Texas Instruments

INA163UA/2K5 - 2.5x Low-Noise Instrumentation Amp | TI

MPN: INA163UA/2K5 ✓ 啟用中
Dual supply Vdss 12 µA Id 14-pin SOIC (D) Package
MOQ: 1 |

INA163UA/2K5 概覽

The Texas Instruments INA163UA/2K5 is a single-circuit, low-noise, low-distortion instrumentation amplifier with a fixed gain of 2.5, housed in a 14-pin SOIC package. It accepts dual supply voltages from ±4.5 V to ±18 V, with ±15 V identified as the typical dual-supply condition. Its current-feedback architecture provides wide bandwidth and dynamic response across a range of gain settings, making it suitable for precision low-level signal conditioning.

An instrumentation amplifier is a specialized analog amplifier that measures the voltage difference between two inputs while rejecting common-mode interference. The INA163 belongs to the broader hierarchy of instrumentation amplifier, differential amplifier, analog amplifier, and semiconductor. Its internal current-feedback circuitry is particularly useful where the input signal is small, source impedance is low, and cable or grounding noise could obscure the measurement.

The fixed 2.5-times gain of INA163UA/2K5 provides a practical compromise between signal amplification and bandwidth. It can amplify differential sensor, microphone, or balanced-line signals without requiring an external gain-setting network. Its low-noise, low-distortion design also helps preserve signal integrity when the amplified output is measured by an ADC, audio converter, or precision analog front end.

Texas Instruments describes the INA163 as a monolithic instrumentation amplifier using current-feedback circuitry. This architecture supports wide bandwidth and excellent dynamic response over a wide range of gain. The device operates from dual supplies, allowing output signals centered around ground when equal positive and negative rails are used. Its SOIC-14 package is suitable for conventional surface-mount PCB assembly.

Typical uses include low-level balanced microphone amplification, industrial bridge-sensor interfaces, medical instrumentation, audio signal conditioning, and precision data-acquisition front ends. The component is particularly appropriate when a differential source must be amplified while rejecting common-mode voltage present on both input lines.

For implementation, follow the manufacturer pin-description table when connecting inputs, feedback-network connections, reference voltage, and supplies. Maintain suitable input common-mode range and output swing at the selected supply voltage. Decoupling capacitors should be placed close to the supply pins, while the amplifier should be positioned away from noisy switching nodes and high-current return paths.

This page combines the manufacturer device description, ordering information, package details, technical constraints, and practical replacement guidance. It also identifies where an exact drop-in substitute cannot be confirmed without causing a change in gain, pin function, electrical performance, or board-level compatibility.

直接替換替代品,適用於 INA163UA/2K5 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: INA163UA/2K5 (相同外形與佔位) — 差異在於 Architecture, Package.

Texas Instruments
Architecture: Monolithic current-feedback instrumentation amplifier
Package: 14-pin SOIC

INA166UA/2K5

✅ 直接替換
📦 14-pin SOIC (D)
Uses the INA166 series rather than INA163; comparison data identifies the same 2.5 gain option, while bandwidth, noise, distortion, common-mode range, and exact pin behavior require verification

📋 參考替代品(不在目錄中)

INA163UA

✅ 直接替換
Texas Instruments
📦 14-pin SOIC (D)
Low-noise, low-distortion instrumentation amplifier · Monolithic current-feedback instrumentation amplifier · 1 circuit

聯絡詢價

查看資料表 →

INA163UA/2K5 最大額定值與電氣特性

Amplifier Type Low-noise, low-distortion instrumentation amplifier
Number of Circuits 1 circuit
Gain 2.5 V/V
Architecture Current-feedback
Supply Voltage Type Dual supply
Minimum Total Supply Voltage 9 V (±4.5 V)
Maximum Total Supply Voltage 36 V (±18 V)
Typical Total Supply Voltage 30 V (±15 V)
靜態電流 12 µA
工作溫度範圍 -40 °C to +85 °C
封裝 14-pin SOIC (D)
安裝類型 Surface mount

INA163UA/2K5 14-pin soic (d) 腳位配置指南

INA163UA/2K5(14-pin soic (d) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

INA163UA/2K5 的 14-pin soic (d) 封裝腳位圖

無詳細腳位定義資料: INA163UA/2K5.

請參閱 資料表 以查看完整腳位配置。

典型應用

INA163UA/2K5 適用於 6 應用s: Balanced Microphone Preamplifier, Industrial Bridge Sensor Interface, Medical Signal Conditioning, Precision Data Acquisition, Audio Line-Level Conditioning, Low-Level Sensor Measurement.

