Texas Instruments

INA163UA/2K5 - 2.5x Low-Noise Instrumentation Amp | TI

MPN: INA163UA/2K5 ✓ فعال
Dual supply Vdss 12 µA Id 14-pin SOIC (D) Package
MOQ: 1 |

INA163UA/2K5 جائزہ

The Texas Instruments INA163UA/2K5 is a single-circuit, low-noise, low-distortion instrumentation amplifier with a fixed gain of 2.5, housed in a 14-pin SOIC package. It accepts dual supply voltages from ±4.5 V to ±18 V, with ±15 V identified as the typical dual-supply condition. Its current-feedback architecture provides wide bandwidth and dynamic response across a range of gain settings, making it suitable for precision low-level signal conditioning.

An instrumentation amplifier is a specialized analog amplifier that measures the voltage difference between two inputs while rejecting common-mode interference. The INA163 belongs to the broader hierarchy of instrumentation amplifier, differential amplifier, analog amplifier, and semiconductor. Its internal current-feedback circuitry is particularly useful where the input signal is small, source impedance is low, and cable or grounding noise could obscure the measurement.

The fixed 2.5-times gain of INA163UA/2K5 provides a practical compromise between signal amplification and bandwidth. It can amplify differential sensor, microphone, or balanced-line signals without requiring an external gain-setting network. Its low-noise, low-distortion design also helps preserve signal integrity when the amplified output is measured by an ADC, audio converter, or precision analog front end.

Texas Instruments describes the INA163 as a monolithic instrumentation amplifier using current-feedback circuitry. This architecture supports wide bandwidth and excellent dynamic response over a wide range of gain. The device operates from dual supplies, allowing output signals centered around ground when equal positive and negative rails are used. Its SOIC-14 package is suitable for conventional surface-mount PCB assembly.

Typical uses include low-level balanced microphone amplification, industrial bridge-sensor interfaces, medical instrumentation, audio signal conditioning, and precision data-acquisition front ends. The component is particularly appropriate when a differential source must be amplified while rejecting common-mode voltage present on both input lines.

For implementation, follow the manufacturer pin-description table when connecting inputs, feedback-network connections, reference voltage, and supplies. Maintain suitable input common-mode range and output swing at the selected supply voltage. Decoupling capacitors should be placed close to the supply pins, while the amplifier should be positioned away from noisy switching nodes and high-current return paths.

This page combines the manufacturer device description, ordering information, package details, technical constraints, and practical replacement guidance. It also identifies where an exact drop-in substitute cannot be confirmed without causing a change in gain, pin function, electrical performance, or board-level compatibility.

کے لیے ڈراپ اِن متبادل INA163UA/2K5 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں INA163UA/2K5 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Package.

Texas Instruments
Architecture: Monolithic current-feedback instrumentation amplifier
Package: 14-pin SOIC

INA166UA/2K5

✅ ڈراپ-اِن
📦 14-pin SOIC (D)
Uses the INA166 series rather than INA163; comparison data identifies the same 2.5 gain option, while bandwidth, noise, distortion, common-mode range, and exact pin behavior require verification

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

INA163UA

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC (D)
Low-noise, low-distortion instrumentation amplifier · Monolithic current-feedback instrumentation amplifier · 1 circuit

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

INA163UA/2K5 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Low-noise, low-distortion instrumentation amplifier
Number of Circuits 1 circuit
Gain 2.5 V/V
Architecture Current-feedback
Supply Voltage Type Dual supply
Minimum Total Supply Voltage 9 V (±4.5 V)
Maximum Total Supply Voltage 36 V (±18 V)
Typical Total Supply Voltage 30 V (±15 V)
کوئیسینٹ کرنٹ 12 µA
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
پیکیج 14-pin SOIC (D)
ماؤنٹنگ ٹائپ Surface mount

INA163UA/2K5 14-pin soic (d) پن کنفیگریشن گائیڈ

INA163UA/2K5 (14-pin soic (d) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

INA163UA/2K5 کے لیے 14-pin soic (d) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں INA163UA/2K5.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

INA163UA/2K5 کے لیے موزوں ہے 6 ایپلیکیشنs: Balanced Microphone Preamplifier, Industrial Bridge Sensor Interface, Medical Signal Conditioning, Precision Data Acquisition, Audio Line-Level Conditioning, Low-Level Sensor Measurement.

