Texas Instruments

INA129SJD - Precision Low-Power Instrumentation Amplifier | TI

MPN: INA129SJD ✓ فعال
±18 V Vdss 700 µA typical Id 8-CDIP (0.300 in, 7.62 mm) Package
MOQ: 1 |

INA129SJD جائزہ

The Texas Instruments INA129SJD is a precision, low-power instrumentation amplifier with a typical supply current of 700 µA, input protection across ±40 V, and a wide ±18 V supply range. The device is offered in an 8-pin CDIP package with a 0.300-inch, 7.62 mm lead spacing. Its instrumentation-amplifier architecture is intended for differential sensor signals where accurate gain, high common-mode rejection, and low input bias current are important.

An instrumentation amplifier is a specialized amplifier category designed to amplify small differential signals while rejecting large common-mode voltages. INA129 belongs to the broader hierarchy of operational amplifiers, amplifier ICs, and analog signal-chain semiconductors. It is particularly useful when a sensor output is much smaller than the voltage referenced to ground and must be measured accurately in industrial, medical, or test equipment.

Key characteristics include a typical input bias current of 50 nA, a typical common-mode rejection ratio of 95 dB, and a slew rate of 4 V/µs. The INA129-HT family uses a gain equation compatible with the AD620, making it appropriate for designs based on familiar INA129 or AD620 gain-setting networks. The input stage also supports operation where transient voltage appears at the measurement inputs, while low quiescent current helps limit power consumption in continuously energized equipment.

The INA129SJD combines differential measurement capability with a low-power architecture suitable for battery-operated and space-constrained instruments. Its typical 700 µA supply current supports efficient operation when the amplifier remains active during long measurement intervals. Designers can use the external gain resistor to establish the required amplification while preserving the differential input arrangement and common-mode rejection characteristics.

Typical uses include bridge-strip and RTD sensor interfaces, isolated industrial monitoring, medical instrumentation, battery-powered data acquisition, and precision laboratory measurement. The high input impedance associated with the 50 nA typical bias current reduces loading on high-impedance sources. In systems with substantial ground offsets, the 95 dB typical common-mode rejection helps preserve measurement integrity.

When laying out the circuit, keep the input, feedback, and gain-resistor paths compact and electrically symmetric to minimize parasitic imbalance. Place input protection and filtering components only after checking their capacitance, leakage, and tolerance effects on input bias current and common-mode performance. Verify the power-supply arrangement against the ±18 V operating range and the ±40 V protected-input condition.

This product overview combines the manufacturer specifications with package information, application guidance, and compatible same-family options for engineers evaluating instrumentation-amplifier selections. The comparison and design notes emphasize practical fit, package compatibility, and the trade-offs between precision, protection, power, and gain functionality.

کے لیے ڈراپ اِن متبادل INA129SJD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

INA128SJD

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-CDIP (0.300 in, 7.62 mm)
Same 8-CDIP footprint and pin arrangement; INA128 is the earlier family with a different gain architecture, while INA129 uses a lower-power design with an AD620-compatible gain equation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA127SJD

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-CDIP (0.300 in, 7.62 mm)
Same 8-CDIP footprint and pin arrangement; gain range and gain-setting behavior differ from INA129, so resistor-network and bandwidth checks are required.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA126SJD

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-CDIP (0.300 in, 7.62 mm)
Same 8-CDIP footprint and pin arrangement; gain equation and gain range differ from INA129, requiring circuit-level validation before replacement.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA120SJD

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-CDIP (0.300 in, 7.62 mm)
Same 8-CDIP footprint and pin arrangement; gain range and precision performance differ from INA129, so the external gain network and signal bandwidth must be recalculated.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA129SJD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Precision instrumentation amplifier
Number of Circuits 1 circuit
پیکیج 8-CDIP (0.300 in, 7.62 mm)
ماؤنٹنگ ٹائپ Through-hole
Supply Voltage Range ±18 V
سپلائی کرنٹ 700 µA typical
کوئیسینٹ کرنٹ 2 mA typical
Input Bias Current 50 nA typical
Common-Mode Rejection Ratio 95 dB typical
Input Protection Range ±40 V
Slew Rate 4 V/µs
Offset Voltage 25 µV typical
Common-Mode Rejection at Gain 100 or Higher 93 dB
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
Gain Equation Compatible with the AD620 gain equation
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

INA129SJD 8-cdip (0.300 in, 7.62 mm) پن کنفیگریشن گائیڈ

INA129SJD (8-cdip (0.300 in, 7.62 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

INA129SJD کے لیے 8-cdip (0.300 in, 7.62 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں INA129SJD.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

INA129SJD کے لیے موزوں ہے 6 ایپلیکیشنs: Bridge and Load-Cell Measurement, RTD Temperature Sensing, Battery-Powered Data Acquisition, Medical Signal Conditioning, Precision Test and Measurement, Industrial Process Monitoring.