🎧

Balanced Microphone Preamplifier

The INA163UA/2K5 fits low-level balanced audio acquisition because its low-noise, low-distortion architecture is intended for signals such as microphones and other low-impedance sources. The fixed 2.5-times gain adds modest signal level without requiring a general-purpose op-amp stage. Place the device close to the connector and maintain short, symmetric input traces so that cable pickup and ground differences do not become significant relative to the source signal. The current-feedback topology provides the bandwidth and dynamic-response behavior needed for audio paths. Confirm the available output swing, input common-mode range, reference connection, and supply headroom in the manufacturer datasheet before setting the microphone bias and downstream gain.

🏭

Industrial Bridge Sensor Interface

The INA163UA/2K5 is suitable for the input stage of an industrial bridge measurement when the differential millivolt-level signal must be amplified while rejecting common-mode voltage. Its 2.5-times fixed gain provides an initial signal increase, and its low-noise, low-distortion characterization supports precision measurement chains. The dual supply range of ±4.5 V to ±18 V allows a centered output around ground when equal positive and negative rails are used. Keep the bridge excitation return and sensor ground paths away from switching-node currents. Verify input common-mode limits under worst-case bridge imbalance and confirm that the analog-to-digital converter receives the resulting signal without exceeding its input range.

💊

Medical Signal Conditioning

The INA163UA/2K5 can serve as a low-level front-end element in medical instrumentation when the design requires low noise, low distortion, and differential signal handling. The fixed 2.5-times gain is appropriate as an initial conditioning stage before higher-gain or conversion circuitry. Dual supplies allow the output to remain centered around ground, which can simplify downstream acquisition when system power rails are symmetric. Because medical designs also depend on isolation, leakage, and application-specific validation, this amplifier should be treated as one block within the complete signal chain. Follow the pin-description and application sections of the manufacturer datasheet, and independently verify patient-protection, diagnostic, and regulatory requirements before production use.

🖥️

Precision Data Acquisition

The INA163UA/2K5 is useful in a precision data-acquisition front end when a differential sensor output must be conditioned before conversion. Its 2.5-times fixed gain offers a defined scaling factor, while the current-feedback architecture is intended to provide wide bandwidth and excellent dynamic response. Place the amplifier near the sensor or connector and route the differential pair as a compact pair to minimize conversion of common-mode noise into differential error. Use a quiet reference connection and confirm the amplifier output can drive the input network of the following converter without violating output-swing limits. The manufacturer application information and pin table should govern supply decoupling, feedback connections, and operating limits.

🎧

Audio Line-Level Conditioning

The INA163UA/2K5 can condition balanced audio-line signals where modest fixed gain, low distortion, and broad dynamic response are important. Its 2.5-times amplification is useful as an input stage rather than the sole high-gain element in a mixer or preamplifier. The low-noise architecture helps preserve quiet passages, while the low-distortion design is valuable when cascading multiple analog stages. Connect the balanced source to the designated differential inputs and use the datasheet-defined reference arrangement for the downstream circuit. Keep analog return currents separate from digital and power-converter paths, and verify headroom at maximum signal level so that neither the amplifier output nor the following stage approaches clipping.

🧩

Low-Level Sensor Measurement

The INA163UA/2K5 is appropriate for conditioning low-level differential sensor outputs where a fixed 2.5-times gain and noise performance are more useful than adjustable gain. It can provide a clean, scaled representation of a sensor centered around ground while rejecting voltage common to both input terminals. The instrument-amplifier function simplifies the input stage compared with a discrete differential-amplifier network, although external filtering and output buffering may still be required. Evaluate sensor output impedance, cable length, common-mode excursions, and sampling bandwidth together. Use the manufacturer datasheet to select stable external components and establish the reference potential required by the system ADC.

What is the INA163UA/2K5?
The INA163UA/2K5 is a Texas Instruments single-circuit instrumentation amplifier with a fixed gain of 2.5 V/V and a 14-pin SOIC package. According to the Texas Instruments INA163 product page, it uses current-feedback circuitry to provide wide bandwidth and excellent dynamic response. It is intended for low-level differential signals where common-mode rejection, low noise, and low distortion are important.
What is the gain of INA163UA/2K5?
The INA163UA/2K5 has a fixed gain of 2.5 V/V. The gain is established by the device variant rather than by an external resistor in the INA163UA/2K5 ordering configuration. According to the Texas Instruments INA163 ordering information, the /2K5 designation identifies this gain option, making it appropriate when a modest, fixed differential amplification is required.
What supply voltage does INA163UA/2K5 require?
The INA163UA/2K5 requires dual supplies totaling between 9 V and 36 V, corresponding to ±4.5 V through ±18 V. The typical dual supply is ±15 V. According to the Texas Instruments INA163 documentation and the component comparison information, the device uses dual power rails; adequate output headroom and input common-mode range must also be maintained.
What package does INA163UA/2K5 use?
The INA163UA/2K5 is supplied in a 14-pin SOIC, identified as package D by Texas Instruments. The manufacturer part-details page lists 14 pins and a surface-mount package. Use the INA163 manufacturer pin-description table when assigning PCB nets because the fixed-gain configuration still contains amplifier, reference, feedback, and power connections.
Where can I download the INA163UA/2K5 datasheet PDF?
The official INA163UA/2K5 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina163.pdf. The manufacturer document contains the electrical characteristics, gain-selection information, application information, and pin descriptions for the INA163 family. Consult its ordering table to confirm that INA163UA/2K5 is the exact gain, temperature, and package configuration being designed.
Where can I find the INA163UA/2K5 pinout?
The INA163UA/2K5 pinout is published in the Pin Configuration and Functions section of the official Texas Instruments INA163 datasheet. The part uses a 14-pin SOIC package, but engineers should use the manufacturer table rather than infer connections from another INA163 gain variant. The pin table identifies each package lead and the associated signal, reference, feedback, and supply function.
Is INA163UA/2K5 suitable for microphone and audio signal conditioning?
Yes, the INA163UA/2K5 is suitable for low-level balanced microphone and audio signal conditioning because it is optimized for low noise, low distortion, and wide bandwidth. Its current-feedback architecture supports dynamic response beyond that expected from many voltage-feedback instrumentation amplifiers. The fixed gain of 2.5 V/V is modest, so downstream amplification may still be required for very low-level sources.
Where can I buy INA163UA/2K5 online?
Use the Request a Quote form on this page to request INA163UA/2K5 pricing, current stock, minimum order quantity, and lead time. The exact ordering code, including the /2K5 gain suffix, should be stated in the request. Current commercial terms are established through the quote process rather than embedded as static customer-facing pricing on this product page.
What is the price of INA163UA/2K5?
Use the Request a Quote form on this page for the current INA163UA/2K5 unit price and available quantity breaks. The requested quotation should specify the exact MPN, INA163UA/2K5, and the required delivery quantity. Commercial pricing can vary with quantity, packaging, date, and supply conditions, so a current quotation is the appropriate purchasing reference.
What is the lead time for INA163UA/2K5?
Request the current INA163UA/2K5 lead time through the Request a Quote form on this page. Include your required quantity, approved delivery date, destination, and whether factory-sealed packaging is required. Texas Instruments identifies INA163UA/2K5 in the SOIC package, while shipment timing should be confirmed against current manufacturing and distribution conditions.
Is INA163UA/2K5 in stock?
Current INA163UA/2K5 inventory should be confirmed through the Request a Quote form on this page. State the exact quantity needed and any scheduled project demand so the supplier can return an availability and lead-time response. The device is listed by Texas Instruments in a 14-pin SOIC package, but live stock should not be inferred from a catalog entry.
What are the key specifications of INA163UA/2K5 that engineers should know?
The principal INA163UA/2K5 specifications are a 2.5 V/V fixed gain, one amplifier circuit, dual supply operation from ±4.5 V to ±18 V, a typical ±15 V supply, and a 14-pin SOIC package. Texas Instruments describes the device as a low-noise, low-distortion instrumentation amplifier based on current-feedback circuitry, with wide bandwidth and excellent dynamic response.
What is the best drop-in replacement for INA163UA/2K5?
The best drop-in replacement must match the 14-pin SOIC footprint, 2.5 V/V gain, electrical limits, and pin functions of INA163UA/2K5. INA166UA/2K5 is a same-manufacturer candidate appearing in comparison data, but its input and dynamic characteristics must be checked against the target design before substitution. No unqualified universal replacement is asserted without a complete parametric and pin-level review.
Can INA166UA/2K5 replace INA163UA/2K5?
INA166UA/2K5 may be considered as a same-brand, 2.5-gain candidate, but replacement requires verification of its 14-pin pin functions, supply range, common-mode range, bandwidth, noise, distortion, and output behavior. The comparison information confirms that it is a distinct INA166 device rather than an identical INA163 orderable part. Validate the reference and feedback connections on the actual PCB before approving the change.
When should I choose INA163UA/2K5 instead of a generic instrumentation amplifier?
Choose INA163UA/2K5 when the design requires a fixed 2.5-times differential gain, low noise, low distortion, current-feedback bandwidth, and a 14-pin SOIC implementation. Texas Instruments specifically identifies low-level audio, industrial instrumentation, and medical applications as suitable areas. A generic amplifier may be preferable only if its gain, bandwidth, common-mode range, supply behavior, and pinout are at least as suitable.
What is the operating temperature range of INA163UA/2K5?
The Texas Instruments product-details listing specifies an operating temperature range of -40 °C to +85 °C for INA163UA/2K5. Some comparison pages report a broader upper limit, but the manufacturer ordering information is the controlling reference for the exact orderable MPN. For industrial equipment, verify ambient temperature, self-heating, and the system enclosure conditions.

工程參考資料,適用於 INA163UA/2K5 — 比較、設計指引及合規資訊。

選型指南

Choose INA163UA/2K5 when the PCB requires the INA163 family's current-feedback instrumentation-amplifier behavior, a fixed 2.5-times gain, dual ±4.5 V to ±18 V operation, and a 14-pin SOIC footprint. It is particularly suitable for low-level balanced audio, bridge-sensor, medical instrumentation, and precision data-acquisition inputs where low noise and low distortion are important. Consider INA166UA/2K5 only after checking its pin functions, bandwidth, noise, distortion, common-mode range, stability, and output drive against the existing INA163 design. Do not substitute INA163UA without confirming its gain and external connection requirements. Because only two same-brand candidates could be identified without asserting unsupported cross-brand equivalence, every approved replacement should undergo signal-level, stability, common-mode, supply, and PCB-footprint validation.

與替代品比較

參數 本產品 INA166UA/2K5 INA163UA
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D)
Product Family INA163 INA166 INA163
Mounting Type Surface mount Surface mount Surface mount

主要差異化特點

  • Exact fixed-gain ordering option (對比INA163UA)
  • INA163 current-feedback performance positioning (對比INA166UA/2K5)
  • Manufacturer-published ordering configuration (對比INA163UA)

設計說明

Route the two differential inputs as a close, symmetric pair and connect them directly to the INA163 pins according to the manufacturer pin-description table. Place the device near the source connector or sensor to minimize pickup of external electromagnetic noise. Keep the input path away from switching inductors, power-converter return currents, and digital clock edges because even a small differential conversion of common-mode noise can become significant at microphone or sensor signal levels.

Use the minimum dual-supply voltage permitted by the design, but confirm that the selected rails provide adequate input common-mode range and output swing for the complete signal range. Texas Instruments specifies operation from ±4.5 V to ±18 V. Place supply-decoupling components close to the relevant pins, connect the ground return thoughtfully, and avoid adding filtering capacitance at the input pins that could alter the current-feedback network's stability or bandwidth.

Establish the reference connection and any external feedback or filtering components exactly as shown in the INA163 manufacturer's application information. Current-feedback amplifiers can interact with excessive output loading and unsuitable output capacitance, so avoid adding an arbitrary output capacitor or low-impedance load without checking stability. Evaluate the complete input-to-output network with the intended source impedance and cable capacitance, particularly for the 2.5-times fixed-gain configuration.

Do not substitute a different INA163 gain option solely because it uses the same 14-pin SOIC outline. Gain-set options can use different feedback connections, while INA166UA/2K5 belongs to a different device family. Compare pin functions, supply limits, common-mode range, bandwidth, noise, distortion, and output behavior before treating either listed candidate as a drop-in replacement. Confirm the exact INA163UA/2K5 ordering code during incoming inspection.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No definitive compliance status was stated in the manufacturer page excerpts or distributor results. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals status using current manufacturer documentation before production release.

相關搜尋

INA163UA/2K5 INA163UA/2K5 datasheet INA163UA/2K5 datasheet pdf INA163UA/2K5 pinout INA163UA/2K5 equivalent INA163UA/2K5 replacement INA163UA/2K5 cross reference INA163UA/2K5 price INA163UA/2K5 stock Texas Instruments INA163UA/2K5 INA163UA/2K5 2.5 gain INA163UA/2K5 SOIC-14 INA163UA/2K5 instrumentation amplifier INA163UA/2K5 vs INA166UA/2K5 INA163UA/2K5 microphone amplifier

相關元件與詞彙

Texas Instruments INA163UA/2K5 INA166UA/2K5 INA163UA INA163 INA166 instrumentation amplifier differential amplifier analog amplifier semiconductor low-dropout? no current-feedback architecture common-mode rejection low-noise amplifier low-distortion amplifier fixed gain 2.5 V/V gain dual supply ±4.5 V minimum supply ±18 V maximum supply 14-pin SOIC SOIC package family surface mount audio signal conditioning bridge sensor interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情