🎧

Balanced Microphone Preamplifier

The INA163UA/2K5 fits low-level balanced audio acquisition because its low-noise, low-distortion architecture is intended for signals such as microphones and other low-impedance sources. The fixed 2.5-times gain adds modest signal level without requiring a general-purpose op-amp stage. Place the device close to the connector and maintain short, symmetric input traces so that cable pickup and ground differences do not become significant relative to the source signal. The current-feedback topology provides the bandwidth and dynamic-response behavior needed for audio paths. Confirm the available output swing, input common-mode range, reference connection, and supply headroom in the manufacturer datasheet before setting the microphone bias and downstream gain.

🏭

Industrial Bridge Sensor Interface

The INA163UA/2K5 is suitable for the input stage of an industrial bridge measurement when the differential millivolt-level signal must be amplified while rejecting common-mode voltage. Its 2.5-times fixed gain provides an initial signal increase, and its low-noise, low-distortion characterization supports precision measurement chains. The dual supply range of ±4.5 V to ±18 V allows a centered output around ground when equal positive and negative rails are used. Keep the bridge excitation return and sensor ground paths away from switching-node currents. Verify input common-mode limits under worst-case bridge imbalance and confirm that the analog-to-digital converter receives the resulting signal without exceeding its input range.

💊

Medical Signal Conditioning

The INA163UA/2K5 can serve as a low-level front-end element in medical instrumentation when the design requires low noise, low distortion, and differential signal handling. The fixed 2.5-times gain is appropriate as an initial conditioning stage before higher-gain or conversion circuitry. Dual supplies allow the output to remain centered around ground, which can simplify downstream acquisition when system power rails are symmetric. Because medical designs also depend on isolation, leakage, and application-specific validation, this amplifier should be treated as one block within the complete signal chain. Follow the pin-description and application sections of the manufacturer datasheet, and independently verify patient-protection, diagnostic, and regulatory requirements before production use.

🖥️

Precision Data Acquisition

The INA163UA/2K5 is useful in a precision data-acquisition front end when a differential sensor output must be conditioned before conversion. Its 2.5-times fixed gain offers a defined scaling factor, while the current-feedback architecture is intended to provide wide bandwidth and excellent dynamic response. Place the amplifier near the sensor or connector and route the differential pair as a compact pair to minimize conversion of common-mode noise into differential error. Use a quiet reference connection and confirm the amplifier output can drive the input network of the following converter without violating output-swing limits. The manufacturer application information and pin table should govern supply decoupling, feedback connections, and operating limits.

🎧

Audio Line-Level Conditioning

The INA163UA/2K5 can condition balanced audio-line signals where modest fixed gain, low distortion, and broad dynamic response are important. Its 2.5-times amplification is useful as an input stage rather than the sole high-gain element in a mixer or preamplifier. The low-noise architecture helps preserve quiet passages, while the low-distortion design is valuable when cascading multiple analog stages. Connect the balanced source to the designated differential inputs and use the datasheet-defined reference arrangement for the downstream circuit. Keep analog return currents separate from digital and power-converter paths, and verify headroom at maximum signal level so that neither the amplifier output nor the following stage approaches clipping.

🧩

Low-Level Sensor Measurement

The INA163UA/2K5 is appropriate for conditioning low-level differential sensor outputs where a fixed 2.5-times gain and noise performance are more useful than adjustable gain. It can provide a clean, scaled representation of a sensor centered around ground while rejecting voltage common to both input terminals. The instrument-amplifier function simplifies the input stage compared with a discrete differential-amplifier network, although external filtering and output buffering may still be required. Evaluate sensor output impedance, cable length, common-mode excursions, and sampling bandwidth together. Use the manufacturer datasheet to select stable external components and establish the reference potential required by the system ADC.

