frequency-multiplication components. The maximum documented frequency of 140 MHz provides a clear upper boundary for initial architecture selection. Instrument designs should evaluate output drive, reference jitter, spur content, grounding, and cable or trace loading because the clock quality ultimately determines the accuracy of downstream measurements.
推荐
Digital Logic Clock Distribution
ICS502MIT can act as the local generator feeding a single-ended CMOS clock network for processors, programmable logic, memory interfaces, or other digital peripherals. The one-circuit PLL topology produces a higher-frequency output from a lower-frequency reference, while the SOIC-8 package keeps the implementation compact. The design must account for edge-rate degradation, capacitive loading, fanout limitations, and return-path continuity on the PCB. Use short clock routes where possible, preserve a continuous ground reference, and confirm that each receiver's minimum pulse-width and input-level requirements are satisfied.
推荐
Frequency Conversion Subsystem
The ICS502MIT can be used in a frequency-conversion subsystem that requires a stable reference multiplied from a crystal or external clock into a higher-frequency CMOS signal. Its PLL-based clock-multiplier function is particularly relevant to boards that need local frequency generation without relying on a distant system clock. The verified 2:2 ratio for this variant should be checked against the intended system architecture rather than generalized across every ICS502 suffix. Engineers should also account for reference startup time, loop settling, output jitter, and startup behavior in sequential acquisition or communication systems.
推荐
Network Interface Timing
ICS502MIT can support a network interface that needs a locally generated, single-ended CMOS reference clock. The 140 MHz maximum frequency makes it relevant to timing blocks operating below that ceiling, while the SOIC-8 package is convenient for compact interface cards. A design should ensure that the chosen reference and PLL configuration meet the interface controller's frequency tolerance, jitter, and duty-cycle requirements. PCB implementation must also separate the clock route from noisy switching stages, provide a solid ground plane, and account for connector or cable loading where the clock leaves the board.
推荐
推荐产品汇总
工程参考数据: ICS502MIT ——对比、设计指导和合规信息。
选型指南
Do not treat an arbitrary 140 MHz clock generator as interchangeable. The correct candidate must also match the 8-pin SOIC-8 footprint, pin assignment, crystal or clock-input architecture, supply voltage, output drive, temperature range, and timing characteristics. For a replacement, request a validated cross-reference and compare every electrical and pin-level requirement. If the system requires differential clocks, adjustable ratios, multiple independent outputs, or a package other than SOIC-8, choose a device specifically designed for those requirements rather than forcing an unreviewed substitution.
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| Brand | Renesas Electronics |
| Product Type | Clock Generator IC |
| Architecture | LOCO PLL clock multiplier |
| Maximum Frequency | 140 MHz |
| Number of Circuits | 1 circuit |
| Input Type | Clock or crystal |
| Output Type | CMOS |
| Input-to-Output Ratio | 2:2 |
| Differential I/O | No differential input or output |
关键差异点
- Compact single-circuit PLL clock generation (对比 ICS502)
- Defined 140 MHz operating class (对比 ICS502)
- Single-ended CMOS integration (对比 ICS502)
设计说明
Place the crystal or reference-clock source, its required passive network, and the ICS502MIT input pins close together to minimize sensitive-loop area and input pickup. Keep the clock output on a short, continuous route with a nearby ground reference. The SOIC-8 package supports compact placement, but minimizing loop area is especially important for a high-frequency PLL clock because trace inductance and capacitance can affect startup, edge quality, and timing margin.
Follow the manufacturer reference circuit for supply decoupling and connect the decoupling capacitor close to the device's supply and ground pins. Separate the clock-generator supply route from noisy switching nodes where practical. Verify the selected regulator can start and remain stable with the reference oscillator's operating current, and avoid routing clock edges across split or interrupted ground-plane boundaries.
Do not select a replacement solely by maximum frequency. A drop-in candidate must use the same 8-pin SOIC footprint and preserve the crystal or clock-input architecture, CMOS output, relevant 2:2 configuration, supply requirements, and timing characteristics. Also verify reference frequency, output drive, temperature grade, and package dimensions. A functionally similar PLL with different pin assignments can prevent startup, distort the output, or create unsafe shorts on an existing board.
Evaluate clock amplitude, rise and fall time, duty cycle, and loading at the actual receiver rather than relying only on nominal frequency. CMOS outputs can experience edge degradation when driving long traces or high capacitance. If the clock reaches a connector, cable, or long PCB route, consider buffering or matched termination according to the interface requirements, and keep the return path continuous to prevent additional jitter or timing uncertainty.
合规信息
No compliance declarations were present in the verified device listings. Compliance status must be confirmed from the current manufacturer documentation or declaration before qualification.