🏭

Bridge and Load-Cell Measurement

The INA129SJD fits bridge-based sensor front ends that require differential excitation-signal measurement with substantial common-mode voltage. Its 95 dB typical common-mode rejection helps preserve small bridge differentials, while the 50 nA typical input bias current limits loading on the sensor and feedback network. The amplifier can be placed close to the bridge with the gain resistor and feedback components arranged symmetrically. A 4 V/µs slew rate supports measurement bandwidth, although the exact closed-loop bandwidth must be checked at the selected gain before setting the system sampling rate.

🌡️

RTD Temperature Sensing

The INA129SJD is suitable for resistance-based temperature sensors when the measurement requires low input bias current and rejection of voltage common to both sensor leads. Its typical 50 nA bias current reduces the error introduced into a high-resistance RTD circuit, and the 95 dB typical common-mode rejection helps distinguish the small resistance-derived differential signal from ground offsets. Place the device near the RTD connections, keep input traces matched, and use high-quality resistors for excitation and gain-setting functions. Leakage from board contamination and protection components can dominate otherwise accurate RTD measurements.

📱

Battery-Powered Data Acquisition

The INA129SJD fits portable acquisition systems where continuous amplifier power must remain low. Its 700 µA typical supply current reduces demand on the battery and power-conversion subsystem, while the instrumentation-amplifier configuration simplifies the acquisition of differential sensor outputs. The ±18 V supply capability supports bipolar-style laboratory rails, although lower-voltage operation may be used where signal levels permit. Design the analog filter and gain network to avoid excessive current, and use low-leakage input protection components if the source impedance is high.

💊

Medical Signal Conditioning

The INA129SJD can be used in precision medical instrumentation when a differential bio-signal or sensor-derived voltage must be amplified before conversion. The 25 µV typical offset voltage supports low-level measurement, and the 95 dB typical common-mode rejection helps reject offsets shared by the sensing electrodes and analog front end. The 50 nA typical input bias current is advantageous for high-impedance sources. Actual medical suitability remains application-specific: validate leakage, safety isolation, noise, bandwidth, and applicable medical requirements rather than treating the amplifier grade alone as system certification.

🔧

Precision Test and Measurement

The INA129SJD is appropriate for laboratory instrumentation that measures low-level differential voltages while rejecting a larger common-mode reference. The 4 V/µs slew rate supports faster input transitions, and the AD620-compatible gain equation simplifies adaptation of designs using a familiar resistor-based gain network. Use the amplifier close to the source connector to minimize noise pickup, maintain symmetrical routing around the differential inputs, and select the external gain resistor for the required accuracy and stability. Check the applicable gain-bandwidth limit before selecting the maximum measurement rate.

🏭

Industrial Process Monitoring

The INA129SJD fits industrial monitoring systems that combine long sensor wiring with relatively small differential signals. The ±40 V input protection rating provides additional tolerance for transient voltage at the measurement inputs, while 95 dB typical common-mode rejection helps reject plant-level voltage offsets. Common-mode range, gain, bandwidth, and protection behavior must all remain within the final operating conditions. A shielded enclosure, protected input routing, and properly scaled gain network are important when the device is installed near motors, switching equipment, or other noisy industrial sources.