What is the INA163UA/2K5?
The INA163UA/2K5 is a Texas Instruments single-circuit instrumentation amplifier with a fixed gain of 2.5 V/V and a 14-pin SOIC package. According to the Texas Instruments INA163 product page, it uses current-feedback circuitry to provide wide bandwidth and excellent dynamic response. It is intended for low-level differential signals where common-mode rejection, low noise, and low distortion are important.
What is the gain of INA163UA/2K5?
The INA163UA/2K5 has a fixed gain of 2.5 V/V. The gain is established by the device variant rather than by an external resistor in the INA163UA/2K5 ordering configuration. According to the Texas Instruments INA163 ordering information, the /2K5 designation identifies this gain option, making it appropriate when a modest, fixed differential amplification is required.
What supply voltage does INA163UA/2K5 require?
The INA163UA/2K5 requires dual supplies totaling between 9 V and 36 V, corresponding to ±4.5 V through ±18 V. The typical dual supply is ±15 V. According to the Texas Instruments INA163 documentation and the component comparison information, the device uses dual power rails; adequate output headroom and input common-mode range must also be maintained.
What package does INA163UA/2K5 use?
The INA163UA/2K5 is supplied in a 14-pin SOIC, identified as package D by Texas Instruments. The manufacturer part-details page lists 14 pins and a surface-mount package. Use the INA163 manufacturer pin-description table when assigning PCB nets because the fixed-gain configuration still contains amplifier, reference, feedback, and power connections.
Where can I download the INA163UA/2K5 datasheet PDF?
The official INA163UA/2K5 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina163.pdf. The manufacturer document contains the electrical characteristics, gain-selection information, application information, and pin descriptions for the INA163 family. Consult its ordering table to confirm that INA163UA/2K5 is the exact gain, temperature, and package configuration being designed.
Where can I find the INA163UA/2K5 pinout?
The INA163UA/2K5 pinout is published in the Pin Configuration and Functions section of the official Texas Instruments INA163 datasheet. The part uses a 14-pin SOIC package, but engineers should use the manufacturer table rather than infer connections from another INA163 gain variant. The pin table identifies each package lead and the associated signal, reference, feedback, and supply function.
Is INA163UA/2K5 suitable for microphone and audio signal conditioning?
Yes, the INA163UA/2K5 is suitable for low-level balanced microphone and audio signal conditioning because it is optimized for low noise, low distortion, and wide bandwidth. Its current-feedback architecture supports dynamic response beyond that expected from many voltage-feedback instrumentation amplifiers. The fixed gain of 2.5 V/V is modest, so downstream amplification may still be required for very low-level sources.
Where can I buy INA163UA/2K5 online?
Use the Request a Quote form on this page to request INA163UA/2K5 pricing, current stock, minimum order quantity, and lead time. The exact ordering code, including the /2K5 gain suffix, should be stated in the request. Current commercial terms are established through the quote process rather than embedded as static customer-facing pricing on this product page.
What is the price of INA163UA/2K5?
Use the Request a Quote form on this page for the current INA163UA/2K5 unit price and available quantity breaks. The requested quotation should specify the exact MPN, INA163UA/2K5, and the required delivery quantity. Commercial pricing can vary with quantity, packaging, date, and supply conditions, so a current quotation is the appropriate purchasing reference.
What is the lead time for INA163UA/2K5?
Request the current INA163UA/2K5 lead time through the Request a Quote form on this page. Include your required quantity, approved delivery date, destination, and whether factory-sealed packaging is required. Texas Instruments identifies INA163UA/2K5 in the SOIC package, while shipment timing should be confirmed against current manufacturing and distribution conditions.
Is INA163UA/2K5 in stock?
Current INA163UA/2K5 inventory should be confirmed through the Request a Quote form on this page. State the exact quantity needed and any scheduled project demand so the supplier can return an availability and lead-time response. The device is listed by Texas Instruments in a 14-pin SOIC package, but live stock should not be inferred from a catalog entry.
What are the key specifications of INA163UA/2K5 that engineers should know?
The principal INA163UA/2K5 specifications are a 2.5 V/V fixed gain, one amplifier circuit, dual supply operation from ±4.5 V to ±18 V, a typical ±15 V supply, and a 14-pin SOIC package. Texas Instruments describes the device as a low-noise, low-distortion instrumentation amplifier based on current-feedback circuitry, with wide bandwidth and excellent dynamic response.
What is the best drop-in replacement for INA163UA/2K5?
The best drop-in replacement must match the 14-pin SOIC footprint, 2.5 V/V gain, electrical limits, and pin functions of INA163UA/2K5. INA166UA/2K5 is a same-manufacturer candidate appearing in comparison data, but its input and dynamic characteristics must be checked against the target design before substitution. No unqualified universal replacement is asserted without a complete parametric and pin-level review.
Can INA166UA/2K5 replace INA163UA/2K5?
INA166UA/2K5 may be considered as a same-brand, 2.5-gain candidate, but replacement requires verification of its 14-pin pin functions, supply range, common-mode range, bandwidth, noise, distortion, and output behavior. The comparison information confirms that it is a distinct INA166 device rather than an identical INA163 orderable part. Validate the reference and feedback connections on the actual PCB before approving the change.
When should I choose INA163UA/2K5 instead of a generic instrumentation amplifier?
Choose INA163UA/2K5 when the design requires a fixed 2.5-times differential gain, low noise, low distortion, current-feedback bandwidth, and a 14-pin SOIC implementation. Texas Instruments specifically identifies low-level audio, industrial instrumentation, and medical applications as suitable areas. A generic amplifier may be preferable only if its gain, bandwidth, common-mode range, supply behavior, and pinout are at least as suitable.
What is the operating temperature range of INA163UA/2K5?
The Texas Instruments product-details listing specifies an operating temperature range of -40 °C to +85 °C for INA163UA/2K5. Some comparison pages report a broader upper limit, but the manufacturer ordering information is the controlling reference for the exact orderable MPN. For industrial equipment, verify ambient temperature, self-heating, and the system enclosure conditions.

کے لیے انجینئرنگ ریفرنس ڈیٹا INA163UA/2K5 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose INA163UA/2K5 when the PCB requires the INA163 family's current-feedback instrumentation-amplifier behavior, a fixed 2.5-times gain, dual ±4.5 V to ±18 V operation, and a 14-pin SOIC footprint. It is particularly suitable for low-level balanced audio, bridge-sensor, medical instrumentation, and precision data-acquisition inputs where low noise and low distortion are important. Consider INA166UA/2K5 only after checking its pin functions, bandwidth, noise, distortion, common-mode range, stability, and output drive against the existing INA163 design. Do not substitute INA163UA without confirming its gain and external connection requirements. Because only two same-brand candidates could be identified without asserting unsupported cross-brand equivalence, every approved replacement should undergo signal-level, stability, common-mode, supply, and PCB-footprint validation.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ INA166UA/2K5 INA163UA
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D)
Product Family INA163 INA166 INA163
Mounting Type Surface mount Surface mount Surface mount

اہم امتیازی خصوصیات

  • Exact fixed-gain ordering option (بمقابلہINA163UA)
  • INA163 current-feedback performance positioning (بمقابلہINA166UA/2K5)
  • Manufacturer-published ordering configuration (بمقابلہINA163UA)

ڈیزائن نوٹس

Route the two differential inputs as a close, symmetric pair and connect them directly to the INA163 pins according to the manufacturer pin-description table. Place the device near the source connector or sensor to minimize pickup of external electromagnetic noise. Keep the input path away from switching inductors, power-converter return currents, and digital clock edges because even a small differential conversion of common-mode noise can become significant at microphone or sensor signal levels.

Use the minimum dual-supply voltage permitted by the design, but confirm that the selected rails provide adequate input common-mode range and output swing for the complete signal range. Texas Instruments specifies operation from ±4.5 V to ±18 V. Place supply-decoupling components close to the relevant pins, connect the ground return thoughtfully, and avoid adding filtering capacitance at the input pins that could alter the current-feedback network's stability or bandwidth.

Establish the reference connection and any external feedback or filtering components exactly as shown in the INA163 manufacturer's application information. Current-feedback amplifiers can interact with excessive output loading and unsuitable output capacitance, so avoid adding an arbitrary output capacitor or low-impedance load without checking stability. Evaluate the complete input-to-output network with the intended source impedance and cable capacitance, particularly for the 2.5-times fixed-gain configuration.

Do not substitute a different INA163 gain option solely because it uses the same 14-pin SOIC outline. Gain-set options can use different feedback connections, while INA166UA/2K5 belongs to a different device family. Compare pin functions, supply limits, common-mode range, bandwidth, noise, distortion, and output behavior before treating either listed candidate as a drop-in replacement. Confirm the exact INA163UA/2K5 ordering code during incoming inspection.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No definitive compliance status was stated in the manufacturer page excerpts or distributor results. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals status using current manufacturer documentation before production release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

INA163UA/2K5 INA163UA/2K5 datasheet INA163UA/2K5 datasheet pdf INA163UA/2K5 pinout INA163UA/2K5 equivalent INA163UA/2K5 replacement INA163UA/2K5 cross reference INA163UA/2K5 price INA163UA/2K5 stock Texas Instruments INA163UA/2K5 INA163UA/2K5 2.5 gain INA163UA/2K5 SOIC-14 INA163UA/2K5 instrumentation amplifier INA163UA/2K5 vs INA166UA/2K5 INA163UA/2K5 microphone amplifier

متعلقہ اجزاء اور اصطلاحات

Texas Instruments INA163UA/2K5 INA166UA/2K5 INA163UA INA163 INA166 instrumentation amplifier differential amplifier analog amplifier semiconductor low-dropout? no current-feedback architecture common-mode rejection low-noise amplifier low-distortion amplifier fixed gain 2.5 V/V gain dual supply ±4.5 V minimum supply ±18 V maximum supply 14-pin SOIC SOIC package family surface mount audio signal conditioning bridge sensor interface
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں