INA2141PA - Dual G=10/100 Amplifier | Texas Instruments
MPN: INA2141PA ✓ فعالINA2141PA جائزہ
An instrumentation amplifier is a specialized analog signal-conditioning IC that amplifies the voltage difference between two inputs while rejecting signals common to both inputs. Its application hierarchy is instrumentation amplifier, differential amplifier, analog amplifier, signal-conditioning IC, and semiconductor. This makes the INA2141PA appropriate for bridge-based sensing, current measurement, and low-level differential signal acquisition.
The INA2141 family offers two supported gain choices, 10 and 100, allowing a designer to select sensitivity according to the expected sensor output. The dual-channel architecture is useful when the system must measure two related quantities, reduce component count, or preserve consistent analog characteristics across channels. Its through-hole PDIP package supports conventional PCB assembly and prototype or repair workflows.
According to the manufacturer product page, INA2141 is a low-power instrumentation amplifier intended for precision differential signal conditioning. The device family combines differential input handling with fixed-gain operation, reducing the need for discrete op-amp networks around bridges and sensors. Its dual-channel arrangement also simplifies layout when several low-level signals must be conditioned before conversion or processing.
Typical uses include weighing and force sensing, industrial bridge interfaces, current-shunt measurement, biomedical instrumentation, and factory automation. The gain choices make the device useful when a modest input range requires amplification by 10, while a smaller signal such as a millivolt-level bridge output may benefit from the gain-100 setting.
For PCB design, place each instrumentation-amplifier channel close to its source to minimize differential pickup and keep high-impedance input routing away from switching nodes. Use a quiet ground reference and follow the manufacturer pin-description table for supply, input, reference, and output connections. Confirm the complete electrical limits, common-mode range, output swing, and recommended external-component values in the manufacturer datasheet.
This page organizes the exact package and family information with engineering-oriented application guidance, replacement analysis, comparison fields, and practical layout considerations. It is intended to help engineers confirm fit before committing the INA2141PA to a new sensor-conditioning board.
کے لیے ڈراپ اِن متبادل INA2141PA — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں INA2141PA (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںINA2141PA زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Dual instrumentation amplifier |
| Number of Channels | 2 circuits |
| Gain Option 1 | 10 V/V |
| Gain Option 2 | 100 V/V |
| Power Classification | Low power |
| پیکیج | 16-pin PDIP |
| Terminal Count | 16 terminals |
| ماؤنٹنگ اسٹائل | Through-hole |
| Temperature Grade | Industrial |
INA2141PA 16-pin pdip پن کنفیگریشن گائیڈ
INA2141PA (16-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں INA2141PA.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
INA2141PA کے لیے موزوں ہے 6 ایپلیکیشنs: Load-Cell and Weighing Systems, Industrial Current-Shunt Measurement, Precision Bridge Sensor Interfaces, Biomedical Signal Conditioning, Factory Automation and Control I/O, Test and Measurement Front Ends.
Load-Cell and Weighing Systems
The INA2141PA is well suited to two-channel bridge-sensor conditioning because it combines differential instrumentation-amplifier operation with selectable gains of 10 and 100. A load cell normally produces a small differential voltage around a common-mode reference, and the two gain choices provide useful sensitivity options for different bridge sensitivities. The dual arrangement can support one measurement channel for load sensing and another for temperature compensation. Place the amplifier close to the bridge output, keep the differential input traces short and matched, and connect the reference input to the system ground strategy used by the bridge and analog front end. Verify the complete common-mode range and output swing for the bridge excitation and mechanical load range before finalizing the gain selection.
تجویز کردہ
Industrial Current-Shunt Measurement
The INA2141PA can condition two differential current-shunt signals when their amplitudes fall within the gain-10 or gain-100 operating range. Instrumentation-amplifier architecture is useful in power-monitoring and industrial-control systems because the desired current information is represented as a small differential voltage across a shunt. The two channels permit simultaneous monitoring of a system supply and an individual load. Keep each shunt in the high-current power path, while routing the sense traces as a tight differential pair to the amplifier. Verify shunt common-mode voltage, amplifier input limits, output swing, and bandwidth at the selected gain; these electrical conditions determine whether the INA2141PA can safely replace a discrete difference-amplifier network.
تجویز کردہ
Precision Bridge Sensor Interfaces
The INA2141PA provides a practical dual-channel interface for pressure, strain, and other bridge-based sensors whose outputs require differential amplification. The selectable gain of 100 supports lower-level sensor signals, while gain 10 can serve higher-output bridges without unnecessary amplification. Its instrumentation-amplifier configuration is intended to reduce common-mode pickup, which is important when the sensor output is small relative to the bridge excitation voltage. Maintain a quiet reference node and route each input pair away from switching power stages. The design should also account for sensor excitation stability, amplifier gain error, input offset, output range, and the acquisition bandwidth required by the mechanical measurement.
تجویز کردہ
Biomedical Signal Conditioning
The INA2141PA can serve as the first analog stage for low-level differential biomedical signals when the selected gain and electrical limits match the sensing electrodes. The dual-channel structure can process two related physiological signals while maintaining a consistent amplifier architecture. Because biomedical instrumentation is sensitive to offset, noise, interference, and patient-safety isolation requirements, engineers must confirm the complete datasheet limits and the system's applicable isolation and regulatory design. Keep input routing short, protect sensitive nodes from contamination, and use a low-noise reference arrangement. The INA2141PA should only be selected after verifying that the gain-10 or gain-100 mode supports the electrode signal and downstream converter input range.
تجویز کردہ
Factory Automation and Control I/O
The INA2141PA fits factory automation modules that must measure two low-level differential inputs and present conditioned analog signals to a controller or data converter. Selectable gains of 10 and 100 allow the same device family to cover two signal ranges when each channel is configured independently. Its through-hole package is also convenient for legacy industrial control boards, test fixtures, and maintenance platforms that use through-hole assembly. Keep sensor and amplifier grounds arranged to prevent switching currents from entering the differential input loop. Validate the supply requirements, input common-mode range, output swing, and operating temperature against the machine's environment. Protection, filtering, and isolation may need separate components depending on the field wiring.
تجویز کردہ
Test and Measurement Front Ends
The INA2141PA is appropriate for bench and laboratory front ends that acquire two differential signals with gains of 10 or 100. Instrumentation-amplifier behavior simplifies conditioning of bridge outputs, voltage-divider differentials, and other small signals that share a substantial common-mode component. The dual package reduces the number of amplifier sections required in a multi-channel instrument while retaining a straightforward 16-pin PDIP layout. Use a low-noise supply, a stable reference arrangement, and symmetrical routing between the differential inputs. Before setting the gain, confirm the signal's bandwidth, input limits, output swing, offset, and gain accuracy against the acquisition system. The manufacturer datasheet should also guide selection of any recommended external resistors or capacitors.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا INA2141PA — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Package | 16-pin PDIP |
| Brand | Texas Instruments |
| Number of Channels | 2 circuits |
| Gain Options | 10 and 100 V/V |
| Architecture | Low-power instrumentation amplifier |
| Mounting Style | Through-hole |
| Temperature Grade | Industrial |
اہم امتیازی خصوصیات
- Two measurement channels in one package (بمقابلہSingle-channel instrumentation-amplifier options)
- Two selectable gain choices (بمقابلہFixed-gain instrumentation amplifiers)
- Legacy-compatible through-hole assembly (بمقابلہSurface-mount instrumentation amplifiers)
ڈیزائن نوٹس
Route each differential input as a compact pair and place the INA2141PA close to the sensor or shunt source. Keep the two traces symmetrical, minimize loop area, and avoid routing them beside switching nodes, relay contacts, motor traces, or high-current power paths. Use a continuous ground reference beneath the analog section when board space permits, and connect the amplifier reference node according to the manufacturer application circuit.
Do not select a gain solely from the nominal sensor output. Check the minimum and maximum signal, input common-mode range, output voltage swing, gain error, offset, and required bandwidth at the selected gain setting. The gain-100 mode can amplify input offset and reduce usable output headroom, while a gain-10 choice may not provide enough signal for the downstream converter. Perform worst-case calculations across supply tolerance and sensor excitation variation.
Keep analog and digital return currents separated as far as practical, especially when the INA2141PA is used near a switching supply, microcontroller, or display interface. Place any required bypass capacitors close to the relevant supply pins, use short ground returns, and avoid long shared copper paths beneath sensitive input routing. Check the manufacturer pin-description table and recommended component values before releasing the layout.
Choose gain and bandwidth together rather than maximizing gain in isolation. Higher gain improves sensitivity to small differential signals but can amplify offset, noise, and bandwidth limitations. For long sensor cables, add appropriate input filtering or protection and validate the complete signal chain with the actual source impedance. Confirm that the common-mode and differential input limits remain satisfied during startup, fault conditions, and sensor disconnection.
تعمیل کی معلومات
The available manufacturer product-page excerpt does not state material-compliance or automotive qualification status for INA2141PA. Review the current Texas Instruments compliance and qualification documentation for the exact orderable device.