What is the INA129SJD?
The INA129SJD is a Texas Instruments precision, low-power, single-circuit instrumentation amplifier in an 8-CDIP package. According to the Texas Instruments INA129 product page and manufacturer datasheet, it combines a typical supply current of 700 µA, a 50 nA typical input bias current, a 95 dB typical common-mode rejection ratio, and input protection to ±40 V. It is intended for differential sensor measurements and other precision analog signal-conditioning applications.
What are the key specifications of INA129SJD that engineers should know?
The INA129SJD combines a ±18 V supply range, 700 µA typical supply current, 4 V/µs slew rate, 25 µV typical offset voltage, and 50 nA typical input bias current in an 8-CDIP package. According to the Texas Instruments INA129 product page and manufacturer datasheet, its typical common-mode rejection ratio is 95 dB, while the INA129-HT family provides 93 dB rejection at gains of 100 or higher.
Where to buy INA129SJD online?
The INA129SJD can be requested through the Request a Quote form on this page. The form is the appropriate route for current availability, lot-specific packaging requirements, and an order quotation. No fixed retail price is published here, and lead time should be confirmed for the selected package and quantity through the same form.
What is the price of INA129SJD?
The current price of INA129SJD depends on quantity, packaging, and order conditions. Use the Request a Quote form on this page to request a current quotation for the exact 8-CDIP ordering code. This approach avoids presenting a stale figure and allows the quotation to reflect the requested quantity and current component availability.
What is the lead time for INA129SJD?
A current lead time for INA129SJD must be confirmed through the Request a Quote form on this page. Submit the required quantity and preferred tube or other delivery format so the quote can reflect the available manufacturer inventory and production status. The 8-CDIP package and high-temperature INA129-HT ordering variant should be stated explicitly.
Is INA129SJD in stock?
Current INA129SJD stock should be checked through the Request a Quote form on this page. Include the required order quantity and whether the shipment must use the device's tube packaging. The request will provide a current supply response without presenting availability as guaranteed before confirmation.
Is INA129SJD suitable for high-impedance sensor measurement?
Yes, the INA129SJD is suitable for many high-impedance sensor front ends because its typical input bias current is only 50 nA. According to the Texas Instruments INA129 product page and manufacturer datasheet, the low bias current limits source loading, while 95 dB typical common-mode rejection helps suppress common-mode voltage present on sensor lines. Input capacitance and leakage from protection components should still be minimized.
What is the difference between INA129SJD and INA128SJD?
The INA129SJD and INA128SJD belong to the same TI instrumentation-amplifier family and can share the 8-CDIP footprint, but their internal design and gain characteristics are not identical. According to the Texas Instruments INA129 product page, the INA129 is the lower-power upgrade to the INA128 and uses an AD620-compatible gain equation. Confirm gain range, supply current, and offset limits against the intended circuit before interchangeability.
When should I choose INA129SJD over INA128SJD?
Choose the INA129SJD when low power and compatibility with the AD620 gain-setting equation are priorities. The INA128SJD is appropriate when an existing design was built around the INA128 architecture and its electrical limits are already validated. The INA129 family supports a typical 700 µA supply current and an AD620-compatible gain equation, according to the Texas Instruments product page.
Can INA120SJD replace INA129SJD?
The INA120SJD is a same-family candidate with a matching 8-pin DIP format, but it should not be treated as an unconditional substitution. According to the Texas Instruments INA129 family information, the INA129 uses an AD620-compatible gain equation, whereas the INA120 family serves a different gain and precision position in the family. Verify the gain equation, gain range, offset, bandwidth, supply current, and input protection before replacing an INA129SJD.
What can replace INA129SJD?
The closest defensible replacements are TI family members that use the same 8-CDIP footprint, such as the INA128SJD, INA127SJD, INA126SJD, or INA120SJD, subject to electrical validation. According to the Texas Instruments INA129 product page, the INA129 is an upgrade to the INA128 and has an AD620-compatible gain equation. A candidate should be selected only after checking gain, offset, bandwidth, supply current, and protection requirements.
Is INA129SJD the same as the AD620?
No, the INA129SJD and AD620 are distinct devices even though their gain equations are related. According to the Texas Instruments INA129-HT product page, the INA129-HT gain equation is compatible with the AD620. Compatibility of the resistor calculation does not establish identical offset, bandwidth, protection, supply-current, or package characteristics, so PCB and electrical compatibility must be checked separately.
Where to download the INA129SJD datasheet PDF?
Download the INA129SJD documentation from the Texas Instruments INA129 product page or the INA129-HT part-details page linked in the datasheet references. The official INA129-HT entry identifies the manufacturer datasheet as Revision F. Use the manufacturer PDF for pin assignments, gain equations, electrical limits, package drawings, and application guidance.
Where can I find the INA129SJD pinout?
The authoritative INA129SJD pin assignment is shown in the pin-configuration section of the Texas Instruments manufacturer datasheet. The component uses an 8-CDIP package. Use that table when assigning supply, reference, input, output, and gain-resistor connections, and cross-check every net against the exact INA129SJD ordering code.
How should power and thermal limits be handled in an INA129SJD design?
Keep the supply within the stated ±18 V operating range and account for heat dissipation under the actual output waveform. The INA129SJD has a low typical supply current of 700 µA, but the dissipated power still depends on supply voltage, output voltage, and load. Use the manufacturer datasheet for maximum supply, input, output, and junction-temperature limits before selecting resistors or board cooling.
Does INA129SJD support automotive or industrial temperature requirements?
The INA129SJD is associated with the INA129-HT family and is specified for operation from -40 °C to +85 °C. According to the Texas Instruments INA129 product page, INA12x devices are available in specified packages for that temperature range. Automotive qualification must not be inferred from the temperature rating; confirm AEC-Q100 status and the exact orderable part before using it in an automotive design.

کے لیے انجینئرنگ ریفرنس ڈیٹا INA129SJD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the INA129SJD for a precision, low-power differential measurement design that uses an 8-CDIP footprint and benefits from the AD620-compatible gain equation. Its 700 µA typical supply current, 50 nA typical input bias current, and 95 dB typical common-mode rejection make it well suited to high-impedance sensors and portable instruments. Consider the INA128SJD only when an existing INA128-based design has already validated its gain network and signal performance. INA126SJD and INA127SJD can share the family footprint, but their gain equations, ranges, and electrical limits require circuit-level review. INA120SJD is the broadest same-family option for replacement exploration, yet it may require more gain, bandwidth, and precision recalculation. For any substitution, verify the pin arrangement, supply range, common-mode range, offset, input bias current, gain error, bandwidth, slew rate, and input protection before approving it.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ INA128SJD INA127SJD INA126SJD INA120SJD
Package 8-CDIP (0.300 in, 7.62 mm) 8-CDIP (0.300 in, 7.62 mm) 8-CDIP (0.300 in, 7.62 mm) 8-CDIP (0.300 in, 7.62 mm) 8-CDIP (0.300 in, 7.62 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

اہم امتیازی خصوصیات

  • Lower-power INA129 architecture in the same DIP family (بمقابلہINA128SJD)
  • Strong typical common-mode rejection (بمقابلہINA126SJD)
  • Protected differential inputs for industrial environments (بمقابلہINA120SJD)
  • Precision offset for low-level measurement (بمقابلہINA127SJD)

ڈیزائن نوٹس

Route the two differential inputs as a closely matched pair and keep them away from clocks, switching nodes, and high-current return paths. Place the INA129SJD near the sensor or connector so that small sensor signals are amplified before board-level noise is picked up. Keep the gain-resistor and feedback connections short and symmetrical, because unequal parasitic capacitance can reduce common-mode rejection at higher frequencies.

Decouple each supply connection near the device with a local bypass capacitor selected for the required bandwidth and effective capacitance. Verify startup, output settling, and noise behavior with the actual source impedance because a large series impedance can create an additional pole. Keep the operating supply within ±18 V and distinguish that normal operating limit from the ±40 V protected-input condition.

Do not assume that every INA-series amplifier uses the same gain equation or gain range. The INA129-HT gain equation is compatible with the AD620, but INA120, INA126, INA127, and INA128 family members can differ in gain, bandwidth, offset, and supply-current behavior. Recalculate the external resistor and verify signal bandwidth whenever changing between family members.

For high-impedance sensors, minimize leakage from PCB contamination, connectors, protection devices, and flux residue. The 50 nA typical input bias current is a useful starting point, but error current can become significant when source resistance is high. Use guarding where appropriate and select low-leakage components whose capacitance does not unbalance the differential inputs.

Estimated power dissipation is calculated as P = (VS - VOUT) × IOUT plus internal bias current effects. For example, at 15 V supply, 5 V output, and 1 mA load, the voltage-drop loss is approximately 10 mW before reference and bias-current losses. Use the manufacturer's maximum power and junction-temperature ratings to determine whether the CDIP layout requires thermal copper or airflow.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The INA129 family is described by Texas Instruments as precision, low-power instrumentation amplifiers for operation from -40 °C to +85 °C. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product material.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

INA129SJD datasheet INA129SJD pinout INA129SJD datasheet pdf INA129SJD equivalent INA129SJD replacement INA129SJD cross reference INA129SJD vs INA128SJD INA129SJD 8-CDIP footprint Texas Instruments INA129SJD INA129SJD precision instrumentation amplifier INA129SJD load cell amplifier INA129SJD RTD signal conditioner INA129SJD price INA129SJD stock what is the gain equation of INA129SJD

متعلقہ اجزاء اور اصطلاحات

Texas Instruments INA129SJD INA129-HT INA128SJD INA127SJD INA126SJD INA120SJD AD620 precision instrumentation amplifier instrumentation amplifier amplifier IC analog signal conditioner differential amplifier common-mode rejection ratio CMRR input bias current offset voltage slew rate gain equation 8-CDIP DIP package through-hole package bridge sensor RTD sensor RoHS REACH AEC-Q100
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں